氧化铈对改善ZTM陶瓷性能的作用

工业用电熔莫来石原料中含有钾、钠等杂质，而化学法制备的高纯莫来石中这些杂质含氏，因而以氧化锆增韧这两种莫来石制备陶瓷，发现其力学性能温度的变化趋势有较大差异。后者随温度升高力学性能反而有所增长。研究发现这一变化与原料中杂质含量有关。     

流延热释电厚膜陶瓷制备单元红外探测器

本文报道采用流延法制备的热释电厚膜陶瓷材料直接装配的单元红外探测器，该方法大大简化了目前探测器的制备工艺，极大地提高了材料的利用率，器件的性能也达到了目前探测器的水平。     

多孔材料气体流量的简便计算

采用简便方法计算气体通过多孔材料的流量。当层流时，流量与压差按线性关系计算；紊流时，应按幂函数关系计算。本文提出了计算公式。     

Solid-state NMR as a probe of porous catalysts and catalytic processes

The power of solid-state NMR for the interrogation of porous catalytic materials is illustrated using three examples. First, for the investigation of catalytic processes occurring within the confines of a microporous catalyst NMR is shown to reveal both the details of shape-selectivity and the nature of internal surface species. Second, NMR is shown to be a powerful short-range tool to reveal precise structural information on highly disordered microporous titanosilicates. Despite long-range disorder the short-range order is maintained and can be easily studied. Finally, the same utility of probing short-range chemical phenomena is shown to be crucial for the investigation of novel-ordered-amorphous-mesoporous materials known generically as M41S. This class of material is currently one of the most important with potential catalytic application.     

陶瓷企业公共关系与市场营销

公共关系是提高企业形象竞争力的法宝,企业将公共关系运用于营销活动之中,能够与社会公众建立、维持和发展良好的互利关系,通过树立良好的企业形象和信誉,从而为企业市场营销创造一个和谐的环境。从公共关系与市场营销的内涵入手,对市场营销中公共关系的作用和具体应用进行了初步的分析,希望通过这些分析,能够引起陶瓷企业在营销活动中对公共关系的注意。     

复相陶瓷导电性与其粒径级配的关系研究

通过对无序渗流模型的修正，建立了具有不同特征尺寸的两相无序体系的导电模型，推导了相关关系式，将其结果与相复合导电陶瓷的实验结果进行了比较，结论相当一致。由此揭示了陶瓷生料的两相粒径分布对复合导电陶瓷导电性的影响。     

利用分形几何确定多孔介质的孔尺寸分布

提出了利用分形几何确定多孔介质孔尺寸分布的方法。考虑多孔介质中孔间的屏蔽，采用此方法得到的孔尺寸分布范围比采用平行孔模型宽，分别采用本方法和平行孔模型测定γ－Al2O3催化剂的孔尺寸分布，构造简单立方体三维网络模型模拟压汞过程，并将模拟曲线与γ－Al2O3压汞实验曲线比较，结果表明，采用本方法所得孔尺雨分布优于平行孔模型所得孔尺寸分布。     

Dielectric behaviour of glasses and glass ceramics in the system BaO-PbO-TiO2-B2O3-SiO2

Glasses with varying molar ratios of PbO/BaO in the system BaO-PbO-TiO₂-B₂O₃-SiO₂ were prepared keeping (BaO + PbO)/TiO₂ ratio equal to one. The glasses were ceramized by two-stage heat treatment. X-ray diffraction indicates that PbTiO₃ crystallizes in lead-rich glasses while BaTiO₃ precipitates in barium-rich compositions. Solid solution (Ba, Pb)TiO₃ does not seem to crystallize over the entire range of compositions. Simultaneous presence of PbO and BaO in the initial glass composition reduces the yield of ferroelectric phase. Dielectric properties have been interpreted in terms of microstructural features.     

Holmium-doped Porous Silicon Prepared by a New Electrochemical Approach and Its Photoluminescence

Ｐｏｒｏｕｓｓｉｌｉｃｏｎ（ＰＳ）ｗａｓｆｏｕｎｄｔｏｅｍｉｔｖｉｓｉｂｌｅｌｕｍｉｎｅｓｃｅｎｃｅａｔｒｏｏｍｔｅｍｐｅｒａｔｕｒｅｂｙＣａｎｈａｍｉｎ１９９０［１］．Ｔｈｉｓｐｈｅｎｏｍｅｎｏｎｉｍｐｌｉｅｄａｐｏｔｅｎｔｉａｌａｐｐｌｉｃａｔｉ...     

基于格子Boltzmann方法的换热器优化模拟

为优化换热器的结构设计,用格子Boltzmann方法(Lattice Boltzmann Method,LBM)结合多孔介质模型模拟换热器内的换热,研究雷诺数、普朗特数和热扩散率比的变化对温度场和换热性能的影响.模拟结果表明:在小雷诺数范围内,随着雷诺数的增加,努塞尔数先增加后减小,即存在一个使换热性能达到最好的雷诺数;随着普朗特数的增加,努塞尔数减小,换热性能降低;随着热扩散率比的增加,换热性能提高.分析不同管柱排列方式对换热性能的影响,结果表明:叉排的换热效果明显优于顺排,当横向节距等于2时,对于均匀顺排或叉排,努塞尔数均随纵向节距的增加而减小,这与实验结果相符;对于非均匀叉排,采用"前密"或"中间密"的排布方式有利于换热.