柔软热收缩材料的研制

总结了经共混和辐射交联制备柔软耐老化的热收缩材料的研制过程。测得了不同乙丙橡胶含量和不同辐照剂量下的共混物的力学性能和凝胶含量，确定了共混物辐射交联的合适剂量。此外，还测试了ＥＰＤＭ和ＰＥ共混物经辐照后的耐油性能。在此基础上，制得了手感柔软的热收缩管材。     

换热器管板厚度的快速计算

在化工生产中，换热器设备是应用最广泛的一种设备，且占主导地位。而在换热器设计过程中，管板厚度设计计算比较复杂。本文的特点是在满足GB151—1999《管壳式换热器》标准要求的前提下，介绍一种快速简便估算管板厚度的计算公式，从而达到快速确定管板厚度的目的。     

搅拌槽中垂直列管外壁的传热膜系数分布

在一内径为 12 0 0mm容积为 1.5m3 的搅拌槽中 ,使用CBY螺旋桨、 4 5°斜叶桨和六直叶涡轮桨 ,对牛顿流体采用量热法 ,研究了列管外壁的局部传热膜系数的分布情况。实验结果表明 ,对轴向流桨和径向流桨 ,列管外壁的局部传热膜系数有不同的分布 ;列管外壁各点的局部传热膜系数均与ε0 .197成正比。此外 ,文中还研究了桨叶离底距离、桨径等因素对列管外壁局部传热膜系数的影响。     

塑料管材用于干式地板供热、供冷的可行性研究

据塑料管材的力学性能，针对其应用于地板供热、供冷时应注意的问题，从塑料管材使用条件、管材的选择、管壁厚度的确定、地板结构、介质作用温度及供热、供冷运行方式等方面对塑料管材应用于供热、供冷的可行性进行了探讨，提出了一些相应措施和技术方案，并给出了实例。     

环氧化天然橡胶内胎气密性和实用性的研究

采用与ＩＲ内胎、ＮＲ内胎平行对比的方法研究了静态及装车使用条件下环氧化天然橡胶（ＥＮＲ）内胎的保压性，测试了三种橡胶内胎及胶料试样对空气的透过率。数据表明，ＥＮＲ内胎的气密性与ＩＲ内胎的气密性相近，远优于ＮＲ内胎的气密性。ＥＮＲ内胎使用性能良好，冬季在北纬４６°森林山区使用未发现不耐低温问题。３年５个月库存后外观完好，物理机械性能无明显变化     

高效节能换热器在氮肥工业中的应用

描述了新型折流杆换热器的强化传热和降低壳层压力降的原理 ,它与传统折流板换热器相比 ,传热效率高 ,材料及能耗小。介绍了这种新型换热器在合成氨变换工段和尿素装置中的应用情况及所起的节能降耗作用 ,指出该高效节能换热器在设计和生产中的关键技术。     

Flow regimes,hold–up and pressure drop for two phase flowin helical coils

Experimental results on flow pattern, hold–up and pressure drop are presented for cocurrent upward and downward air water flow in helical coils. A tube of 0.01 m internal diameter was used and the ratio of coil to tube diameter was varied from 11 to 156.5. Water flow rate was varied from 4.9 × 10-⁶ m³/s to 92 × 10-⁶ m³/s while the range of gas flow rate covered was 83 × 10-⁶ m³/s to 610 × 10-⁶ m³/s. A new mechanistic approach is proposed to correlate pressure drop data in coils. The proposed model retains the identity of each phase and separately accounts for the effects of curvature and tube inclination resulting from the torsion of the tube. This makes it possible to use a single model to predict pressure drop for both upward and downward two–phase flow in coiled tubes. Required correlations for hold–up, interfacial friction factor and friction factors for individual phases are provided.     

SYNTHESIS OF ACICULAR GOETHITE PARTICLES BY OXIDATION OF AQUEOUS FERROUS HYDROXIDE SUSPENSION IN A BUBBLE COLUMN WITH DRAFT TUBE

Acicular goethite particles were synthesized by oxidation of an alkaline suspension of ferrous hydroxide using a bubble column with draft tubes of different diameters at a constant temperature of 40°C. The oxidation rate increased with decreasing draft tube diameter. The mean size based on the major axis of acicular particle decreased with increasing oxidation rate and decreasing draft tube diameter. The major axis was found to grow preferentially compared with the minor axis. The mean size of major axis was correlated well to the modified reaction rate defined as a product of the reaction rate per unit volume of the reactor multiplied by the ratio of the column diameter to the draft tube diameter, irrespective of the draft tube diameter.     

On the examination of recycle on heat (and mass) transfer in concentric tubes

The effect of recycle on heat (and mass) transfer in concentric circular tubes has been investigated by finite difference methods. Theoretical results show that recycle can enhance the heat transfer rate for large Graetz numbers compared with that in an open tube (without an inner tube inserted and without recycle). Competition between a preheating effect and a residence-time effect can be used to explain the heat transfer behavior. The heat transfer rate can be further augmented, with nearly no increase in total pressure drop, by employing flow pattern B instead of flow pattern A.