大口径光学透镜瞬态温度场模拟

为考察热辐射效应对光学元件稳、瞬态温度场的影响,给出了考虑辐射和导热耦合换热情况下复杂几何结构光学透镜稳、瞬态热特性的适体坐标下离散坐标法.对喷管形和圆柱形介质进行计算并与其他方法比较表明,建立的适体坐标系下辐射与导热耦合换热计算方法精度较好.对两端为球缺中间为圆柱的大口径透镜内的辐射与导热耦合换热过程进行了数值模拟.计算结果表明,为了精确地预测半透明介质如透镜内的温度分布,应该考虑辐射与导热耦合作用,且应当考虑介质的光谱特性.     

An improvement to the simulation of phase-change heat-transfer during soil freezing and thawing

A new variable time step method, which is called the backwards calculating time step method, is presented in this paper. It allows numerical simulation of soil freezing and thawing while avoiding "phase change missing and overflowing". A sensitive heat capacity model is introduced through which the calculation errors are analyzed. Then the equation using the self-adjusted time step is presented and solved using finite differences. Through this equation, the time needed for a space cell to reach the phase change point temperature is calculated. Using this time allows the time step to be adjusted so that errors caused by "phase change missing and overflowing" are successfully eliminated. Above all, the obvious features of this method are an accelerated rate for adjusting the time step and simplifing the computations. An actual example proves that this method can accurately calculate the temperature fields during soil freezing and thawing. It is an improvement over traditional methods and can be widely used on com- plicated multi-dimensional phase change problems.     

高炉铜冷却壁凝固过程数值模拟

在对铜冷却壁砂型 金属型复合铸造条件下的热态工况进行分析的基础上,利用有限元数值模拟的方法首次建立了铸型传热分析对称模型。在模型中对铸型传热系统中的对流、辐射、接触边界条件和凝固潜热进行了处理,利用有限元分析软件ANSYS,分析了紫铜冷却壁的温度场的变化。数值模拟的结果与实际生产相当吻合。     

Simulation of local effect of reinforcement on temperature field during solidification of aluminum metal matrix composite

The effect of reinforcement on the solidification of pure metal matrix composites （MMCs） was simulated using a two-dimensional solidification temperature field model by the finite element method. The concept of the character length was proposed to describe the size of reinforcement local heat influential zone in MMCs solidification according to the change of the morphologies of solid-liquid interface. The relationship between the character length and the geometrical conditions, the boundary condition and physical properties of the reinforcement were studied, respectively. The results show that the width of the unit and the cold boundary temperature have no effect on the character lengths but have effect on the distance between cold boundary and reinforcement （/） and the thermal parameters of the reinforcement. An experimental rule to predict the value of the character length was derived and applied.     

坝址区垂直温度场及其水文地质意义——以湖北溇水江坪河水电站为例

江坪河水电站坝址区钻孔内分层水温随埋深增大而上升,钻孔孔底水温17.16℃~19.83℃为所处河湾地块岩溶地下水代表性水温,钻孔顶面水温15.88℃~16.30℃与河水水温15.81℃相近,反映了坝址区河水位比下伏岩溶水位高,部分河水下渗补给下伏岩溶水。通过比较得出,左岸ZK17与右岸ZK19一线,河水对岩溶地下水下渗补给比下游ZK79、ZK36地段强烈。分层测温这种简单易行的研究分析方法对具有复杂水动力场的同类型岩溶峰丛峡谷建坝有一定参考意义。     

固态功率组件热耦合效应研究

文中基于热叠加原理研究了固态功率组件中多个离散分布的集中热源的热耦合效应,并证明强迫对流下应用热叠加原理计算的温度场与整场系统数值模拟的结果相当吻合,用它来进行热耦合效应的分析研究是有效的.     

载流导体的二维温度场的分析

为分析机电设备导体中电流引起的热分布问题,建立了机电设备的简化有限元模型,对导体进行了自适应网格划分,采用有限元方法求解热导微分方程,得到导体中热分布情况,可以估算导体的形状和尺寸,为机电设备选择合适的导体提供了一种有效的设计方法。     

浅谈涂布烘箱设计

探讨了涂布烘箱的设计方法,较系统地讨论了设计对流式涂布烘箱的內容、各种参数的确定等有关问题.     

多元回归分析在电热式平板硫化机热板温度场中的应用

分析电热平板硫化机热板温差大的主要影响因素,重点研究热源分布情况对温差的影响.以400×400电热平板硫化机为例,应用多元回归的二次响应曲面模型及其子模型,对热源间距(电热管间距)与热板表面最大温差之间的函数关系进行预测,检验并分析预测结果(拟合曲线)的可靠程度,从而得出较合理的数学模型,即完整二次响应曲面模型.此模型可为工程设计提供参考依据.     

低温冰箱内温度场的有限元分析

认为有限元分析方法FEM(funite elementmethod)是一种应用非常广泛的数值计算方法;介绍了ANSYS有限元分析软件,并利用ANSYS软件对一台低温冰箱内的温度场进行计算和分析;提出了优化箱内温度场均匀分布的措施.