硬脆材料专用ELID磨削液的研制

本文在已有新型通用ELID磨削液(HDMY-20型)的基础上，根据硬脆材料的磨削特点和ELID磨削过程中磨削液的电解修锐生膜缓蚀作用、结合通用ELID磨削液的研制经验．通过增添表面活性剂、稳定剂、防锈剂、油性极压剂和调整无机盐等成分的比例关系．优化出适合硬脆材料ELID磨削最佳状态的专用ELID磨削液。应用此磨削液磨削硬质合金表面粗糙度可达Ra0．007μm比通用型磨削液磨削的硬质合金Ra值降低了0．005μm。     

脆硬材料加工机理的研究

为了了解脆硬材料的加工情况，本文采用扫描电镜和高速摄影机对典型的脆硬材料，玻璃的磨削过程，静态，动态地进行了细致的观察和分析，提出了脆理材料的磨削模型，该模型全面地反映出整个加工过程中所发生的现象，对脆硬材料的加工有指导意义。     

高速重负荷磨钢坯砂轮的研制

研制的80m/S高速重负荷磨钢坯砂轮具有强度高,安全可靠,磨削效果好等特点。其磨削效率和磨削比分别为60m/s中速中负荷砂轮的2倍和7倍以上,大大提高了钢坯修磨的质量和产量,并能减轻工人劳动强度,改善劳动条件和环境污染,有利于钢屑回收。     

Progress in flotation de-silica

1　INTRODUCTIONBayer sprocessisatypicalmethodtoproducea luminumoxidefrombauxite .Forthediasporic baux ite ,theBayer sprocesscaneconomicallyproducealu minumoxideonlywhenthemassratioofAl2 O3toSiO2 >10 .However ,inChina ,thealuminumoxidewasmainlyproducedbyusing“sinteringprocess”or“in parallelBayer sinteringcombination process”technologiesbecausethediasporic bauxiteischarac terizedbyhighcontentofaluminumoxideandsilicabutlowAl2 O3/SiO2 (average 5 6 ) .Thesetwotech nologieshavetheproble…     

单级单开关不连续导电模式功率因数校正电路新方案

分析了几种单级单开关不连续导电、带输出电压隔离的功率因数校正电路，分别讨论了其优缺点，并提出了一种新的功率因数校正电路。     

45SiMnCrMo铸钢磨球强韧化的研究

利用Formastor-Digital全自动相变测量仪测定了ZG45SiMnCrMo钢的临界点,研究了该钢的余热淬火温度、回火温度对强韧性的影响和淬硬层分布.结果表明,45SiMnCrMo铸钢采用900℃淬火,300℃回火,强韧性最佳.     

EFFECT OF FINE GRINDING ACTIVATION ON LEACHING BEHAVIOUR OF SCHEELITE CONCENTRATE

The influence of mechanical activation on the leaching behaviour of scheelite was studied bymeans of fine grinding in an attritor and subsequently HCl leaching in presence of PO_4~(3-).Results showed that after fine grinding in the attritor,the reaction rate of scheelitewith HCl-Na_3PO_4 solution was remarkably increased,the extraction of W increased fromabout 8 to 99%.The IR spectra and X-ray diffraction analysis indicated that in addition toan enlargement of surface area the fine grinding action had made also changes of fine struc-ture and reactivity of solid surface,hence the leaching process of scheelite can be carried outunder mild leaching conditions.     

金属型铸造高铬白口铸铁磨球的复合变质处理研究

研究了复合变质处理对金属型铸造的高铬格白口铸铁磨球组织及性能的影响。结果表明，采用ＲＥ、Ｂ、Ｖ、Ｔｉ元素复合变质处理，可有效细化磨球结晶组织，改善碳化物的形态与分布，并显著提高冲击韧性和耐磨性能。     

ADSORPTION MECHANISMS OF HS-IONS ON SULPHIDE MINERAL SURFACES RELATED TO Na_2S-INDUCED FLOTATION

The adsorption mechanisms of HS~- ions existing in air-saturated alkaline solutions on sulphide minerals (including pyrite, arsenopyrite, chalcopyrite and galena) were investigated. The measurement of adsorption density, solvent extraction-chemical analysis of neutral sulphur at the surfaces, measurements of pulp potential and voltammogram, and flotation tests were done. Both the electrochemical and non-electrochemi cal adsorption models of HS~- ions were established. The former was observed and resulted in the formation of neutral sulphur (S°)when the pyrite and arsenopyrite were chosen, and hence renders the surfaces hy drophobic and induced the two minerals flotation. It is called Na_2S-induced flotation. On the other hand, the latter took place and did not produce S° when the chalcopyrite and galena were selected, and hence de presses the collectorless flotation of the two minerals. The adsorptions of HS~- ions were mainly influenced by potentials, pH and the electron structures of the mineral surfaces.     

PRESSURE DISTRIBUTION IN THE AIR-SPARGED HYDROCYCLONE

ＰＲＥＳＳＵＲＥＤＩＳＴＲＩＢＵＴＩＯＮＩＮＴＨＥＡＩＲ－ＳＰＡＲＧＥＤＨＹＤＲＯＣＹＣＬＯＮＥ￥Ｃｈｕ，Ｌｉａｎｇｙｉｎ；ＬｕｏＱｉａｎ（ＭｉｎｅｒａｌＥｎｇｉｎｅｅｒｉｎｇＤｅｐａｒｔｍｅｎｔ，ＮｏｒｔｈｅａｓｔｅｒｎＵｎｉｖｅｒｓｉｔｙ，Ｓｈｅ...