金属材料屈服强度的应变率效应和热激活理论

对４种金属材料进行了应变率为１０＾－４－１０＾３ｓ＾－１的拉伸试验，结果表明，屈服中度随应变率的升高分两阶段线性升高，提出了位错线热振动对加载频率的响应的热激活作用机理，依据该机理计算所得Ⅰ，Ⅱ区临界应变εｃ与实测值相符，并在此基础上将应变率对掘强度影响的机制图重新划分为：Ｉ区，富热激活区；Ⅱ区，贫热激活区。     

Effects of coating thickness and residual stresses on the bond strength of ASTM C633-79 thermal spray coating test specimens

Wire-arc-sprayed nickel-aluminum is widely used in the aircraft industry for dimensional restoration of worn parts and as a bond coat for thermal barrier coatings and other top coats. Some repair applications require thick coatings, which often result in lower bond strength. A mechanism being investigated to ex-plain this decrease in bond strength is the free edge effect, which includes both coating residual stresses and coating thickness. The layer-removal method was used to determine experimentally the residual stresses in wire-arc-sprayed nickel-aluminum coatings of different thicknesses. Bond strength evalu-ations were performed using an improved ASTM C 633-79 test specimen. Finite-element analysis and fracture mechanics were used to investigate the effects of coating thickness and residual stress state on coating bond strength.     

岸吊焊缝裂纹分析与改进措施研究

从材料的焊接性能、焊接结构、焊条、预热与焊后热处理、焊接工艺参数等角度对岸吊胎架焊缝裂纹进行了分析,提出了改进措施,取得了良好的效果。     

外缘内曲翻边毛坯尺寸的计算

通过对外缘内曲翻边应力应变状态的分析,导出了预测变形区的变形和对毛坯尺寸进行修正的解析式,经与有限元数值模拟和实验结果对比,证实该公式有较高的精度,可以用于确定毛坯尺寸。     

Experimental Study of Microstructure Evolution during Tempering of Quenched Steel and Its Application

LARGE-SIZED FORGINGS are usually intensivelyquenched to obtain the desired microstructuredistribution,high strength and hardness.Becauseresidual stresses are high in quenched large-sizedforgings,tempering processes follow quenchingprocesses to reduce the residual stress and obtain goodmechanical properties.Several differentmicrostructures are generated in quenched steelforgings,such as martensite,bainite and retainedaustenite.Modeling of microstructure evolution inquenched steel during …     

含B2O3渣系的热力学计算模型

根据炉渣结构的共存理论和相图，推导了ＣａＯＢ２Ｏ３和ＦｅＯＦｅ２Ｏ３Ｂ２Ｏ３渣系的热力学计算模型。结果表明：（１）理论计算的ＣａＯＢ２Ｏ３渣系的作用浓度ＮＣａＯ及ＮＢ２Ｏ３与实测的活度ａＣａＯ及ａＢ２Ｏ３一致；（２）理论计算的ＦｅＯＦｅ２Ｏ３Ｂ２Ｏ３渣系的氧化能力ＮＦｅｔＯ与实测的炉渣ＦｅｔＯ的活度值相符合。这说明本文提出的热力学计算模型是合理的。     

基于贝叶斯的服务通告改装经济性决策方法

改装类服务通告的经济性决策是航空维修企业工程人员的一项重要工作内容。设计了改装类服务通告经济性决策程序;通过服务通告对飞机运营的经济性影响分析构建了成本分解结构,并对不同的成本项目建立了成本评估模型;针对模型的成本影响参数MTBUR和MTBF的估计采用了贝叶斯方法以解决小样本问题;通过投资回收期方法获得评价指标以决定是否进行服务通告改装投资。最后通过实例对决策方法的应用进行说明。此方法能够为航空企业的维修改装决策提供有效的技术支持。     

Spatial and functional relationships between air conduits and blood capillaries in the pulmonary gas exchange tissue of adult and developing chickens

The documented data regarding the three-dimensional structure of the air capillaries (ACs), the ultimate sites of gas exchange in the avian lung is contradictory. Further, the mode of gas exchange, described as cross-current has not been clearly elucidated. We studied the temporal and spatial arrangement of the terminal air conduits of the chicken lung and their relationship with the blood capillaries (BCs) in embryos as well as the definitive architecture in adults. Several visualization techniques that included corrosion casting, light microscopy as well as scanning and transmission electron microscopy were used. Two to six infundibulae extend from each atrium and give rise to numerous ACs that spread centrifugally. Majority of the ACs are tubular structures that give off branches, which anastomose with their neighboring cognates. Some ACs have globular shapes and a few are blind-ending tapering tubes. During inauguration, the luminal aspects of the ACs are characterized by numerous microvillus-like microplicae, which are formed during the complex processes of cell attenuation and canalization of the ACs. The parabronchial exchange BCs, initially inaugurated as disorganized meshworks, are reoriented via pillar formation to lie predominantly orthogonal to the long axes of the ACs. The remodeling of the retiform meshworks by intussusceptive angiogenesis essentially accomplishes a cross-current system at the gas exchange interface in the adults, where BCs form ring-like patterns around the ACs, thus establishing a cross-current system. Our findings clarify the mode of gas exchange in the parabronchial mantle and illuminate the basis for the functional efficiency of the avian lung.     

灾害中生活类物资的供应分析——以汶川地震重灾区物资供应为例

救灾生活类物资在供应中面临着优化运输路线、降低运输成本、缩短运输时间3个难题。文章采用相关机会多目标规划模型,以汶川地震为例,总结并完善了自然灾害救助中的多物资的协作供应模式,为突发性重大灾害中多物资的协作供应的组织、实施、管理提供参考支持。     

高压切割喷嘴冲击磨损的数值分析

以复用矿井含煤颗粒的水对高压切割喷嘴的磨损物理问题为研究对象,采用计算流体力学理论进行数值计算,分析讨论了质量浓度为10、15、20、25、30、40 mg/L条件下速度、剪应力、磨损的分布以及变化关系。计算、分析结果表明:磨损主要发生在出口部位和锥体的后半部份,入口部份和锥体前半部份磨损较小;入口部位、锥体部位磨损量、剪应力随质量浓度增加变化较小;出口部位磨损量在质量浓度为10～20 mg/L减小较快,超过20 mg/L后变化不大;出口部位流体速度、磨损量、剪应力与质量浓度间存在对应关系。煤粒入口速度与混合物速度相同、锥体部位煤粒流体速度低于锥体部位混合物速度(平均值)约79.4%;煤粒出口部位速度随质量浓度的增大而呈现先增加后减小的趋势,速度最大值发生在浓度20 mg/L。