ANALYTICAL SOLUTIONS FOR PEELING USING BEAM-ON-FOUNDATION MODEL AND COHESIVE ZONE

When fibrillation occurs during peeling, the normal stress in the adhesive may gradually reduce to zero at the peel front. The shear stress also reduces to zero. Classical beam-spring (or beam-on-elastic-foundation) models do not yield solutions that have these properties. With the use of a beam-on-foundation model combined with a cohesive zone in the neighborhood of the peel front, these properties can be satisfied. In order to obtain analytical solutions, peel tests are considered in which the backing has a small slope and is linearly elastic in the adhered region, and the traction law is assumed to be piecewise linear. Cases are considered with only normal stresses in the adhesive (mode I), only shear stresses (mode II), and both stresses coupled (mixed-mode behavior). Analytical solutions are obtained for displacements of the backing, forces in the backing, and stresses between the adhesive and the backing.     

Micro-computed tomography scanning approaches to quantify,parameterize and visualize bioturbation activity in clogged streambeds: A proof of concept

Fine particle clogging and faunal bioturbation are two key processes co-occurring in the hyporheic zone that potentially affect hyporheic exchange through modifications in the sediment structure of streambeds. Clogging results from excessive fine sediment infiltration and deposition in rivers, and it is known to decrease matrix porosity and potentially reduce permeability. Faunal bioturbation activity may compensate for the negative effect of clogging by reworking the sediment, increasing porosity, and preventing further infiltration of fines. Although both processes of clogging and bioturbation have received significant attention in the literature separately, their combined effects on streambed sediment structure are not well understood, mostly due to the lack of a standard methodology for their assessment. Here, we illustrate a novel methodology using X-ray computed tomography (CT), as proof of concept, to investigate how, together, clogging and bioturbation affect streambed porosity in a controlled flow-through flume. By visualising gallery formations of an upward conveyor macroinvertebrate; Lumbriculus variegatus as a model species, we quantified bioturbation activity in a clogged streambed, focusing on orientation, depth, and volume at downwelling and upwelling areas of the flume. Gallery creation increased the porosity of the streambed sediment, suggesting a potential improvement in permeability and a possible offset of clogging effects. We illustrate the promising use of X-ray CT as a tool to assess bioturbation in clogged streambeds, and the potential role of bioturbation activity supporting hyporheic exchange processes in streambeds, warranting further studies to understand the extent of bioturbation impacts in natural systems.     

高速公路施工区车辆强制换道耗时生存模型

为研究高速公路施工区车辆强制换道行为及其影响因素,采用生存分析中的半参数分析方法建立强制换道耗时的乘法风险率模型.通过无人机拍摄采集高速公路施工区的车辆换道耗时及其影响因素数据,最终确立换道耗时Cox比例风险模型,对换道耗时数据进行Cox回归建模分析.结果表明:近77%的换道车辆在10 s内完成换道;小型车和中型车经养护施工区的换道耗时未发现显著性差别;对于相同的换道耗时,平峰期的累积生存率明显低于高峰期和过渡时期,而高峰期的累积生存率最高.建立的强制换道耗时生存模型可有效的定量分析车型和交通时段对高速公路施工区车辆换道行为的影响,可为高速公路施工区交通管理控制及车辆换道行为建模及仿真奠定一定的理论基础.     

高密度电法与AMT在断裂构造调查中的综合应用

将音频大地电磁测量(AMT)和常规高密度电法相结合,综合利用两种方法的优点查找隐伏断裂构造具有较强的实用性。本文以龙门山断裂带隐伏断层调查为实例,首先介绍了工作区域的地电特征(判断是否具备开展电法工作的前提条件)、两种方法的工作原理及各自的数据处理流程,然后将同一测线上两种方法的测量成果加以对比,从而阐明两种方法各自的优缺点:AMT法测量深度大,但分辨率较低,高密度电法测量深度较浅,但分辨率高;AMT法易受外界电磁场干扰,而高密度电法易受水系、农田等低阻带影响。综上所述,二者在成果及适用范围上具有较高的互补性,在实际工作中适时地将两种方法结合起来,可以达到很好的效果。     

Rockburst mechanism in soft coal seam within deep coal mines

A number of rockburst accidents occurring in soft coal seams have shown that the rockburst mechanism involved in soft coal seams is significantly different from that involved in hard coal seams. Therefore, the method used to evaluate rockburst in hard coal seams is not applicable to soft coal seams. This paper established an energy integral model for the rockburst-inducing area and a friction work calculation model for the plastic area. If the remaining energy after the coal seam is broken in the rockburstinducing area is greater than the friction work required for the coal to burst out, then a rockburst accident will occur. Mechanisms of ‘‘quaking without bursting" and ‘‘quaking and bursting" are clarified for soft coal seams and corresponding control measures are proposed as the optimization of roadway layouts and use of ‘‘three strong systems"(strong de-stressing, strong supporting, and strong monitoring).     

禁飞区无人机预警算法研究

针对大量在空中无秩序飞行的无人机有可能会闯入飞机场等禁飞区的情况,为了避免发生空中交通安全事故,提出了一种无人机禁飞区预警算法。首先,该算法经过坐标变换将描述无人机位置点的GPS坐标转换成对应的平面坐标;接着,采用改进的最小二乘曲线拟合算法预测出无人机的飞行轨迹;然后,通过计算预测的飞行轨迹曲线在当前点的切线是否会与描述禁飞区的电子围栏相交,来判断无人机是否会进入禁飞区。同时,所有的无人机都会安装上飞行数据记录模块,来实时地为该算法提供无人机的飞行状态信息。最后,通过MATLAB仿真实验验证了该预警算法的可行性和有效性,表明该算法可以对禁飞区周围的无人机进行预警。     

口孜东矿11-2煤岩巷顶板离层稳定性分析

淮南矿区口孜东矿11－2煤埋置深,顶板地质条件复杂,根据已有研究结果将多点位移计实测的顶板总离层分离为层间离层和塑性变形。比较分离后层间离层、塑性变形值与其临界值,得出了该煤层岩巷顶板失稳特征,并分析了顶板岩层组成变化对其产生的影响,可为顶板合理支护提供依据。     

屋盖钢结构场馆施工方案设计

通过对屋盖钢结构场馆施工过程分析,并借助计算程序MIDAS/GEN进行验算分析,解决施工过程中的难点,可供类似的工程参考。     

巨厚砂岩顶板“三带”范围的数值模拟与界定

为定量划分采空区上覆巨厚砂岩顶板的"三带"范围,根据数值模拟的应力与位移结果,提出"三带"的界定准则:将上覆岩层中主应力都为拉应力的区域定为冒落带;将只有一个主应力为拉应力的岩层高度定为裂隙带的上限。采用FLAC3D软件对开采过程中的顶板运动规律进行了数值模拟,模拟结果与实际观测结果一致。表明此界定准则可为地质条件相似矿区的顶板"三带"分布提供借鉴。     

高层建筑地下室的后浇带和墙体施工缝构造措施研究

以吉林省延吉市某小区高层建筑框架结构工程为实例,对地下室后浇带和墙体水平施工缝的施工提出了新的构造措施:后浇带两侧采用由钢板网和钢筋骨架组成的模板,并且在其之间设置钢筋作为水平支撑,同时用钢板止水带止水的方法;水平施工缝采用钢板止水带止水、开口箍筋定位的方法.工程实践表明,施工质量符合现行规范验收标准,可为类似工程提供借鉴.