基于兴趣和信任评价的P2P语义社区模型

针对大规模网络中P2P信息共享面临的资源定位问题和“搭便车”现象,在考虑节点语义相似度、信任度和活跃强度的基础上,提出一种语义社区构建方法,提高P2P资源组织的结构性和定位准确性。建立基于信任评价的语义社区动态调整机制,以减少或消除“搭便车”的节点。     

金属表面环氧漆漆膜拉伸剪切强度的测定

借鉴国标胶粘剂拉伸剪切强度测定方法测定了阳极、阴极环氧电泳漆与环氧涂料在底材为铝合金及钢材上漆膜的拉伸剪切强度，在铝件及钢铁件表面上阳极电泳漆漆膜的拉伸剪切强度为11．60MPa及17．91MPa，阴极电泳漆漆膜分别为17．60MPa及23．20MPa，喷涂环氧漆膜为7．93MPa 及13．40MPa，并介绍了测定试验中的实际操作经验和技术细节。     

低密度、高强度DG型高变催化剂的研制

本文叙述了一种适合大型氨厂使用的、堆密度低到1.25 kg·L^-1、还原态侧压强度高达350 N·cm^-1以上、本体含硫＜500 ppm(wt)、低温活性好的高温变换催化剂的研制开发过程 还介绍了催化剂制备工艺特点和工业试用效果。     

Effect of display location on control-display stereotype strength for translational and rotational controls with linear displays

Experiments were designed to investigate the effects of control type and display location, relative to the operator, on the strength of control/display stereotypes. The Worringham and Beringer Visual Field principle and an extension of this principle for rotary controls (Hoffmann E.R., and Chan A.H.S. 2013). “The Worringham and Beringer ‘Visual Field’ Principle for Rotary Controls. Ergonomics.” 56 (10): 1620–1624) indicated that, for a number of different control types (rotary and lever) on different planes, there should be no significant effect of the display location relative to the seated operator. Past data were surveyed and stereotype strengths listed. Experiments filled gaps where data are not available. Six different control types and seven display locations were used, as in the Frame of Reference Transformation Tool (FORT) model of Wickens et al. (Wickens, C.D., Keller, J.W., and Small, R.L. (2010). “Left. No, Right! Development of the Frame of Reference Transformation Tool (FORT).” Proceedings of the Human Factors and Ergonomics Society 54th Annual Meeting September 2010, 54: 1022–1026). Control/display arrangements with high stereotype strengths were evaluated yielding data for designers of complex control/display arrangements where the control and display are in different planes and for where the operator is moving. It was found possible to predict display/control arrangements with high stereotype strength, based on past data.

Practitioner Summary: Controls and displays in complex arrangements need to have high compatibility. These experiments provide arrangements for six different controls (rotary and translational) and seven different display locations relative to the operator.     

FPGA的动力电池检测系统研究

为提高动力电池使用效率,提出了一种基于FPGA的动力电池检测系统的设计方案.采用AD转换芯片实现对电池电压、电流的采集,数字温度传感器对温度进行采集,再通过软件实现对数据的处理和实时显示.系统运行稳定,数据处理能力强,集成度高,易于扩展.     

单向坡斜拉桥体系转换分析与控制措施

利用ANSYS程序的APDL建立了彭溪河特大桥的平面有限元模型,分析单向坡在体系转换中对结构内力和位移的影响,认为单向纵坡斜拉桥内力分布呈非对称性,因此在体系转换时主梁易受到不平衡力的冲击.在此基础上,提出了减小单向纵坡对其体系转换影响的控制措施.     

Residual strength prediction of multiple cracked stiffened panels

Prediction of the coalescence of adjacent cracks is critical for residual strength estimation of structures under multiple site damage conditions. A methodology successfully developed for the case of crack link‐up prediction of un‐stiffened plates, is extended for the case of typical cracked stiffened aircraft panels. The proposed link‐up criterion is based on the change in the magnitudes of elastic and plastic strain energies of the stiffened panel, before and after the cracks coalesce. The strain energy magnitudes of interest are calculated using non‐linear elastic–plastic finite‐element analysis. For the application and verification of the method, experimental results from the open literature are used. Residual strength values calculated by the proposed methodology are in good agreement with the experimental results. The present criterion provides superior results when compared to the existing and commonly applied link‐up criteria.     

洗衣机旋转系统驱动特性的研究

对电动洗衣机负载的稳态转矩转速特性进行实验研究,理论分析了洗衣机旋转系统的动力学特性,因此提出了对变频洗衣机的控制方式和电动机设计的有关考虑,并进行了实验。