A new approach to the mechanism of chlorine evolution: Separate examination of the kinetic steps using ac impedance on a rotating thin ring electrode

In the absence of a bulk diffusion effect, it is shown for the first time that the impedance spectra for the chlorine evolution reaction on a rotating thin ring electrode comprise three consecutive semicircles in the capacitive half of the complex plane. The first (highest frequency) semicircle is due to the charge-transfer resistance for chloride discharge and the simultaneous chlorine adsorption coupled to the double-layer capacitance. The second semicircle (around 5 Hz) is due to the adsorption and desorption of a chlorine intermediate. The third (lowest frequency, around 0.5 Hz) semicircle is due to the relaxation of surface oxygen species. The impedance data allow the steps of the overall reaction to be examined individually. On a Pt surface the rate of chloride discharge and simultaneous chlorine adsorption (the admittance of the first semicircle) is first order with respect to chloride concentration and has a potential-dependence close to 58 mV/decade. The rate of the adsorption and desorption process (the admittance of the second semicircle) is second order with respect to chloride concentration, and has a potential dependence close to 30 mV/decade. The time constant for the adsorption/desorption processes is ca 20 ms, independent of electrode potential in the range studied. These features are consistent with a mechanism in which a faster discharge reaction (Cl⁻ Cl_ad + e) is followed by a slower surface combination reaction (2Cl_ad → Cl₂), but inconsistent with mechanisms in which ion + atom desorption is predominant, the initial chloride discharge is slow, or a unipositively charged chlorine species is involved.     

Pure perceptual-based sequence learning.

Learning a sequence of target locations when the sequence is uncorrelated with a sequence of responses and target location is not the response dimension (pure perceptual-based sequence learning) was examined. Using probabilistic sequences of target locations, the author shows that such learning can be implicit, is unaffected by distance between target locations, and is mostly limited to first-order transition probabilities. Moreover, the mechanism underlying learning affords processing of information at anticipated target locations and appears to be attention based. Implications for hypotheses of implicit sequence learning are discussed. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

SISAK快速化学分离装置的建立

SISAK(Short-lived Isotopes Studies by the AKUFVE technique)技术是目前使用最广泛的快速化学分离方法之一,主要应用在短寿命核素的分离和鉴别、超重元素的人工合成以及化学性质研究等方面的工作中.本文简单地叙述了SISAK技术的流程、原理和发展现状,介绍了自行建立的国内第一套基于SISAK技术的快速化学分离装置,并通过从裂变产物中分离短寿命核素这一实例验证了SISAK技术在快速化学分离中的优越性.     

弹性筛管防砂技术

弹性筛管防砂技术是根据稠油油藏高轮次吞吐和蒸汽驱井防砂生产需要而研制的筛管防砂新技术。进行了筛管结构优化、加厚过滤单元外罩设计、固定方式研究、弹性过滤材料筛选、防腐实验研究等。室内试验表明，筛管的过流能力在900cm^2／m以上、渗透率在100μm^2以上、筛管抗内、外压强度达到20MPa、防砂粒径在0.1mm以上、耐温350℃、pH值在3～12之间不被腐蚀。现场试验证明，该技术防砂和抗堵塞性能好，防砂有效期长，地层适应性强，施工简便，防砂生产效果明显，具有良好的应用前景。     

计及PMU的混合非线性状态估计新方法

提出一种将同步相量测量单元（PMU）的直接电压相量量测变换为间接支路电流量测，并与监控与数据采集（SCADA）量测量一起进行混合迭代的非线性状态估计方法。对构造等效电流修正量而带来的间接量测误差进行了详细和定量的分析，并对该混合估计算法的精度进行了定性分析和定量计算。理论分析和算例表明，该方法可以获得较高的估计精度，在收敛次数和滤波效果上也有所改进。     

井下气液分离及回注技术研究现状分析

气井产水量的不断增加对天然气生产构成严重威胁，其影响越来越受到人们的关注和重视。使用井下气液分离及回注技术，可以降低举升和处理费用，增加生产寿命，提高采收率，减少环境污染，简化地面分离设备，提高投资效益。针对井下分离及回注技术研究现状进行了分析，给出了并下气液分离及回注形式、适用条件和技术设计、应用方面的结论。     

火电机组运行优化系统的现状与展望

简单回顾了国内外在火电机组运行优化领域的研究历程，列举了目前国内外市场上针对火电机组的各种主流运行优化产品的功能特点和应用情况，分析了国外引进产品和国内自主研发产品在中国当前市场环境下各自的优势和劣势。介绍了当前运行优化系统在国内电站机组的应用现状，阐述了国内外运行优化系统在实际应用中存在的问题，并提出了相应的改进意见。对机组运行优化系统的未来发展进行了展望，指出机组运行优化系统将利用先进技术设备和信息平台，与电站管理紧密结合，在日益规范的市场中不断发展完善，为提高电站经济性发挥更大的作用。     

Phase separation studies in RIM polyurethanes catalyst and hard segment crystallinity effects

Polyurethanes were prepared from pure 4,4′-diphenylmethane diisocyanate (MDI), 1,4-butane diol (BDO) or 1,2-ethane diol (EDO) and α,ω-hydroxyl poly(propylene oxide) (PPO) by reaction injection moulding (RIM). Hard segment (MDI + BDO or EDO) level was 45–50 wt%. The PPO had about 20% ethylene oxide copolymerized in at the chain ends to provide 80% primary OH end groups. M_n was varied from 2000 to 4000. Dibutyl tin dilaurate catalyst and mould temperature were varied. Dynamic mechanical, wide-angle X-ray, differential scanning calorimeter, molecular weight and tensile elongation measurements were made on the RIM polyurethanes. At low reaction rates (low catalyst or temperature) highly crystalline, well phase separated but low molecular weight polymers were produced. At high catalyst or temperature levels more poorly phase separated but high molecular weight, tough polymers resulted. Higher M_n PPO gave better phase separation and EDO gave higher melting temperatures. Preventing hard segment crystallinity by substituting asymmetric MDI or glycols resulted in phase compatibility.     

Head-to-head polymers: 33. Bromination of cis-1,4-polybutadiene to head-to-head poly(vinyl bromide)

Cis-1,4-polybutadiene (PB) in a 0.5% solution of a solvent mixture of dichloromethane and 1,2-dibromoethane or tetrahydrofuran was quantitatively brominated with elemental bromine at 0°C under careful exclusion of oxygen to head-to-head poly(vinyl bromide). Partially brominated PB has a structure of random or block sequences of butadiene units in the polymer depending on the bromination solvent but shows no stereospecificity in the CHBrCHBr-dyads. Partially brominated PB with block structure showed a microphase-separated morphology over a wide range of composition. Microphase separation is less pronounced for the more random structure of butadiene units. I.r and ¹³C n.m.r. spectroscopy of the partially brominated PB was used to follow the progress of the bromination.     

1000m~3/h空分设备板翅式换热器带水冻堵故障处理

介绍 10 0 0m3 /h空分设备板翅式换热器循环水加杀菌剂产生泡沫 ,引起空冷塔雾沫夹带而严重带水冻堵的故障现象、原因及处理措施 ,并指出运行中的不足。