确定厚壁圆筒初始屈服压力的一种实验方法

基于厚壁圆筒的弹性失效准则所确定的圆筒的初始屈服压力与材料的屈服极限的关系，设计了一种测定厚壁圆筒初始屈服压力的实验方法，并测得了一组实验数据。通过对该实验数据的分析得到了圆筒的初始屈服压力。该实验值与理论值误差较小，表明了该实验方法具有较好的可靠性。     

浅谈宝钢宽厚板工程磨辊间设计的有关问题

介绍宝钢宽厚板轧机工程概况及磨辊间主要特点，阐述了宽厚板轧机磨辊间设计中应注意的问题。     

"3-Section" Technology of Full-Dimension Mining in Flat Thick-Seam

To raise coal recovery ratio and solve the key problem of full-dimension mining, a new "3-section" technology of full-dimension mining is put forward in flat thick-seam according to the theory and mining practice. This technology is proved to be rational and feasible in rodway layout system of stagger arrangement.     

Reduction of defects and improvement in the performance of blue phosphor for thick‐dielectric electroluminescent displays using Color‐by‐Blue

Abstract— Defect‐free large‐area inorganic thick‐dielectric EL (TDEL) displays using Color by Blue (CBB) technology have been successfully developed. We have achieved the world's highest blue‐phosphor luminance of 900 cd/m² for a single‐pixel device by using CBB and by optimizing the e‐beam gun configuration and the flow rate of H₂S in the vacuum chamber. By analyzing the defects on panels with triple‐pattern phosphors and CBB panels, we also found that the number of defects on CBB panels can be drastically reduced compared with those on triple‐pattern panels. The defect‐free 17‐in. VGA CBB panels show better characteristics, a high peak luminance of 600 cd/m² and a high contrast ratio of 1000:1, compared with those of triple‐pattern panels.     

Applications of medium-voltage STEM for the 3-D study of organelles within very thick sections

Scanning transmission electron microscopy at 300 kV enables the visualization of nucleolar silver-stained structures within thick sections (3–8 μm) of Epon-embedded cells at high tilt angles (–50°; + 50°). Thick sections coated with gold particles were used to determine the best conditions for obtaining images with high contrast and good resolution. For a 6-μm-thick section the values of thinning and shrinkage under the beam are 35 to 10%, respectively. At the electron density used in these experiments (100e^—/Å₂/s) it is estimated that these modifications of the section stabilized in less than 10 min. The broadening of the beam through the section was measured and calculations indicated that the subsequent resolution reached 100 nm for objects localized near the lower side of 4-μm-thick sections with a spot-size of 5·6 nm. Comparing the same biological samples, viewed alternately in CTEM and STEM, demonstrated that images obtained in STEM have a better resolution and contrast for sections thicker than 3 μm. Therefore, the visualization of densely stained structures, observed through very thick sections in the STEM mode, will be very useful in the near future for microtomographic reconstruction of cellular organelles.     

优化换向器冷锻模冲头锥角的显式目标函数

应用金属塑性应力、应变原理和数值分析中最小二乘法推导出了优化冲头端部锥角的目标函数凹模的最大工作应力和材料利用率的具体表达式，建立了具有显式目标函数的具体数学模型，能更深入分析冲头形状对模具结构及成形工艺的影响。     

孔内深层超强夯法处理厚层人工回填土的应用研究

介绍了孔内深层超强夯法（SDDC）的基本原理,并将SDDC工法运用于处理某机场内厚层人工回填土地基,对无机固体废料进行了资源化回收利用。通过复合地基载荷试验、标准贯入试验和重型动力触探试验对SDDC施工质量进行检测,对SDDC桩体和桩间土的承载力效果进行评价。结果表明,经SDDC工法处理后的复合地基均匀性较好,承载力显著提高,达到工程使用要求。     

高浓度超稠油乳化废水预处理工艺与实践

超稠油在加工过程中产生大量高浓度乳化废水,常规炼油污水处理场难以处理并导致外排水严重超标.以某稠油加工企业高浓度超稠油乳化废水为研究对象,对其物理化学性质,沉降、破乳、絮凝条件进行了系统研究,并在大量试验的基础上开发出预处理工艺.相应装置建成后运行平稳高效,废水得到高效的处理与污油资源回收.     

不稳定岩层中平巷掘进的悬拱法

本文在总结先拱后墙平巷掘进经验的基础上，根据射 石力学理论和平巷掘进原理，提出了平巷掘进的悬拱法。实践证明，悬地是不稳定岩层中平巷掘进的有效施工方法。     

激光区熔Bi系超导复合带组织特征

在 Ag 基带上非平衡凝固熔敷超导厚膜,用激光区熔法制备组织致密、有明显织构取向、与基材结合牢固的柔性 Bi 系超导复合带材。研究了该超导材料的定向结晶特征、凝固表面和内层组织形态、相分布与组成及超导层同基材的结合。此法开辟了制备高 J_c 实用超导带材的新途径。