聚己二酸1,2-环己二醇酯的合成

采用正交实验方法,分别以钛酸四丁酯和对甲苯磺酸为催化剂,合成了聚己二酸1,2 环己二醇酯,对其合成工艺条件进行了研究,得出了最佳工艺条件。并以所得聚酯合成了具有透明度高、硬度大、耐磨、玻璃化温度高等优异性能的聚氨酯材料。     

TiB2的SHS合成过程理论分析

在ＴｉＢ２陶瓷材料的自蔓延高温合成（简称ＳＨＳ）过程中，通过改变原料的起始温度，稀释剂的含量和原始颗粒的尺寸等都可以调节合成过程的绝热温度，产物中熔融相的含量，以及燃烧波蔓延的速度，人而最终影响合成产物的结构和性质。本文对上述各种关系进行了理论计算和分析，其结果对实际合成与制备过程将有着重要的指导作用。     

Electron beam irradiation of ethylene‐propylene terpolymer: Evaluation of trimethylol propane trimethacrylate as a crosslink promoter

The effect of electron beam irradiation on ethylene‐propylene terpolymer (EPDM) was investigated. A 50‐part oil‐extended EPDM with high termonomer (ENB) content (iodine number of base polymer) 19, was selected for this study. An increase in irradiation dose from 0 to 200 kGy resulted in increased crosslinking, measured by an increase in gel contents and better swelling resistance. The effect of the multifunctional monomer trimethylol propane trimethacrylate (TMPTMA) as a crosslink promoter was studied using IR spectroscopy. The IR studies revealed enhanced peak absorbances at 1725, 1257, and 1023 cm^?1 as a result of the increased concentration of C = O and C‐O‐C groups and reduced absorbance at 1630 cm^?1 due decreased concentration of C = C groups with TMPTMA level in the irradiated samples. The presence of TMPTMA increased the level of crosslinking at a given irradiation dose, which was manifested by improvement in tensile properties. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 968–975, 2005     

莫达非尼的绿色化学合成

采用[bm im]BF4离子液体作为反应溶剂,以二苯甲硫醇为原料,经醚化、氨解、氧化得到新型提神醒脑药物莫达非尼。讨论了不同的氯乙酸酯和反应温度对醚化反应收率的影响,讨论了不同的二苯甲硫乙酸酯对氨解反应收率的影响,及离子液体的回收使用。研究表明,采用氯乙酸甲酯作为醚化试剂,反应时间4 h,反应温度100℃,二苯甲硫醇∶氯乙酸甲酯=1∶1.5(摩尔比),室温下氨解反应20 h,二苯甲硫乙酰胺收率76%;采用过氧化氢作为氧化试剂,反应时间3 h,反应温度60℃,过氧化氢∶二苯甲硫乙酰胺=1∶1(摩尔比),莫达非尼收率79%,反应总收率可达48%。     

New perfectly difunctional organolithium initiators for block copolymer synthesis: 2. Difunctional polymers of dienes and of their triblocks copolymers with styrene

New organodilithium initiators were prepared in a hydrocarbon solvent in the absence of any polar additive. Although these initiators are insoluble when they are synthesized, they may be easily purified and reacted with dienes to give perfectly telechelic polydienes having unimodal distributions and low dispersity. A good agreement between experimental and theoretical molecular weights was observed. The polymer microstructures were similar to those of polymers initiated by butyllithium in the same solvent. Triblock thermoplastic elastomers were also prepared, the characteristics of which are given. The mechanical properties of a S.B.S. sample support also the claim of a good initiating ability and difunctionality of these initiators.     

美国能源部的浆态床F－T合成技术

浆态床Ｆ－Ｔ合成技术是美国能源部Ｆ－Ｔ合成技术的主要开发项目。本文就浆态相Ｆ－Ｔ合成催化剂的开发、中试示范实验和浆态反应器的化工基础研究作一扼要的介绍。     

A method for the design of flexible distillation sequence

A simple method has been developed to optimally design a distillation sequence with a fixed degree of flexibility in feed composition and flowrate, and accounts for uncertainty in stage efficiency, K-value and beat transfer coefficient calculations. The method minimizes a weighted cost function and ensures both optimal and feasible operation in the range of flexibility/uncertainty by using an approach termed “practical feasibility”. The method was tested on a 4 column distillation sequence separating a 5 component light alkane feed mixture. Results are presented to illustrate the effect of uncertainty on sequence cost and column overdesign.     

利用煤层气发展山西合成油工业探讨

介绍了国外利用天然气生产油口的生产工艺，探讨了山西省利用丰富的煤层气资源发展合成油的可能性和优势，并提出了相应的发展建议。     

固体酸催化合成苯甲酸正丁酯

论述了利用对甲苯磺酸，磺化苯磷酸锆，六水三氯化铁，氧化亚锡，十二水合硫酸铁铵，一水硫酸氢钠，固体超强酸和杂多酸等各种固体催化剂催化合成苯甲酸正丁酯的方法。研究发现：各种催化剂的催化效果良好，酯收率达74％以上，有的甚至达97.8％。同时对各种催化剂的催化机理进行了初步探讨，对各种固体酸的催化效果也进行了比较。     

分子内敏化鎓盐的合成及光敏性研究

二芳基碘鎓盐和三芳基硫鎓盐是阳离子聚合的光引发剂和光敏产酸物,但他们在300nm以上的光吸收很低,限制了对紫外光的利用效率。为解决此问题,本文合成了一些新的碘鎓盐和硫鎓盐,并用凝胶时间方法考察了它们的光引发效率。实验结果表明,2-苯硫基甲基,2′,4′-二甲基二苯碘鎓盐和9-蒽丙基,二苯基硫鎓盐具有特别高的光引发效率,这归之于光照时这些鎓盐发生了分子内电荷转移反应,即发生了分子内敏化。9-蒽丙基二苯硫鎓盐分子中的蒽基(An)是电子给体也是敏化基团,光照时可发生如下反应: