新霍构造东翼Es_3~(3-4)储层特征及其影响因素分析

阐述了新霍构造东翼Es_3~(3-4)的储层特征,分析了影响储层孔隙发育的主要因素,认为储层压实作用强烈,原生孔隙不发育,而异常高压和有机质热演化造成溶蚀作用发育形成的次生孔隙是该区主要的储集空间;次生孔隙发育于3600～3900m深度段。在次生孔隙研究基础上,预测了下一步勘探方向。     

用核磁共振技术确定岩石孔隙结构的实验研究

目前核磁共振技术对岩石的孔隙结构进行评价还停留在定性评价阶段。虽然多数核磁实验室开展了核磁共振评价孔隙结构的研究工作，建立了转换模型，但由于转换系数无法有效地确定，还不能进行应用。通过对岩心核磁共振T2谱与压汞孔径分布的对比，建立了转换模型系数与孔渗比的关系，同时考虑了顺磁物质对转换系数的影响，提出了确定转换模型系数的方法，为核磁共振技术进行孔隙结构的定量评价提供了新的方法。     

钛镍形状记忆合金的研究进展

从应用角度简要介绍了钛镍合金的研究和应用状况，简明地评述了它的物理冶金基础、热机械行为和力学模型的研究情况．     

盐湖沉积储层孔隙结构特征及演化模式--以马王庙油田为例

盐湖沉积条件下的沉积环境及储集层特征等具有与淡水沉积不同的特征,通过对江汉盐湖盆地马王庙地区储层孔隙结构特征的研究,揭示了孔隙结构的宏观及微观特征.该区新沟咀组下段砂岩储层孔隙类型以粒间溶孔为主,喉道主要为片状、弯片状及点状喉道.Ⅱ、Ⅲ油组的物性比Ⅰ油组好,平面上孔隙分布具分区性.孔喉配置主要为大孔中喉,次为大孔粗喉及中孔中喉.孔隙结构受沉积环境及成岩作用的影响.以马36井Ⅱ油组砂岩为例,建立了孔隙演化定量模式.     

基于径向矢量的不变性形状分类方法

介绍一种利用径向矢量提取形状特征的方法，着重于分析二维图形的不变性，提出一种带有方向因子的径向矢量描述，该矢量以图形边界弧长为自变量，完整地刻画了图形特点，克服了非凸图形识别中存在的多义性，以归一化的特征矢量的输入，采用三层神经网络为分类器，在字符及军事目标不变性识别中取得了令人满意的结果。     

Theory and characteristics of novel variable reluctance 1X resolver

Although brushless resolvers have been used widely as angular position transducers, they are expensive due to their intricate construction, involving a rotary transformer to supply the exciting coils wound on the rotor poles with the current. It is shown theoretically in this paper that the resolver without rotary transformer or brushes can be realized by simple construction, which consists of the stator core with both 4-poles exciting windings and 2-poles output ones and the rotor core carrying no windings. In this resolver the rotor core has minimum gap at one side and a maximum gap at another side of the diameter. It is characterized by an outer surface form that makes the fluctuation part of gap permeance very in proportion to cos θ, where θ represents the angular position of a point in the air gap with respect to the origin on the rotor, the point of minimum air gap. The method determining the rotor form to embody the aforementioned gap permeance variation is also shown. It has been confirmed not only by simulation but also experiment that the 2-phase output voltages of a model designed based on the theory have sinusoidal waveforms with very small harmonic contents. Moreover, the rotor position detected by processing the output voltages through the conventional resolver/digital converter was within acceptable engineering accuracy.     

提高大口径金属主镜面形精度的方法

分析了影响Ｒｉｔｃｈｅｙ－Ｃｈｒｅｉｔｉｅｎ光学系统中金属主反射镜面形精度因素，采用有限元法对立交易的加工过程及其安装进行了模拟，指出提高主镜的面形镜度，既要合理主镜材料的热处理工艺，也要对加工参数进行控制。良好的稳定化处理可以有效地消除材料内部的残余应力，保证主镜尺寸的稳定性。提高加工基准的精度，并采用组合加工镜面，可以大大提高主镜的面形精度，最后，给出了主镜的干涉仪检测结果。     

Mechanics of sintering materials with bimodal pore distribution. III. Kinetics of sintering combined with various forms of loading and adhesion conditions

A study has been made on the effects of loading scheme and conditions restricting macroscopic strain on the work-hardening kinetics and strain accumulation in the solid state in sintering materials with bimodal pore size distributions. Active loading intensifies the reduction in the small pores. The greatest effect comes from combining sintering with hydrostatic compression. At the same time, kinematic constraints (partial or complete adhesion in surfaces) substantially retards the shrinkage of large pores, which means that the porous structure can be controlled. __________ Translated from Poroshkovaya Metallurgiya, Nos. 5–6(449), pp. 10–15, May–June, 2006.     

时效处理对 TiNi 合金相变与性能的影响

通过用ＴＥＭ等方法研究热处理制度（固溶处理、时效处理）对ＴｉＮｉ合金相变组织和性能的影响，找出了最佳热处理制度。结果表明，在４５０～５００℃进行时效处理，Ｔｉ－５０．８ａｔ％Ｎｉ的合金出现了大量的Ｔｉ３Ｎｉ４相，且恢复率最高。     

Gasification reactivity of charcoal with CO2. Part I: Conversion and structural phenomena

The gasification reaction of fir charcoal with CO₂ was studied by isothermal thermogravimetric analysis under kinetic control. The derived reaction rate (r=dX/dt) as a function of the converted carbon mass (X) was compared with random pore model predictions and found to be much higher at elevated conversion levels than predicted by theory. Similar enhanced reaction rate behaviour was evidenced after removing the natural alkali catalyst from the charcoal by acid washing, suggesting that with untreated charcoal the late reaction rate contribution stems from both, catalytic and additional structure effects. Literature attributes the unpredicted late reaction rate behaviour to the disintegration of the porous char particle into small fragments, which, in line with percolation theory predictions, seems to occur only after a critical conversion level has been reached. However, our gasification data reveal a gradual rise in the charcoal reactivity thereafter, suggesting a breaking up (embrittlement) of the solid phase accompanied by the exposure of fresh surface area from fracturing. The original random pore model derivation given by Bhatia and Perlmutter is extended to account also for these peculiarities and the resulting kinetic relation described our reaction rate data well over the entire conversion range.