纳米级SiO2改性水泥胶砂作用机理研究

用XRD、TGA-DTA分析了纳米级SiO2改性水泥砂浆后的水泥基材料的性能变化,探索了纳米级SiO2的改性机理。XRD、TGA-DTA分析表明水泥砂浆被改性后,Ca(OH)2晶体取向程度降低,晶粒细化且呈无定型。改性后水化产物增多,导致强度增大。除了进行微观力学性能测试之外,用SEM测试评价了纳米级SiO2改性水泥砂浆后的微观形貌,发现在水泥基中添加纳米级SiO2能使水化速率增快,水化产物增多,龄期结构变得致密,导致强度增大,耐久性提高。     

水溶液晶体的空间生长及其地基模拟实验

空间水溶液晶体生长是通过搭载人造卫星、宇宙飞船和空间站等飞行器,在微重力条件下从水溶液中进行晶体生长实验.许多透明单晶体,诸如:KDP(磷酸二氢钾,potassium dihydrogen phosphate)、ADP(磷酸二氢铵,ammonium dihydrogen phosphate)、TGS(硫酸三甘氨酸,triglycine sulfae)、沸石和α-碘酸锂(α-LiIO3)等无机非线性光学晶体,尿素等有机非线性光学晶体以及蛋白质等生物晶体,均可采用水溶液法生长.美国、前苏联、西欧和日本等国在从事空间材料科学研究的高科技发展计划中,均把水溶液晶体生长作为一项重要项目.由于水溶液晶体生长方法的研究在地面上已有丰富的基础,而且具有温度低,能耗小,可实现原位实时观察等优点,所以,它是探索空间晶体生长原理和方法、研究晶体生长微重力效应的重要材料制备技术.由于空间晶体生长受搭载条件限制,空间实验的次数与地面相比是十分稀少的,为了获得空间实验的高成功率,在地面上必须建立相应的实验基地,开展深入的地基研究工作.本文将分别从空间实验和地基研究两个方面作系列介绍,包括蛋白质晶体,沸石晶体,α-LiIO3晶体的空间生长以及TGS,NaClO3(sodium chlorate,氯酸钠),Sr(NO3)2(strontium nitrate,硝酸鍶)和Ba(NO3)2(barium nitrate,硝酸钡)等晶体生长过程的原位实时观察,并展望了空间晶体生长的发展前景.     

锌釉SiO2-Al2O3性状图的基础研究

研究了锌釉的SiO2-Al2O3性状图。该实验是在确定锌釉的塞格尔式和SiO2、Al2O3变化图的情况下进行，即固定塞格尔式中碱性成分的摩尔量，而按照SiO2、Al2O3变化图有规律的改变SiO2、Al2O3的含量。分别在1100℃、1150℃、1200℃三个温度下，采用氧化气氛烧成制得样品。用肉眼法对样品进行表观效果分析，从而得到相应条件下的锌釉SiO2-Al2O3性状图。     

新型CO耐硫变换催化剂QDB-04的开发及应用

介绍了新型CO耐硫变换催化剂QDB-04的性能特点及工业应用情况，对Shell粉煤气化煤气第一变换炉反应深度的问题及控制第一变换炉“床层飞温”的办法进行了讨论，提出了ODB-04催化剂应用于低水气比Shell粉煤气化制氨变换工艺的设计方案。     

MICROSTRUCTURAL STUDY OF Fe-Cr-Al/Al COMPOSITE COATINGS DURING OXIDATION AND SULFIDATION AT 900 ℃

The microstructure of a composite coating system, which was composed of an inner layer of Fe-Cr-Al and an outer layer of aluminum, was studied after it was respectively oxidized and sulfurdized at elevated temperatures. Apart from the Al2O3 scale formed on the surface, the microstructure of the composite coatings exposed at 900℃ in air for 4h was a three-layer structure. The first layer consisted of a solid solution of Cr and Fe in α aluminum and an intermetallic compound FeAl3, while the second layer was a single phase of the aluminide and the third layer still remained the same appearance as the original Fe-Cr-Al coating.The microstructural observation of the specimen tested at 850-900 ℃ at low oxygen pressure and high sulfur pressure for 576h revealed that the surface coatings of the specimen had transformed into a duplex structure containing an outer layer and a thicker aluminide layer beneath. X-ray diffraction results showed that the out layer was composed of Al2S3 and Al2O3 and that AlCrFe2 was the main phase composition of the aluminide layer, with a few of Al2S3 and Al2O3 accompanied.     

