考虑次内力的桁架结构有限元分析

用有限元软件ANSYS对带式输送机栈桥的桁架结构进行了计算，结合实例着重探讨了考虑次内力时的桁架结构有限元分析在建模过程中需要解决的问题。     

LOW-CYCLE FATIGUE UNDER NON-PROPORTIONAL LOADING

A series of strain-controlled, low-cycle fatigue experiments have been conducted on 42CrMo steel under various loading paths including circular, square, cruciform, and rectangular paths. Present experiments have shown that there is additional hardening under non-proportional cyclic loading. Non-proportional cyclic additional hardening also results in a shorter life for multiaxial low cycle fatigue. A non-proportionality measure of strain path based on both a physical basis and macromechanical phenomena is proposed. The loading path effect on additional hardening is also described well. Low-cycle fatigue damage accumulation and the evolution process under non-proportional loading is analysed via the Continuum Damage Mechanics Model of Chaboche. A non-proportinality measure is introduced in the damage evolution equation and a modified Coffin-Manson type formula is derived. A novel fatigue life prediction approach based on the critical-plane concept of Brown and Miller is proposed.     

柔性制造系统的负荷分配及路径规划方法

柔性是柔性制造系统（ＦＭＳ）的一个基本优点，但这一基本优点却往往被人们忽视，许多现在运行的ＦＭＳ不是缺乏柔性，就是没能充分利用可获得的柔性来提高生产效率。柔性制造系统的负荷分配和路径规划问题正是这种柔性的一个主要方面，然而，路规划决策却往往被。其中一个主要原因人们仍不能从传统的生产管理概念中解放出来。本文在明确概念区分的基础上，提出了一种柔性制造系统的负荷分配和路径规划的线性规划模型，其主要特点是     

碳化硅加热元件的电性能和使用

本文介绍碳化硅加热元件的电特性、表面负荷以及工作气氛对它的影响，并对它设计和使用要点举例予以说明。     

超高吨位灌注桩静载试验中的预应力混凝土反力装置

在复兴大桥超高吨位灌注桩的静载试验,预应力混凝土反力装置替代了传统的钢梁反力系统。这套装置主要包括预应力锚桩、预应力承台与预应力反力梁。试验结果表明,直接获得超高吨位大直径嵌岩桩的极限承载力相当不易,而对这类问题预应力混凝土反力装置是值得考虑的。     

武钢含铁化合物二次资源综合利用的有效途径

在分析武钢含铁化合物二资资源的种类、数量和理化特性的基础上,提出了这部分资源的产品开发方向,并根据这些开发产品国内外市场的分析,指出这种开发将可能取得可观的经济效益。简介了这类开发的工艺和设备。     

Diurnal and environmental characterization of solar photovoltaic panels using a PC-AT add on plug in card

This article describes the development of an instrumentation system for characterizing photovoltaic panels. It uses an add on card (which contains DAC, ADC and digital input/output ports) in conjunction with a PC-AT. The panels in a field are selected in succession through a set of relays actuated by the digital output port. The selected panel is loaded in discreet steps by a transistor loading circuit which is activated by the digital to analog convertor to trace the most significant portion of the I-V curve. The data shows that the power output is invariably lower than that specified by the manufacturer. The reasons for drop in output have been analyzed. It is shown that these effects can be represented by the curvature of I-V characteristic at the maximum power point (OP). The loss of power due to accumulation of dust and the increase in temperature of the panels can be significant.     

水轮机调速器与电网负荷频率控制

在现代电力系统中，水轮机调速器已成为水轮机控制系统的控制核心。文中叙述了水轮机调速器与电网负荷频率控制之间的关系，分析了调速器在电网一次调频、二次调频中的作用、静态特性和动态特性;通过建模、仿真及现场试验，提出了机组并联于大电网工况下的调速器PID参数整定范围和应有的机组功率控制模式。     

关于无限棒束间流动和传热特性的数值研究

应用非线性ｋε湍流模式，采用非正交曲线坐标系下求解三维ＮＳ方程的非交错网格有限体积方法，数值模拟了充分发展条件下，三角形排列无限棒束间通道内，不同的几何参数（Ｐ／Ｄ），雷诺数（Ｒｅ）下的流动和传热问题。给出了不同参数下的速度和温度分布以及湍流二次流动，分析了几何参数、雷诺数及二次流对棒束内流动和传热特性的影响，得到了不同参数下通道的摩擦系数和Ｎｕｓｅｌｔ数，并与经验关系式作了比较     

非牛顿流体在气液搅拌槽内强制流动传热特征研究

为了确定非牛顿流体气流搅拌流动传热特征，对气体有效分散区域（载点）提出了无因次准数关联式，并就两种不同叶轮搅拌的通气管外传热系数作了比较。