一种外置式视频同步信号发生器的设计

对随机视频信号的特点进行了研究，提出了采用谱分析提取随机视频信号的同步频率的方法，根据数据传输的要求设计了基于USB接口的外置式视频同步信号发生器并给出了系统的硬件框图和软件流程。系统具有自动分析随机视频信息隐含的同步信号频率，精确产生同步脉冲信号的特点，满足随机视频信号采集和稳定显示的同步要求。同步精度达到300帧内图像漂移小于1个像素。利用该视频同步信号发生器控制非标准图像采集卡实现了计算机辐射的随机视频信号的采集和稳定显示。     

基于聚类算法实现信号盲分类

本文解决了信号处理、工业控制等领域存在的非平稳信号盲分类问题。在聚类中广泛应用的K-Means算法及其它基于中心的聚类算法有两个共同的缺陷-需要预先确定类数目且随机初始化中心引起性能不稳定。本文提出的算法较好地解决了这两个问题，提高了算法稳定性，实现了非平稳信号盲分类。提取非平稳信号的小波系数作为聚类的样本空间，分析聚类结果的统计偏差以估计类的数目，采用调和均值准则进行分类。最后给出的仿真结果表明本文提出的方法较传统的K-Means算法明显降低分类错误率。     

桐柏抽水蓄能电站斜井开挖技术

桐柏抽水蓄能电站斜井扩挖在总结以往类似工程施工经验的基础上，对提升系统、信号控制系统及扩挖钻爆等工艺进行了优化，开创了斜井施工的新局面。为我国抽水蓄能电站大洞径、长斜井开挖积累了宝贵的经验。     

Integrated Smart Sensor Calibration

In many applications electronic sensors are used toimprove performance and reliability of measurement systems. Suchsensors should provide a correct transfer from the physical signalto be measured to the electrical output signal. One importantstep to achieve this, is to calibrate each sensor by applyingdifferent reference input signals and adjusting the sensor transferaccordingly. Besides expensive reference equipment the calibrationprocess takes much time and attention per individual sensor,which means a considerable increase in sensor production costs.By including at the sensor or sensor interface chip a programmablecalibration facility the calibration of such smart sensors caneasily be automated and can be executed for a batch of sensorsat a time, thus minimizing the calibration time and costs. Thispaper presents a calibration method and options for integrationin the smart sensor concept, in hardware as well as in software.An advantage of the proposed method is that it does not needa large matrix of calibration data, which needs to be storedin a look-up table or converted into a correction formula, butinstead it uses a step-by-step approach to correct the sensortransfer at each calibration measurement until the error is sufficientlysmall.     

A new FMS architecture based upon networked DSP servo technology

This paper presents a critical evaluation of existing FMS architectures and the academic and industrial design and development strategies used during their formulation. The paper seeks to address the need for, and value of, existing architectures within the industrial arena. More importantly however, this paper puts forward a new two-tier distributed control architecture for FMS based upon new (real-time) networkable DSP servo control methodologies developed by one of the authors for Softronics in Australia. The ramifications of these methodologies are substantial, not only in terms of FMS control, but in the overall simplification of such systems and the development of flexible fixturing devices over the coming decade. This paper also postulates on how new FMS architectures can be developed from such technologies and details why such architectures could be more appropriate to industry needs than those that are currently in existence.     

一种适用于ATM的语音处理方案

以ＡＴＭ实现分组话音通信，需要解决两个基本问题：传输时延和分组丢失。针对这两个基本问题，本文着重讨论了ＡＴＭ分组话音通信中３２ｋｂ／ｓＡＤＰＣＭ话音分组丢失的重建技术－－于模式匹配的波形替代技术和静默重建技术，分别用以补偿由于网络阻塞造成的分组话音信息丢失而产生的失真和改善重建话音的自然性。     

无线电引信多普勒信号增速器的研究

论述了无线电引信多普勒信号增速器的实现原理及意义，介绍了采用ＴＭＳ３２０Ｃ３０作为ＣＰＵ、多片大容量静态ＲＡＭ芯片构成海量存储体的信号增速器硬件结构和软件设计，并提出了今后的研究方向。     

Tracking Control and Synchronization for Two-Dimension Discrete Chaotic Systems

1　ＩｎｔｒｏｄｕｃｔｉｏｎＳｉｎｃｅ 1 990 ,ｃｈａｏｔｉｃｓｙｎｃｈｒｏｎｉｚａｔｉｏｎ[1～ 4] ａｎｄｃｈａｏｔｉｃｃｏｎｔｒｏｌｌｉｎｇ[5～6] ｈａｖｅｒｅｃｅｉｖｅｄａｇｒｅａｔｄｅａｌｏｆａｔｔｅｎｔｉｏｎ[7～1 1 ] ,ａｎｄｃｈａｏｔｉｃｓｙｎｃｈｒｏｎｉｚａｔｉｏｎｉｓａｐｈｅｎｏｍｅｎｏｎｏｆｉｎｔｅｒｅｓｔｉｎｆｉｅｌｄｓｆｒｏｍｅｌｅｃｔｒｏｎｉｃｓｔｏｃｏｍｍｕｎｉｃａｔｉｏｎ[1 2 ] ,ａｎｄｆｒｏｍｂｉｏｐｈｙｓｉｃｓｔｏｎｅｕｒｏ ｓｃｉｅｎｃｅ[1 3] .Ｉｆｃｈａｏｔｉｃｓｙｎｃ…     

神经网络余／十转换的数学原理

本文提出了孙子定理的微分方程求解法，讨论了系数为求余算子的非线性微分方程的稳定平衡点和最佳解的误差。本文构造的非线性微分方程可以唯一地收敛于孙子定理的解，其误差可任意小。该微分方程可用人工神经网络实时计算，实现余／十转换。计算机模拟结果证实了本文理论的正确性。     

f—x域内提高地震资料的信噪比

在 f-x 域,地震记录可以表示成有限个调频调幅正弦波的叠合,叠合的结果是一个连续且光滑的函数。我们可以用一个简单的 n 次多项式去逼近这个函数。本文提出了一种在 f-x 域用最小平方拟合原理消除随机噪声的新方法,并证明了在噪声为自噪以及空间采样足够密的条件下,拟合结果与噪声无关,即 f-x 域最小平方拟合处理可以有效地消除记录上的随机白噪,而对有效信号的破坏甚微。由于理论上允许振幅值及同相轴形态在空间上发生变化,因而该方法不具有混波作用,是高分辨率处理的理想工具。