奥氏体耐热钢21-4N碳化物析出行为研究

通过对奥氏体耐热钢21-4N碳化物析出行为的研究,探讨了对性能的影响,提出了改善其综合性能的措施和方法.     

MBS树脂改性PVC的研究

研究了不同类型及用量的MBS树脂对PVC抗冲击性、光学性能、拉伸性能及加工塑化性能的改性效果以及加工条件等因素的影响。结果表明 :在低用量条件下 ,随MBS树脂含量增加 ,MBS/PVC抗冲击性能有所提高 ,光学性能略有下降。此外 ,MBS/PVC制品的拉伸性能和加工性能受MBS树脂类型及用量影响不大。     

石英砂脱水性能的研究

通过大量试验结果 ,研究了各种粒度范围的石英砂的脱水性能 ,包括沉降特性、过滤性能、极限压缩浓度等 ,为进行此类产品的固液分离提供了重要的参考数据     

PP-g-MAH对PA6/PP/TLCP三元共混物的增容改性作用

研究了PP-g-MAH对PA6／PP／TLCP三元共混体系的增容作用以及对共混物流变性能和力学性能的影响。通过共混物的DSC、SEM、POM、流变性能和力学性能测试，结果表明，PP－g-MAH对共混体系有明显的增容作用，共混物的力学性能（拉伸强度和冲击强度）得到提高；由于TLCP的加入，共混物的熔体粘度大大低于PA6的熔体粘度。     

岩石工程力学特性参数测定装置设计

岩石工程力学特性参数测定装置实现了对试验载荷的恒速率加载 ,可对压模的吃深和试验载荷进行连续记录 ,记录的数据可实时显示及处理 ,且动态显示试验岩石的特性曲线 (试验载荷—轴向应变 )。该装置体积小、可移动性强 ,且能一机多用。文章详细阐述该装置机械结构、电路和系统软件的设计等     

PAN共聚纤维的热氧化研究

本工作采用连续式实骏装置与方法,借助力学测试、X射线衍射、元素分析、红外光谱等技术,系统地研究了PAN共聚纤维在连续热氧化过程中化学、结构、性能间的联系,亦对PAN基碳纤维力学性能提高的途径进行了探讨。研究结累表明:在热氧化过程中,PAN共聚体系的热化学反应主要发生在250℃左右;其间纤维的序态结构变化剧烈,易使纤维产生结构缺陷,进而影响热氧化纤维力学性能的变化。     

国产CN—31催化剂与ICI65—2催化剂工业应用的比较

国产轻油预转化催化剂与进口催化剂相比,具有性能相当、价格低廉、供应方便等优势。国产预转化催化剂需在较高的液空速、温度较低的条件下实现烃类转化反应,生成含甲烷60%以上的富气。采用国产催化剂能明显反映性能价格比。文章对两种催化剂进行了工业应用比较和分析。     

Analysis and visualisation with host-based software – The features of STNAnaVist™

This article is based on experiences with data and text mining to gain information for strategic business decisions, using host-based analysis and visualisation (A/V), primarily in the field of patents. The potential advantages of host-based A/V are pointed out and the features of the first such A/V software, STN^®AnaVist™, are described in detail. Areas covered include the user interfaces, initial set of documents for A/V, data mining, text mining, reporting, and suggestions for further development.     

热强钛合金BT25组织与性能

介绍了前苏联航空发动机用热强钛合金（或高温钛合金）BT25的发展概况，并对BT25合金的成分特点、热处理强化优点等做了进一步阐述，给出了退火状态下的物理性能，在说明热强钛合金微观组织与力学性能关系的基础上给出了BT25合金的各种力学性能。     

Control of structure and tack properties of acrylic pressure‐sensitive adhesives designed by a polymerization process

Free radical emulsion polymerization of methyl methacrylate (MMA) and 2‐ethylhexyl acrylate (EHA) results in the synthesis of pressure‐sensitive adhesives (PSAs) with good tack properties. Management of both the copolymer composition and the polymerization process allows one to control the behavior of the PSA. Semicontinuous (SC) processes create polymer particles whose instantaneous composition is close to that of the feed particle The SC Mixture process (continuous feeding with comonomer blends) affords nearly homogeneous latex particles and PSA films. The SC Gradient process (separate feedings at inversely varying rates) affords heterogeneous particles and films. The Batch process leads to somewhat heterogeneous films, but the hard (MMA‐rich) microdomains are made compatible with their soft (EHA‐rich) matrix because of the assumed formation of tapered‐type copolymers. Tack measurements indicate the importance of the particle and film structures. Too much hardness or softness leads to unacceptable lacks of adhesion and cohesion, respectively. Homogeneous structures prove adequate, but their tack properties collapse with rising temperature. Heterogeneous structures, with extensive phase segregation, prove unsatisfactory because they lack adhesion and cohesion. Finally, the association of well‐balanced composition and compatible heterogeneity is the criterion for suitable PSA behavior. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 2749–2756, 2003