地震数据采集系统中频谱均衡滤波器的理论设计

地层的高频吸收衰减效应是导致地震勘探分辨率不高的主要原因，在高分辨率野外地震数据系统中，频谱均衡滤波器所设置的重要部件。文章以频谱均衡滤波器的原理和地层吸收衰减特性为基础，用计算机模拟的方法研究地层吸收衰减使分辨率降低的程度和频谱均衡滤波器对分辨率的补偿效果，给出了较好的频谱均衡滤波器的设计方案。     

A damage identification technique for CF/EP composite laminates using distributed piezoelectric transducers

In this study, a damage identification approach was developed for carbon fibre/epoxy composite laminates with localized internal delamination. Propagation of the Lamb wave in laminates and its interaction with the delamination were examined. The fundamental symmetric Lamb wave mode, S₀, and the lowest order shear wave mode, S₀^′, were chosen to predict damage location. A real-time active diagnosis system was therefore established. This technique uses distributed piezoelectric transducers to generate and monitor the ultrasonic Lamb wave with narrowband frequency. The two-way switches were employed to minimize the number of transducers. A signal-processing scheme based on the time–frequency spectrographic analysis was utilised to extract useful diagnostic information. Also, an optimal identification method was applied on damage searching procedure to reduce errors and obtain the diagnostic results promptly. Experiments were conducted on [0/−45/45/90]_s CF/EP laminates to verify this diagnosis system. The results obtained show that satisfactory detection accuracy could be achieved.     

The Effect of the Charge Fluctuation of Dust Parti-cles on Ion-acoustic Wave Excited Through Ionization Instability

The effect of the charge fluctuation of dust particles on ion acoustic wave (IAW) excited through ionization instability was investigated. The hydrodynamic equations and linear time-dependent perturbation theory served as the starting point of theory, by which the dispersion relation and growth rate of the IAW were given. By comparing the results with the case of constant dust charges, it was found that the charge fluctuation of dust particles reduces the instability of the wave mode.     

厚断面球铁的声速

论述了影响厚断面球铁声速和声波衰减的各种因素。指出，必须在应力状态下同时考核声速和声波衰减，以作为判别厚断面球铁材质的一种手段。     

A Low-Power Wide-Dynamic-Range Analog VLSI Cochlea

Low-power wide-dynamic-range systems are extremely hard to build. The biological cochlea is one of the most awesome examples of such a system: It can sense sounds over 12 orders of magnitude in intensity, with an estimated power dissipation of only a few tens of microwatts. In this paper, we describe an analog electronic cochlea that processes sounds over 6 orders of magnitude in intensity, and that dissipates 0.5 mW. This 117-stage, 100 Hz to 10 KHz cochlea has the widest dynamic range of any artificial cochlea built to date. The wide dynamic range is attained through the use of a wide-linear-range transconductance amplifier, of a low-noise filter topology, of dynamic gain control (AGC) at each cochlear stage, and of an architecture that we refer to as overlapping cochlear cascades. The operation of the cochlea is made robust through the use of automatic offset-compensation circuitry. A BiCMOS circuit approach helps us to attain nearly scale-invariant behavior and good matching at all frequencies. The synthesis and analysis of our artificial cochlea yields insight into why the human cochlea uses an active traveling-wave mechanism to sense sounds, instead of using bandpass filters. The low power, wide dynamic range, and biological realism make our cochlea well suited as a front end for cochlear implants.     

声波时差测井在鄂尔多斯天然气勘探中的地质应用

本文应用声波时差测井资料判别划分地层压实异常段,并结合其它测井资料对盖层进行质量评估,寻找油气有利聚集带(段),为勘探提供有利区域和评价依据。     

Features of ultrasonic wave propagation to identify defects in composite materials modelled by finite element method

A two-dimensional plane strain finite element model with absorbing boundary condition has been developed to investigate the ultrasonic wave propagation in isotropic and orthotropic media. It is capable of simulating the experimental pulse echo technique to obtain A-scan data, when a short duration pulse is transmitted into a domain with or without a flaw. The flaw can either be a crack or an inclusion of different material such as a Teflon insert or a resin rich zone. After performing FFT on the A-scan data, frequency domain feature analysis is done. The study provides a guideline regarding the suitability of certain harmonics sensitive to certain types of flaw. The simulation shows other important artifacts of wave propagation such as mode conversion and scattering due to the presence of flaws.     

耦合腔行波管慢波结构的工作模式及其特性

耦合腔行波管慢波结构可工作于三种不同模式：正常模、简并模和反向模。应用改进的等效电路法计算了正常模腔通带和槽通带。求得的简并模耦合槽张角与实验值相符。最后讨论了反向模耦合腔行波管诱人的特点。     

激光在材料中感生的瞬态光声波和光热波

研究了锁模激光在材料中产生频率达GHz的光声波和相应探测技术,用回波分析法无损坏测量了薄材料的厚度。研究了激光在材料中感生的光热波,热沉测量可用于解释材料的破坏机理。     

反向凝固法生产H90-钢-H90复合带

研究H90-钢-H90反向凝固复合过程中复合层厚度的变化规律以及复合带的组织和性能，探讨界面结合机理。结果表明：随着浸渍时间的增加，复合层的厚度变化经历了凝固生长、平衡相持和回熔3个阶段，钢带的预热温度越低，获得的最大复合层厚度越厚；H90复合层的组织为等轴晶粒，复合界面处Cu和Fe发生了扩散，而Zn未发生明显扩散，扩散层较薄，约为4μm；复合带的界面结合牢固；不同复合层厚度的复合带，其力学性能略有差异，但均达到GB5213——85所规定的F级深冲钢板的力学性能要求。