Hot dip fine Zn and Zn-Al alloy double coating for corrosion resistance at coastal area

A new hot dip Zn-7Al alloy coating was performed on a structural steel by double coating of fine Zn and Zn-7 wt.% Al alloy, to prevent severe corrosion in coastal area. The alloy-coated steels were exposed to seaside, quasi-industrial, and rural districts to compare with conventional Zn coating. Double coating was significantly effective in preventing corrosion, particularly in a seaside. It was estimated from the exposure test for 10 years that the life of the Zn-7Al alloy-coated steel would be almost four times that of the Zn-coated steel in the seaside. A bending test showed that no exfoliation occurred at the interface between the coated alloy and substrate steel. TEM observation revealed that the excellent adhesiveness of the doubly coated fine Zn and Zn-7Al alloy to the steel substrate was due to formation of the interface region consisting of heterogeneous fine phase mixture of zinc, aluminium and iron.     

Comparison of single and coastal superphosphate for subterranean clover on phosphorus leaching soils

Coastal superphosphate, a partially acidulated rock phosphate (PARP), is being considered as an alternative fertilizer to single superphosphate for pastures in high rainfall (> 800 mm annual average) areas of south-western Australia. The effectiveness of single and coastal superphosphate, as P fertilizers, was measured in two field experiments using dry herbage yield of subterranean clover (Trifolium subterraneum). The experiments were started in April 1990 and were terminated at the end of 1993. In the years after P applications, soil samples were collected each January to measure Colwell soil-test P, which was related to plant yields measured later on that year, to provide soil P test calibrations.Relative to freshly-applied single superphosphate, the effectiveness of freshly-applied coastal superphosphate and the residues of previously-applied single and coastal superphosphate were less effective in some years (from 3% as effective to equally effective), and up to 100% more effective in other years. This large range in effectiveness values in different years is attributed to different climatic conditions. Soil P test calibrations were different for soils treated with single or coastal superphosphate. The calibrations were also different for different yield assessments (harvests) in the same year, and in different years. Consequently soil P testing can only provide a very crude estimate of the current P status of the soils.     

Hydrolysis of human horny cells by alkaline protease: Morphological observation of the process

The interaction of highly purified alkaline protease fromBacillus sp. KSM-K16 with the horny cells of human skin contained in skin grime was directly visualized by electron microscopy. It became clear that the protease first penetrates the horny cells and then adsorbs, mainly onto the internal structure of the cells at the initial stage of hydrolysis, and directly hydrolyzes the keratin filaments, though the marginal band surrounding them retains its original shape. Then, hydrolysate produced from the keratin filaments flows out of the cell, and early in the hydrolysis process keratin filaments decrease and then disappear, leaving a marginal band, i.e., the cell turns to a hollow state. As a result, the remaining marginal band loses support from inside the cell, thus promoting cleavage and dispersion. Until this stage in the protease reaction, the remarkable liberation of hydrolysis products as water-soluble protein does not occur.     

Evaluation of the agronomic effectiveness of natural and partially acidulated phosphate rocks in several soils using32P isotopic dilution techniques

The agronomic effectiveness of two natural phosphate rocks (PRs) from North Carolina (USA) and Togo and their 50% partially acidulated products (PAPRs) was evaluated in two greenhouse experiments using³²P isotopic dilution techniques, namely L and A_L values.In the first experiment rye grass was grown in a soil from Ghana. While the proportion of P in the plant derived from the P fertilizer (Pdff) ranged on. the average from about 10% for the PRs up to 80% for the PAPRs, the P fertilizer recovery was less than 1% for a 60-day growth period. In the second experiment, average values of P in the maize plants derived from the PAPRs ranged from 35% to 75% in 3 different soils. Both PRs were ineffective with the exception of North Carolina PR in the Seibersdorf soil. The P fertilizer recovery was 0.25% for the North Carolina PR in this soil whereas the recovery values ranged from 1.2% to 1.6% for the PAPRs.Mean values of the relative fertilizer efficiency estimated from the L values of each soil were less than 1% for the PRs whereas the values for the PAPRs which were dependent on soil type ranged from 20% up to 45%. The coefficient of relative effect of partial acidulation, that was calculated from the ratio of A_L values for PR and PAPR in each soil indicated that partial acidulation increased the effectiveness of the natural PRs in all soils under study.This study showed that the use of³²P isotope dilution techniques allows an accurate measurement of the P availability from natural and modified PR products to crops. Another advantage is that quantitative comparison of the P sources under study, PRs and PAPRs in this case, can be made even in soils where there is no response to the applied P sources.     

基于移位原理的顺序控制器研究

本文根据PLC顺序控制程序的设计思路,阐述了用常用集成数码移位寄存器、电力电子开关电路和少量外围电子元件构成移位控制器的原理,根据此设计思路制作的移位控制器经过在实验室环境下运行,证明了设计方案的可行性。