排序方式: 共有235条查询结果,搜索用时 15 毫秒
1.
Rosana Fatima Galindo Luis Antonio Barbosa Cortez Telma Teixeira Franco 《化学工程与技术》2020,43(8):1530-1537
An alternative for reducing emissions from marine fuel is to blend bio-oil from lignocellulose non-edible feedstocks to diesel fossil fuels. Phase diagrams of the ternary systems were built to represent the transition from heterogeneous regions to homogeneous regions. Four homogeneous blends of bio-oil of eucalyptus-bioethanol-marine gasoil were experimentally characterized with respect to the most important fuel parameters for marine engines: water content, flash point, low heating value, viscosity, and acidity. Blends with closer properties to marine gasoil replacement, lower costs, and environmental impacts should be tested for large engines. 相似文献
2.
Novel core-shell-like Ni-supported hierarchical beta zeolite catalysts on bioethanol steam reforming
《International Journal of Hydrogen Energy》2020,45(33):16409-16420
Hierarchical-Beta zeolites have been hydrothermally synthesized by adding a new gemini organic surfactant. The used gemini surfactant play the role of a “pore-forming agents” on the mesoscale, on the same time, providing alkaline environment for the system. With this hierarchical Beta zeolite as the core support, we successfully prepared a shell layer of Ni-containing (22 wt%) petal-like core-shell-like catalyst and applied it to bioethanol steam reforming. At the reaction temperature of 350 °C–550 °C, the conversion rate of ethanol and the selectivity of hydrogen were always above 85% and 70%. After reaction of 100 h on stream at 400 °C, there were not obvious inactivation could be observed on NiNPs/OH-MBeta catalyst. 相似文献
3.
Recent European Directives promoted the development of biofuels, requesting mandatory limits to their emissions ot greenhouse gases (GHG). Second-generation biofuels based on lignocellulosic biomass are prime candidates but their GHG emissions are variable and uncertain. Agro-ecosystem modeling can capture them and the performance of biofuel feedstocks.This study aimed at optimizing feedstock supply for a bioethanol unit in France, from agricultural residues, annual and perennial crops. Their productivity and environmental impacts were modelled on a regional scale using geo-referenced data on soil properties, crop management, land-use and future weather data. Several supply scenarios were tested. Cereal straw was the most efficient feedstock but had a low availability, and only miscanthus could meet the bioethanol plant's demand. Sorghum combined poor yields and high GHG emissions compared by miscanthus and triticale. A mix of three biomass sources used less than 3% of the regional agricultural land while abating GHG emissions by 60%. 相似文献
4.
《International Journal of Hydrogen Energy》2020,45(36):18241-18249
Bioethanol is an eco-friendly biofuel due to its merit that makes it a top-tier fuel. The present study emphasized on bioethanol production from hydrogen-rich syngas through fermentation using Sacharomyces cerevisiea. Syngas fermentation was performed in a tar free fermenter using a syngas mixture of 13.05% H2, 22.92% CO, 7.9% CO2, and 1.13% CH4, by volume. In the fermentation process, effects of various parameters including syngas impurity, temperature, pH, colony forming unit, total organic carbon and syngas composition were investigated. The yield of bioethanol was identified by Gas chromatography-Mass spectrometry analysis and further, it was confirmed by Nuclear magnetic resonance (1H) analysis. From GC-MS results, it is revealed that the concentration of bioethanol using Saccharomyces cerevisiae was 30.56 mmol from 1 L of syngas. Thus, hydrogen-rich syngas is suited for bioethanol production through syngas fermentation using Saccharomyces cerevisiae. This research may contribute to affordable and environment-friendly bioethanol-based energy to decrease the dependency on fossil fuels. 相似文献
5.
《International Journal of Hydrogen Energy》2021,46(79):39067-39078
Steam iron process represents a technology for H2 production based on iron redox cycles. FexOy are reduced by syngas/carbon to iron, which is subsequently oxidized by steam to produce pure H2. However, the system shows low stability.In this work, the effect of promoters (Al2O3, MgO and CeO2) on FexOy stability is investigated (10 consecutive redox cycles). Bioethanol is used as a reducing agent. The particles are synthesized by coprecipitation method, analysed by BET, XRD, SEM and tested in a fixed bed reactor (675 °C, 1 bar). Pure H2 is obtained controlling the FexOy reduction degree feeding different amounts of ethanol (4.56–1.14 mmol) until no CO is detected in oxidation. The results show that the promoters not only improve the thermal stability of FexOy but also affect its redox activity and react with iron forming spinel structures. MgO led to the highest activity and cyclability (H2 = 0.15 NL; E = 35%). 相似文献
6.
This paper presents a novel biomass pretreatment method that uses high pressured N2 and temperature to break the hemicellulose and lignin seal around the cellulose macro fibrils in the cell walls of the lignocellulosic biomass in order to open up the biomass structure for more efficient enzymatic hydrolysis. In this method the biomass is exposed to a high pressure using N2 gas, and temperature. Under pressure, cells of the lignocellulosic biomass are filled with a solution saturated with nitrogen. When the pressure is then suddenly released, the feedstock is exposed to an explosive decompression and the dissolved nitrogen is released from the solution. Sudden change in the volume breaks the cell walls and opens the biomass structure resulting in increased surface area of the substrate for enzymatic hydrolysis. No catalysts or chemicals were added in the process thereby, making it economically and environmentally attractive. In this research, a range of different pressures (1–60 bar) and temperatures (25–175 °C) were applied to barley straw to evaluate the efficiency of the pretreatment. The pretreatment was followed by enzymatic hydrolysis and fermentation. Resulting glucose and ethanol concentrations were measured and the yields were considered as an estimate for the most suitable set of pretreatment conditions. The results indicate that the highest glucose yield and hydrolysis efficiency were gained at 150 °C and 10–30 bars. The fermentation efficiency was lower at higher temperatures. Nonetheless, the highest ethanol yield was still gained at the same conditions. 相似文献
7.
