一种有效减少ADI-FDTD数值色散的方法

ADI—FDTD算法的数值色散效应较为明显，本文的研究表明一种通过添加各向异性媒质来修正相速误差，从而减少FDTD数值色散的方法，同样适用于ADI-FDTD，且收效更为显著。数值运算结果证明该方法能够简单有效地去除较宽频带范围内的色散。     

Electro-organic synthesis without supporting electrolyte: Possibilities of solid polymer electrolyte technology

The application of ion exchange membranes as solid polymer electrolytes (SPE) in fuel cells is state-of-the-art. This technology needs no supporting electrolyte; consequently it can be applied for electro-organic syntheses in order to save process steps. In this case the process is not predetermined to a maximized energy efficiency so that the selection of the cell design, of the electrode materials and of the operating conditions can be focused on a high selectivity of the electrode reactions. The electro-osmotic stream, which is caused by the solvation shells of the ions during their migration through the membrane, and hence is a typical property of SPE technology, has a significant effect on the electrode reactions. It generates enhanced mass transfer at the electrodes, which is beneficial for reaction selectivity. It can be influenced by the choice of, and possibly by the preparation of, the membrane. An additional remarkable advantage of SPE technology is the exceptional long durability of oxide coated electrodes. By combination of several process engineering methods stable operation of SPE cells has been realized, even for examples of non-aqueous reaction systems. Experiments up to 6000 h duration and in cells of up to 250 cm² membrane area show the potential for industrial application.     

PZT陶瓷的断裂分析

与有限元法相比,无网格法由于只需节点不用单元而在压电分析中具有优越性。采用一个简单的包含有极化反转及电饱和影响的锆钛酸铅系压电陶瓷(PZT)的本构模型,以局部J积分作为断裂准则,应用再生核点法这一无网格数值法导出了作用电场与断裂载荷的关系曲线,该曲线的趋势与Park[1]的实验观察现象一致。计算程序采用面向对象方法实现。     

基于支持向量机的缓存预估模型的设计与实现

采用支持向量机(SVM)对网络业务流数据进行预测估计，通过训练样本，从而获得样本以外数据的分布规律。在此基础上，设计了一种网络排队队列缓存的预估模型。实验表明，该模型具有较高的训练效率和很高的估计精确度。     

Measurement Method of the Thickness Uniformity for Polymer Films

Several methods for investigating the thickness uniformity of polymer thin films are presented as well their measurement principles.A comparison of these experimental methods is given.The cylindrical lightwave feflection method is found to can obtain the thickness distribution along a certain direction.It is simple and suitable method to evaluate the film thickness uniformity.     

多分量波场的矢量法叠前深度偏移技术

本文研究了二维各向同性介质中两分量记录的矢量法叠前深度偏移方法———叠前逆时深度偏移方法。首先从弹性波波动方程出发,在交错网格空间中推导了各向同性介质中弹性波逆时延拓的高阶有限差分格式;然后从程函方程出发,采用逆时差分格式求解地下各点的地震波走时。为确保算法满足地震波传播的因果性条件及其对复杂模型的适应性,用扩展波阵面算法追踪波前并搜索全局极小,以上述方法的计算结果作为弹性波逆时偏移的成像条件,实现二维多分量资料的叠前逆时深度偏移。模型试算和实际单炮记录试验表明,叠前逆时深度偏移方法考虑了地震波的矢量特征,是一种有效的矢量波场处理技术。     

微带型Wilkinson功分器设计与实现

小型低功耗器件是射频电路设计的研究热点,而微带技术具有小型化低功耗的优点,为此在介绍微带型Wilkin-son功分器工作原理的基础上,使用基于矩量法的ADS软件设计、仿真和优化计算相关数据参数,并制作了一个微带功分器实例,最后对加工的样品进行实测,获得与仿真值吻合较好的预期结果。     

一种新型弹载偶极子天线分析与设计

给出了一种新型结构的弹载偶极子天线,采用基于自补结构的蛇形振子作为辐射器,并用矩量法对振子结构进行优化,采用简化形式的锥形BALUN以实现平衡馈电。测试结果表面该天线具有良好的E面全向特性和宽带特性。主要分析了该天线的辐射特性,最后给出并分析了实测数据。该天线具有结构紧凑、馈电简单、带宽较宽、易于制作等优点。     

Finite element piezothermoelasticity analysis and the active control of FGM plates with integrated piezoelectric sensors and actuators

 An efficient finite element model is presented for the static and dynamic piezothermoelastic analysis and control of FGM plates under temperature gradient environments using integrated piezoelectric sensor/actuator layers. The properties of an FGM plate are functionally graded in the thickness direction according to a volume fraction power law distribution. A constant displacement-cum-velocity feedback control algorithm that couples the direct and inverse piezoelectric effects is applied to provide active feedback control of the integrated FGM plate in a closed loop system. Numerical results for the static and dynamic control are presented for the FGM plate, which consists of zirconia and aluminum. The effects of the constituent volume fractions and the influence of feedback control gain on the static and dynamic responses of the FGM plates are examined. Received: 13 March 2002 / Accepted: 5 March 2003 The work described in this paper was supported by a grant awarded by the Research Grants Council of the Hong Kong Special Administrative Region, China (Project No. CityU 1024/01E).     

A suitable computational strategy for the parametric analysis of problems with multiple contact

The aim of the present work is to develop an application of the LArge Time INcrement (LATIN) approach for the parametric analysis of static problems with multiple contacts. The methodology adopted was originally introduced to solve viscoplastic and large‐transformation problems. Here, the applications concern elastic, quasi‐static structural assemblies with local non‐linearities such as unilateral contact with friction. Our approach is based on a decomposition of the assembly into substructures and interfaces. The interfaces play the vital role of enabling the local non‐linearities, such as contact and friction, to be modelled easily and accurately. The problem on each substructure is solved by the finite element method and an iterative scheme based on the LATIN method is used for the global resolution. More specifically, the objective is to calculate a large number of design configurations. Each design configuration corresponds to a set of values of all the variable parameters (friction coefficients, prestress) which are introduced into the mechanical analysis. A full computation is needed for each set of parameters. Here we propose, as an alternative to carrying out these full computations, to use the capability of the LATIN method to re‐use the solution to a given problem (for one set of parameters) in order to solve similar problems (for the other sets of parameters). Copyright © 2003 John Wiley & Sons, Ltd.