改进的APRIORI算法在试卷系统数据挖掘中的应用

本文通过对数据挖掘技术的研究,采用关联规则法对学生答题数据进行分析,并在关联规则使用中采用改进型的Apriori算法进行运算,构建高频集,并对于高分学生和低分学生的试卷进行了加权处理,使得高频集中的试题在知识点和难度上的关联更加突出,便于在自动组卷时更科学地评价试卷.     

Bulk and Interphase Effects in Aged Structural Joints

Although structural adhesives are becoming widespread in numerous applications, one important limitation at present is the long term behaviour of bonded assemblies under conditions of high humidity, especially at elevated temperatures. This study presents a comparison between bulk properties of a structural epoxy resin and its behaviour in a torsional joint consisting of a hollowed-out cylinder bonded to a plate—both substrates being in stainless steel. Exposure to ca. 100% relative humidity at 70°C leads to modification of the bulk properties of the polymer, notably reduction of its elastic modulus. Although this may explain some differences in behaviour of the torsional joint, premature failure is attributed to weaknesses in the interphase zone.

Auger Electron Spectroscopy (AES) has been employed to investigate both unbonded steel surfaces and fracture zones. Although prolonged exposure to water leads to a more extensive degree of (apparently) adhesive failure at the interface polymer/metal, AES has shown the presence of non-negligible quantities of carbon, attributed to residual polymer. Failure would seem to occur, at least partly, in a weak interphase of the polymer, near, but not at, the interface.

Various possible causes are evoked. For dry failure, residual polymer may be due to the topography of the metal surface and/or local modification of the adhesive during cure. In the case of aged joints, in addition there are potential effects due to swelling and differential stresses, secondary bond failure and molecular chain scission within the polymer, all provoked by the presence of water.     

Available nitrogen in soils and its determination by the ‘Nmin-method’ and by electroultrafiltration (EUF)

Excess nitrogen fertilizer rates are an environmental hazard. To avoid excess rates, the level of available nitrogen in the soil must be known and considered for assessing the nitrogen fertilizer rate. In arable soils nitrate and exchangeable ammonium in the rooting depth of a crop are directly available to plant roots. These two nitrogen forms are recovered with the Nmin method and they are considered in assessing the nitrogen fertilizer rate for arable crops.Besides nitrate and ammonium recovered by the Nmin method from soil samples taken in early spring, a considerable amount of organic soil nitrogen may be mineralized during the growth period and contribute to crop nutrition. The nitrogen mineralization potential can be determined in incubation tests. The absolute quantities of mineralized nitrogen thus obtained, however, are much higher than the mineralization rates under field conditions. It is for this reason that incubation tests have not obtained a major importance for assessing nitrogen fertilizer rates.With the electro-ultrafiltration (EUF) method nitrate, ammonium, and a minor portion of organic soil nitrogen are extracted from a soil suspension. There is experimental evidence that this organic nitrogen (=Norg) is easily mineralizable. Based on field experiments with cereals and maize formulae were established by which the nitrogen fertilizer rate can be calculated. In these formulae nitrate, ammonium and organic nitrogen extracted by EUF are considered.Advantages and drawbacks of the Nmin method and EUF method are discussed.     

工业纯铝在模拟海水中的电化学腐蚀行为

为研究铝在海水中的腐蚀过程,采用电化学阻抗谱、浸泡试验、扫描电子显微镜研究工业纯铝在模拟海水中的腐蚀行为.结果表明:铝在模拟海水中发生点蚀的区域为富含Fe的晶间化合物处,点蚀半径随时间的增加而扩大.铝在模拟海水中的溶解曲线分为4个区间:活性溶解区、过渡区、过钝化区、钝化区.铝在模拟海水中,极化电位为过钝化区时,转移电阻R t随着电位的升高而变小,铝发生严重的点蚀;而极化电位为钝化区时,铝的转移电阻R t随着电位的升高基本不变,铝的溶解行为受到抑制.工业纯铝在模拟海水中发生点蚀的电位区间是-0.45～-0.65 V,钝化电位区间为-0.75～-0.85 V.     

双洞口配筋砌块砌体框支墙梁试验

为研究双洞口配筋砌块砌体框支墙梁地震前后的受力模式,在拟动力子试验前后进行了底层框架配筋砌块短肢砌体剪力墙结构三层足尺模型的竖向力静载试验.试验结果表明:托梁与上部墙体表现出良好的协同工作能力,其工作模式为拉杆拱.通过对其在拟动力试验前后的受力模式进行了比较,可知带洞口配筋砌块砌体框支墙梁结构体系在墙体受到一定损伤时,并不会使墙梁的受力机理发生明显改变.     

扩充编码符号的EZW改进算法

为了提高EZW算法的性能,分析发现EZW算法主扫描编码对最高频子带中不重要系数的编码存在冗余,且当重要系数的所有子孙系数都是不重要系数时的编码存在冗余.据此提出了扩充编码符号的EZW改进算法,用最高频子带的坐标作为限制条件来减少不重要系数的编码冗余;通过扩充编码符号和赋予原始EZW算法的4个编码符号新的适用范围的方案来减小第二种编码冗余.实验结果表明,本文算法使峰值信噪比提高0.9～2.3dB,从而证实了本文改进算法的有效性.     

A power-aware code-compression design for RISC/VLIW architecture

We studied the architecture of embedded computing systems from the viewpoint of power consumption in memory systems and used a selective-code-compression (SCC) approach to realize our design.Based on t...     

导电涂料的研制

为了获得性能优良的导电涂料 ,采用对比试验和正交试验的方法对导电涂料进行了研究 ,分别对导电涂料的电阻、硬度、耐冲击强度、柔韧性等性能进行了测试 ,经过试验 ,确定了无机导电涂料的最佳配方为 :石墨 10 0g ,铅酸钡 10g ,三氧化二锑 5g ,二氧化钛 35g ,碳化硅 10g ,硅酸盐溶胶 170g。以此配方研制出了一种成本较低、生产工艺简单、具有良好的导电、导热性能的无机导电涂料。     

Research on technology of desktop virtualization based on SPICE protocol and its improvement solutions

Increasingly mature cloud computing technology promotes virtual desktop technology, which can solve many problems existing in traditional computing models. However, virtual desktop solutions introduce the thorny problem of how to deliver a real desktop experience to users, as if they are using it locally, especially when playing video. The SPICE （simple protocol for independent computing environments） virtual desktop solution provides several image compression algorithms to address this problem with the purpose of making virtual desktops as real as possible. Although different compression algorithms can contribute their own abilities to different images to a large extent, switching between them is a big problem that consumes a large amount of resources to detect the different type of image and also causes jitter of the virtual desktop. This paper proposes a new solution, called SPICEx, using the JPEG2000 compression algorithm with dynamic compression ratios to solve the problem and finally validates that the performance is better than that of SPICE. With better quality of user experience and also reducing bandwidth consumption, SPICEx solution is meaningful in virtual desktop fields and can be widely used.     

基于无线通信方式的TV二次压降现场测试方法

针对传统的TV二次压降现场测试方法存在的问题,提出基于无线通信技术的检测方法。以提高工作效率,降低安全风险。