可控环量船用翼的数值模拟和试验研究

本文提出一种可控环量船用翼数值模拟方法,其计算结果与最近Mclachlan的试验数据十分吻合。通过本文的计算,对广泛引用的Kind ＆ Maull的二维试验数据提出了修正。根据本文所作的三维可控环量帆翼的试验结果,与二维计算值的比较,指出它们之间所存在的显著差别。     

钢筋混凝土框架-剪力墙结构在强震作用下的非线性分析——Ⅱ、程序及算例

运用文献[1]所介绍的分析原理与方法,编制了强震作用下钢筋混凝土框架-剪力墙结构非线性地震反应时程分析的程序。本文介绍该程序的功能、框图,以及利用该程序计算所得到的几栋钢筋混凝土结构的非线性地震反应分析结果。算例表明,本程序计算结果可靠,能很好地用于解释震害和预测地震时结构可能发生的破坏。     

圆筒形铸件缩松缩孔的产生原因及解决方法

针对圆筒形铸铁辊体冒口端面产生的缩松、缩孔缺陷，进行了举例说明、系统分析，找到了缺陷产生的原因及影响因素。通过解决措施的应用与实施，有效地克服了圆筒形辊体铸件冒口端面产生的缩松、缩孔缺陷，同时应用到其它大型圆筒形铸件中，都得到了良好效果。     

Time‐dependent heat transfer coefficient of a wall

A time‐dependent coefficient of heat transfer is proposed for the computation of thermal power required, so that a room temperature reaches a desired value within a given time. A mathematical formulation of the room heating transient phenomenon is constructed in a dimensionless form. Using an integral approximate solution an analytical expression for this coefficient is provided and it is verified by diagrams adopted by DIN 4701. Copyright © 2003 John Wiley & Sons, Ltd.     

Matrix mediated alignment of single wall carbon nanotubes in polymer composite films

Alignment of single wall carbon nanotubes (SWNT) in liquid crystalline (LC) polymer matrix imparting orientation to the nanotubes along the nematic director was studied by atomic force microscopy, measurements of electrical conductivity and Raman spectroscopy of the composite in the directions parallel and perpendicular to the nematic director. The composites were prepared through dispersion of SWNT with LC monomer in a common solvent, their alignment in nematic monomer and consequent UV polymerization of the monomer. The anisotropy of electrical and optical properties of the system depends strongly on the concentration of the nanotubes in the range of 1-10% SWNT being especially strong for smaller concentrations and negligible at higher loads. A simple semi-quantitative model is suggested to account for the orientational behavior of nanotubes in nematic matrices. It successfully describes the observed anisotropy of physical properties at microscale (up to 200 μm) in terms of anchoring of the polymer chains to the nanotubes surface and adjustment of the nanotubes orientation to the nematic direction due to such coupling. The increasing disorientation of the nematic domains at higher nanotubes loads is explained as a development of larger number of LC defects induced by the nanotubes in the nematic matrix due to their intrinsic nature of aggregation. The anisotropy of physical properties at macro scale (several millimeters) is much smaller and less dependable on SWNT concentration because differently oriented LC domains effectively wash out the anisotropy.     

铝合金穿孔板吸声墙面施工技术

以教育部综合办公楼工程的机房铝合金穿孔板吸声墙面施工为例,介绍其固定件及吸声墙面的做法。     

管道内壁阴极保护技术

阴极保护技术已广泛应用于管道的外防腐,而在管道的内防腐中还存在只适用于大口径管道、保护距离短、阳极与管道内壁绝缘难、安装复杂等问题。为此,江汉油田设计院开展了管道内壁阴极保护技术研究工作。试验证明,管道内壁采用强制电流和牺牲阳极阴极保护完全可行,用在柔性阳极或带状锌合金、铝合金牺牲阳极上外套打孔塑料管或塑料网的安装方式成功地解决了管道内壁阴极保护存在的上述问题,具有适用范围广、施工工艺简单、经济方便等优点。文章着重介绍了塑料套管或塑料网阳极安装方式及其模拟试验、现场试验的条件和结果。     

土体中毛细水压力的研究

该文从毛细水产生负孔隙水压力概念入手 ,对较难确定的孔隙水压力系数以及较抽象的地下连续墙时效稳定分析等问题进行了定量计算 ,以期对工程实践有一定的指导作用     

阿曼Daleel油田分支井钻井液技术研究

对Daleel油田作业5区三分支水平井DL-59井井下复杂情况分析,室内测定了引起复杂情况的Nahr Umr泥页岩地层的矿物组分和粘土矿物含量,优选了适应在该泥页岩地层215.9 mm造斜井段的钻井液配方中的各种处理剂,最后研制出钻井液配方,通过DL-73井应用后,取得了良好的防塌效果.     

小浪底大坝心墙中高孔隙水压力的研究

土石坝的施工会在大坝心墙和地基中产生超静孔隙水压力。对于高土石坝，施工期心墙防渗体内产生的超静孔隙水压力难以有效消散，因此坝体内部可能会出现较高的孔隙水压力，这对大坝的稳定性和安全性将产生重要影响。黄河小浪底大坝坝高154m，是目前国内已建最高的心墙土石坝。本文利用基于Biot理论和剑桥模型的有限元固结程序对该大坝进行了二维平面应变固结分析，计算施工期及坝体竣工后心墙内的孔隙水压力。计算发现，坝体竣工时心墙中将出现较高的孔隙水压力，最大值为1250kPa，是上覆盖土重的62．5％，长期的观测资料也发现心墙内的孔隙水压力比较高。对比实测数据和有限元计算结果，发现小浪底心墙中出现最大的孔隙水压力可达1400kPa，而且实测消散速度要远小于有限元预测结果。这一结果充分说明高土石坝中可能产生较高的孔隙水压力，对此应予以足够的重视。