便携式无线通信中的陶瓷技术

重点讨论了现代无线通信中关键元器件之一滤波器的发展进程,中、高频及微波滤波器的主要类型及性能特点。低损耗、高介电常数陶瓷在RF和IF滤波器中的应用,能够实现无线设备的微型化。对制备滤波器的介质陶瓷材料的要求是:在所使用的波段内,相对介电常数r要大,可缩小介质元件的尺寸;品质因数Q要高,可获得良好的滤波特性及通讯质量;谐振频率的温度系数f接近于零或可调节,以达到整机电子回路的要求。     

Quantitative description of the microstructure–porosity of sialons and iron silicide inclusions

Sialon ceramics are a modern type of engineering ceramics with excellent mechanical, thermal and corrosion resistant properties. This paper describes the structure characterisation of porous sialon ceramics. It is possible to significantly improve the strength and crack resistance of sialon ceramics as a result of a reduction of the volume fraction of porosity.     

Effect of fiber types on relevant properties of porous asphalt

The research was conducted to evaluate the effects of cellulose and polyester fibers on the properties of porous asphalt mixes, using the tests of draindown, abrasion, volumetric properties, rutting, and moisture damage. Images of scanning electron microscopy and X-ray computerized tomography were adopted to identify the microstructure of the fiber and inner stone skeleton of porous asphalt. The influence of rutting parameter （G＊/sin δ） of asphalt modified by different fibers on the rutting resistance of the mixes was investigated. Based upon MOHR-COULOMB theory, the cohesion and the angle of internal friction of the mixes were derived from both indirect tension and unconfined compression strength. The experimental results indicate that fibers mainly stabilize asphalt binder and thicken asphalt film around aggregates. Furthermore, they result in the improved mechanical strength of porous asphalt mixes at high temperature slightly. From comparison analysis, cellulose fibers appear to perform better than polyester fibers in porous asphalt mixes.     

Signature analysis and defect detection in layered manufacturing of ceramic sensors and actuators

This paper presents the concept of a process signature for the use of online signature analysis and defect detection in the layered manufacturing (LM) of ceramic sensors and actuators. To achieve the high quality of parts built by the fused deposition of ceramics (FDC), an online process-monitoring system is implemented to detect the processing defects. Using a process signature extracted from the image of a layer captured by the monitoring system, an ideal image is created that is then compared to the original image to detect and identify the defects. Some results of signature analysis and defect detection for single-material and multi-material parts are also presented.Received: 22 July 1999, Accepted: 21 October 2001, Published online: 29 October 2003 Correspondence to: Mohsen A. JafariThis work was supported by the Office of Naval Research under grant # N-0014-96-1-1175. Ref. US Patent # S-5738817, April 14, 1998.     

Photoacoustic Thermal Characterization of Porous Rare-Earth Phosphate Ceramics

The laser induced non-destructive photoacoustic technique has been employed to measure the thermal diffusivity of lanthanum phosphate ceramics prepared by the sol–gel route. The thermal diffusivity value was evaluated by knowing the transition frequency between the thermally thin to thermally thick region from the log–log plot of photoacoustic amplitude versus chopping frequency. Analysis of the data was carried out on the basis of the one-dimensional model of Rosencwaig and Gersho. The present investigation reveals that the sintering temperature has great influence on the propagation of heat carriers and hence on the thermal diffusivity value. The results were interpreted in terms of variations in porosity with sintering temperature as well as with changes in grain size.     

中间包CaO质陶瓷过滤器滤除夹杂效果的研究

对鞍钢三炼钢厂中间包应用的CaO质陶瓷过滤器进行了实验研究，从装有陶瓷过滤器和未装陶瓷过滤器的挡墙侧水口上方及各自的连铸坯中取样，并用电解法和吸收光度法测定了夹杂物的总含量及分量。实验结果表明，陶瓷过滤器对于滤除钢液中的Al2O3、SiO2夹杂作用显著。     

二次电池电极基板用复合多孔金属材料的研究

介绍了一种复合金属多孔体的制备及其方法，首先以泡沫塑料为芯膜，经过导电化处理使其具有导电性，其次进行电沉积金属铁，再进行电沉积金属镍，经过热处理后可制备出复合金属多孔体。该复合金属多孔体用铁取代金属镍，其抗拉性能优于单质泡沫镍，同时可以降低制造成本，主要用于载体如电池电极。     

多孔粒状铵油炸药在乌海矿业公司的应用

通过对多孔粒状铵油炸药质量影响因素的分析，结合乌海矿业公司爆破的特点，提出了保证炸药加工质量的合理参数。     

分形理论在固体吸附式制冷系统中的应用研究

固体吸附式制冷系统中吸附剂一般是多孔介质结构，吸附剂的内部结构特征对传热特性和吸附质的传质特性有直接影响，进而影响吸附解吸时间。本文探讨利用分形理论来分析固体吸附剂的结构特点，为目前通过对吸附剂的固化处理来提高吸附剂的传热速率的处理方法提供理论上的分析，并指出最佳分形维数的分形结构。     

聚合物分解法制备微波介质陶瓷粉体的研究

对采用聚合物分解（Ｐｅｃｈｉｎｉ）法制备ＭｇＴｉＯ＿３粉体进行了研究。通过对聚合中间产物进行红外光谱分析，研究了聚合物分解法制备ＭｇＴｉＯ＿３陶瓷粉体的聚合反应过程及产物。并与用传统固相反应法制备粉体工艺进行对比．从而证明用聚合物分解法可获得单一ＭｇＴｉＯ＿３相材料．并可降低粉体的煅烧温度。