玻璃钢加砂管在软土地基中的应用

主要分析并指出了新型材料在软土地质环境中的应用,并提出了解决软土中存在问题的方法,保证了新型材料在不同的条件正常施工,从而保证了管网的安全运行。     

Buck电路的一种软开关实现方法

提出了一种Buck电路软开关实现方法,即同步整流加上电感电流反向。根据两个开关管实现软开关的条件不同,提出了强管和弱管的概念,给出了满足软开关条件的设计方法。通过一个48V输入,19V/5A输出,开关频率为200kHz的同步Buck变换器样机,验证了上述方法的正确性,其满载效率达到了96.1%。     

同步整流Flyback电路的一种软开关实现方法

提出了适用于同步整流Flyback电路的一种软开关实现方法,即通过减小变压器激磁电感感量,使流过激磁电感的电流反向,从而达到开关管的ZVS软开关条件。分析了该电路的工作原理,给出了满足软开关条件的参数设计方法。最后设计了一个48V输入、5V/5A输出的电路模型来验证此方案的有效性。     

一种并行的软判决引导常数模盲均衡算法

介绍了一种常数模与软判决引导结合的盲均衡算法CMA SDD。该算法克服了CMA收敛速度慢、稳态误差大的缺点,同时可以纠正相位偏转。仿真表明,在高信噪比(SNR)条件下,两种算法的稳态均方误差相近,而CMA SDD算法的收敛速度更快;在低信噪比条件下,CMA SDD算法可以获得更快的收敛速度和更低的稳态均方误差。     

Spontaneous Formation of Ordered Lateral Patterns in Polymer Thin‐Film Structures

The understanding of the lateral morphology stability of thin polymer devices is of fundamental importance. In this work, the lateral morphology in a model system consisting of thin polymer films capped with thin metal layers on a Si substrate is investigated. When the model system is heated above a critical temperature, a characteristic surface topographic structure is observed that has a well‐defined periodicity but random orientation. It is shown that the minimum temperature, T_min, required for the surface pattern to be observed decreases with increasing polymer‐film thickness. Increasing either the metal‐ or polymer‐layer thickness increases the characteristic wavelength of the topography. It is believed that the dominating driving force for the surface corrugated‐pattern formation is the thermal‐expansion‐coefficient mismatch of the capping layer and the substrate. A theoretical model based on local bending of a thin, stiff surface film on a thin, elastic medium is used to provide a quantitative analysis of the surface morphology. The calculated minimum temperature required for the surface morphology and the periodicity of the surface patterns to form are in strong agreement with the experimental results. By contrast, systems with prefabricated topographic patterns within any of the three layers (polymer, metal, substrate) produce highly anisotropic surface topographies aligned perpendicular to the prefabricated topographic structure. It is also found that, in a model system with pre‐patterned polymer films, a much higher critical temperature is required for the surface morphology to be observed. The changes in apparent stability and morphological orientation in the pre‐patterned systems can be understood as a result of the anisotropic release of the lateral surface stress during the heat treatment.     

双基区大功率快恢复二极管的研究

提出了在采用VB=94ρ0n.7数学模型设计双基区p+pinn+结构快速软恢复FRD大功率二极管结构参数中引入η=Wi/Xm=0.25数学模型的方法。采用Si片扩铂和电子辐照共同控制基区少子寿命及分布,并利用该设计方法对ZKR1 000 A/2 600 V结构参数进行了优化设计。对设计参数进行了实验验证,结果表明,器件参数满足设计指标,达到国外同类产品水平。说明该设计方法及各种参数的选取是正确的,寿命控制技术是有效的。为p+pinn+结构二极管设计与制造提供了一种具有重要的指导意义和参考价值的新方法。     

软对数周期天线的结构设计

软对数周期天线所使用的软索具有弯曲悬垂变形的特点,对于大尺寸天线可能导致集合线严重弯曲变形。通过对软索变形的理论分析,在每根振子末端点与软索连接点间增加一段合适长度的非金属振子补偿尾线,就可以克服软索悬垂的不利条件。有效地利用其特点,使天线集合线呈水平状态,振子呈垂直状态,实现天线的保形,从而满足电气要求。在材料的选择方面,特制电缆、特制软线和迪尼玛绳都非常适合工程的使用。     

OFDM系统的差分软解调技术

文中介绍了基于DAPSK调制的OFDM系统，并用一种次最佳的软解调算法替代了复杂的、基于最大似然估计的最佳算法。仿真结果表明，该算法与OFDM系统可以很好的结合在一起达到复杂度和性能的折中。     

DLP大屏幕在县市级电视台新闻演播室的应用

简单介绍慈溪广播电视台在新闻演播室中DLP大屏幕系统的应用与实践,结合县市级广播电视台新闻演播室的特点,对慈溪电视台在新闻演播室中DLP大屏幕系统为电视墙背景的实际应用情况进行了阐述.实践表明,DLP大屏幕系统以强大的信号处理能力和周边设备的有机容入,极大地提高了演播室直播和录制的灵活性.