Characteristics of Metal Droplets in Slag Tapped from the Blast Furnace

Slag samples, hot‐metal samples and hot‐metal temperatures were obtained during tapping of two blast furnaces. Sampling was carried out at different time points during tapping of three separate heats. The size distribution and composition of metal droplets found in the slag were determined using scanning electron microscopy. Only metal droplets above 0.75 μm could be counted and analysed. All droplets were below 8 μm in diameter and the great majority of these droplets were found to be between 0.75 and 2 μm. The size distribution did not differ significantly for different slag samples. Iron was the main droplet component. Electron probe microanalysis showed that the droplets contained small amounts of carbon. The percentage of the area in a studied cross‐section that was covered with metal droplets varied between 0.01 and 0.07%. Calculations based on Stoke's law showed that the distance droplets travel in the slag is in the micron range. Slag samples taken in the beginning of slag tapping contained more droplets than those taken in the middle of slag tapping, an indication that most droplets can be found in the area near the furnace wall. Some droplets were determined to have magnesium enrichment at the external surface.     

提高高炉清循环冷却水系统浓缩倍数的对策研究

通过对宝钢1号高炉清循环冷却水系统的质能平衡测试和理论分析计算,找出了清循环水系统浓缩倍数偏低的真正原因,并提出了相应的技术措施,所做工作对同类系统有重要的指导意义。     

石墨炉原子吸收测定化探样品中痕量金的研究

采用以王水分解样品,泡沫塑料富集,硫脲解脱,石墨炉原子吸收分光光度计测定微量金。研究了测定时干燥温度和时间的选择,原子化温度和时间的选择,灰化温度和时间的选择,以及王水体积分数对吸附效果等条件对测定结果的影响。该方法检出限为0.2×10-9,经国家一级分析标准样品验证,结果与标准值相符。     

电炉还原熔炼氧化钴矿的生产实践

介绍了刚果(金)钴铜冶炼厂电炉还原熔炼处理钴铜氧化矿工艺的设计特点及生产实践。     

虚拟仪器在温度测控系统中的应用

虚拟仪器是由软件实现的，其软件开发平台是LabVIEW。以间歇式造气炉气化层的温度为例，用LabVIEW构建对造气炉气化层温度进行在线实时测量与控制的系统，从而可以降低操作人员的工作难度和强度，提高效率，达到对造气炉状态的实时控制。     

贺力氏Multi-Lab Hvdris定氢系统使用探讨及影响因素

本文主要介绍贺力氏Multi-Lab Hvdris定氢系统使用探讨及影响因素。     

100吨电炉自动控制系统设计及改进

本文介绍了安钢100吨电炉两级自动控制系统的设计方案，详细阐述了一级、二级自动控制系统的配置和功能，对于系统运行中出现的问题，提出了改进方案。     

贵冶VPSA制氧机作业率攻关与改造

阐述了江铜贵溪冶炼厂二期工程引进的一套3800m3/h真空变压吸附制氧机(简称VPSA)的基本原理、工艺特点,分析了实际运行过程中周期短、作业率低的主要原因,采取了相应的技术改造和维护措施。     

谈谈确定"停工检测点" "质量见证点"的方法

通过制造4台我国特大型非标冶炼回转炉的实践,以详实的实例,总结性地介绍了在特大型非标设备的制造中,怎样运用技术确定“停工检测点”、“质量见证点”,完成设备制造的成功经验。