The potential of wastes obtained from the cultivation of Manihot esculenta Crantz as raw material for bioethanol production was studied. The objective was to determine the optimal conditions of hemicellulose thermohydrolysis of cassava stems and peelings and evaluate their impact on the enzymatic hydrolysis yield of cellulose. An experimental design was conducted to model the influence of factors on the pentose, reducing sugar and phenolic compound contents. Residues obtained from the optimal pretreatment conditions were hydrolysed with cellulase (filter paper activity 40 FPU/g). The hydrolysates from pretreatment and enzymatic hydrolysis were fermented respectively using Rhyzopus spp. and Sacharomyces cerevisiae. The yield of enzymatic hydrolysis obtained under the optimal conditions were respectively 73.1% and 86.6% for stems and peelings resulting in an increase of 39.84% and 55.40% respectively as compared to the non-treated substrates. The ethanol concentrations obtained after fermentation of enzymatic hydrolysates were 1.3 and 1.2 g/L respectively for the stem and peeling hydrolysates. The pentose and phenolic compound concentrations obtained from the multi-response optimization were 10.2 g/L; 0.8 g/L and 10.1 g/L; 1.3 g/L respectively for stems and peelings. The hydrolysates of stems and peelings under these optimal conditions respectively gave ethanol concentrations of 5.27 g/100 g for cassava stems and 2.6 g/100 g for cassava peelings. 相似文献
8.
L.A. Rodríguez M.E. ToroF. Vazquez M.L. Correa-DaneriS.C. Gouiric M.D. Vallejo 《International Journal of Hydrogen Energy》2010
A suitable alternative to replace fossil fuels is the production of bioethanol from agroindustrial waste. Grape pomace is the most abundant residue in San Juan and sugar beet pomace could be important in the region. Solid-State Fermentation (SSF) is a technology that allows transforming agroindustrial waste into many valuable bioproducts, like ethanol. This work reports a laboratory scale SSF to obtain alcohol from grape and sugar beet pomace by means of Saccharomyces cerevisiae yeasts. The initial conditions of the culture medium were: sugars 16.5% (p/p); pH 4.5; humidity 68% (p/p). Cultures were inoculated with 108 cells/g of pomace, and incubated in anaerobic environment, at 28 °C, during 96 h. SSF showed ethanol maximum concentrations at 48 h and ethanol yield on sugars consumed was more than 82%. Yield attained creates expectation about the use of SSF to obtain fuel alcohol. 相似文献
9.
A.M. Kostin G. Guillén-Gosálbez F.D. Mele M.J. Bagajewicz L. Jiménez 《Chemical Engineering Research and Design》2012
In this paper, we address the strategic planning of integrated bioethanol–sugar supply chains (SC) under uncertainty in the demand. The design task is formulated as a multi-scenario mixed-integer linear programming (MILP) problem that decides on the capacity expansions of the production and storage facilities of the network over time along with the associated planning decisions (i.e., production rates, sales, etc.). The MILP model seeks to optimize the expected performance of the SC under several financial risk mitigation options. This consideration gives a rise to a multi-objective formulation, whose solution is given by a set of network designs that respond in different ways to the actual realization of the demand (the uncertain parameter). The capabilities of our approach are demonstrated through a case study based on the Argentinean sugarcane industry. Results include the investment strategy for the optimal SC configuration along with an analysis of the effect of demand uncertainty on the economic performance of several biofuels SC structures. 相似文献
10.
Stefanos E. Kavargiris Andreas P. Mamolos Constantinos A. Tsatsarelis Anna E. Nikolaidou Kiriaki L. Kalburtji 《Biomass & bioenergy》2009,33(9):1239-1250
An energy analysis, in conventional and organic vineyards, combined with ethanol production and greenhouse gas emissions, is useful in evaluating present situation and deciding best management strategies. The objective of this study was to evaluate the differences in the energy flow between organic and conventional vineyards in three locations, to calculate CO2, CH4 and N2O-emissions based on the used fossil energy and to explore if wine industry wastes can be used to extract bioethanol. The data were collected through personal interviews with farmers during 2004–2005. Eighteen farmers, who owned vineyards about 1 ha each, were randomly selected to participate in this study [(3 conventional and 3 organic) × 3 locations]. The means averaged over all locations for fertilizer application, plant protection products application, transportation, harvesting, labor, machinery, fuels, plant protections products and tools energy inputs, total energy inputs, outputs (grapes), outputs (grapes + shoots), grape yield, man hour, pomace and ethanol from pomace were significantly higher in conventional than in organic vineyards, while the opposite occurred for the pruning. Means averaged over two farming systems for harvesting, tools energy inputs, energy outputs (grapes), grape yield, pomace and ethanol from pomace were significantly higher at location A, followed by location C and location B. Finally, for irrigation, the means averaged over the two farming systems were significantly lower at location C. Greenhouse gas emissions were significant lower in organic than in conventional vineyards. The results show a clear response of energy inputs to energy outputs that resulted from the farming system and location. 相似文献