东海西湖凹陷探井钻井完井液技术

介绍了东海西湖凹陷的储层特征。在分析探井储层损害原因的基础上，提出了优化的海水钻井完井液体系。两口井应用表明，储层保护效果明显。     

高Q Ba(Zn_(1/3)Ta_(2/3))O_3介质谐振器材料及其在毫米波系统中的应用

叙述了Ｂａ（Ｚｎ１／３Ｔａ２／３）Ｏ３介质谐振器材料的制备、结构、微波性能及典型应用。Ｂａ（Ｚｎ１／３Ｔａ２／３）Ｏ３介质材料介电常数εｒ为２９．５，频率温度系数τ≈０（－５５～＋８５℃），１０ＧＨｚ下最大无载Ｑ值１４７００，在２８ＧＨｚ测得Ｑ值约为４８００。这种材料具有高Ｑ值，特别适用于Ｘ以上波段作为振荡器电路中频率稳定元件。用这种介质谐振器已研制出８ｍｍ介质稳频微带耿氏振荡器，频率稳定度小于１０15;１０－６／℃，最大输出功率达１８０ｍＷ。     

Modular implementation of efficient self-checking checkers for the Berger code

A technique for designing efficient checkers for conventional Berger code is proposed in this paper. The check bits are derived by partitioning the information bits into two blocks, and then using an addition array to sum the number of 1's in each block. The check bit generator circuit uses a specially designed 4-input 1's counter. Two other types of 1's counters having 2 and 3 inputs are also used to realize checkers for variable length information bits. Several variations of 2-bit adder circuits are used to add the number of 1's. The check bit generator circuit uses gates with fan-in of less than or equal to 4 to simplify implementation in CMOS. The technique achieves significant improvement in gate count as well as speed over existing approaches.     

Change in the decomposition mode of 1-propanamine due to the presence of cations in MFI zeolite

The adsorption and thermal analysis of 1-propanamine has been compared over MFI zeolites which contain H, Ga, and In cations. In the case of H⁺-containing materials, NH₃ and propene are simultaneously desorbed above 600 K. This behavior, is well known and characteristic of the Hofmann elimination reaction. However, a distinctly different mode of reaction is observed in the case of Ga and In containing materials. NH₃ is released below 600 K, propene and other products are released above 600 K, and a stable residue remains above 800 K. It is suggested that such behavior results from Lewis acid interactions of Ga or In cations with propanamine.On leave from the Bulgarian Academy of Sciences, Institute of Organic Chemistry.     

氢对2.25Cr-1Mo压力容器用钢力学性能影响

基于试样高温高压釜充氢方法 ,研究了氢对 2 2 5Cr 1Mo压力容器用钢力学性能的影响。对充氢前后的试样进行了拉伸和CVN冲击试验 ,结果表明 ,氢对 2 2 5Cr 1Mo钢的拉伸力学性能和冲击韧性影响不显著。     

离子液体催化C_5馏分中二烯烃的聚合反应

合成了多种基于1-丁基-3-甲基咪唑阳离子的离子液体,并作为裂解C5馏分中混合二烯烃聚合反应的介质。考察了离子液体种类、反应温度、反应时间和添加Lew is酸对混合二烯烃聚合反应的影响。实验结果表明,以硝酸根为阴离子的离子液体对混合二烯烃的聚合反应具有一定的阻聚作用;以六氟磷酸根为阴离子的离子液体能明显促进混合二烯烃的聚合反应,提高二聚物的含量;添加Lew is酸(质量分数为1%的ZnCl2)的离子液体对混合二烯烃的聚合反应具有更明显的促进作用,其效果仅次于酸性氯铝酸类离子液体,反应温度以30℃以下为宜,温度过高将促使二聚物进一步聚合,形成三聚物乃至多聚物,降低二聚物的含量。     

中国第一口超千米深水钻井液技术

LW3-1-1探井位于中国南海珠江口盆地，作业水深1480m，完钻井深为3843m，地层以大套灰色泥岩和页岩为主，具有强水敏性．要求钻井液具有良好的流变性、润滑性、抑制性，良好的抗盐、抗钙、抗高温和抗低温能力，以及强的天然气水合物抑制能力。该井采用了PFMX钻井液体系，钻井周期为49d，介绍了钻井液工艺及现场应用情况。PFMX体系表现出很多油基钻井液的优点，如好的润滑性、高的钻进速率、膜效应、强的井眼稳定及页岩抑制性，解决了强水敏性地层的井壁稳定等问题，还解决了深水钻井中遇到的挑战，如低的破裂压力梯度、天然气永合物、浅层水流、深水低温等问题，满足了该区块作业需要。     

Low-cycle fatigue behavior of Sn-Ag, Sn-Ag-Cu, and Sn-Ag-Cu-Bi lead-free solders

Low-cycle fatigue (LCF) tests on as-cast Sn-3.5Ag, Sn-3Ag-0.5Cu, Sn-3Ag-0.5Cu-1Bi, and Sn-3Ag-0.5Cu-3Bi solders was carried out using a noncontact strain-controlled system at 20°C with a constant frequency of 0.1 Hz. The addition of Cu does not significantly affect the fatigue life of eutectic Sn-Ag solder. However, the fatigue life was significantly reduced with the addition of Bi. The LCF behavior of all solders followed the Coffin-Manson relationship. The fatigue life of the present solders is dominated by the fracture ductility and can be described by the ductility-modified Coffin-MansonR17;s relationship. Steps at the boundaries of dendrite phases were the initiation sites for microcracks for Sn-3.5Ag, Sn-3Ag-0.5Cu, and Sn-3Ag-0.5Cu-1Bi solders, while for Sn-3Ag-0.5Cu-3Bi solder, cracks initiated along both the dendrite boundaries and subgrain boundaries in the dendrite phases. The linking of these cracks and the propagation of cracks inside the specimen occurred both transgranularly through eutectic phases and intergranularly along dendrite boundaries or subgrain boundaries.     

5ZV25J-10160窄V胶带失效原因及改进措施

对川南矿区使用的5ZV25J－10160联组窄V胶带的损坏情况进行了观察分析，主要损坏原因有：胶带V形夹角与带轮轮槽夹角不一致，胶带顶部宽度与带轮轮槽开口宽度不符合要求，在传递动力中造成带轮顶部与胶带联结层接触而单根胶带悬空；胶带硫化质量差、配组不当；胶带及带轮安装、调校未达到要求。对此提出如下改进措施：规定胶带V形夹角和带轮轮槽夹角均为40°，单根胶带顶部宽25mm，带轮轮槽开口宽23．4mm；胶带必须严格按规定配组、安装、调校。实践证明，经改进后胶带传动平稳，无异常损坏。     

高能超声处理Al-1Si合金凝固组织分析

采用高能超声处理Al-1Si合金熔体,借助金相显微镜和电子探针进行组织分析,并测定合金的熔化潜热,分析了熔体中超声空化效应和声流效应影响凝固过程的机理。结果表明,试样晶粒平均尺寸由超声处理前的94μm减小到超声处理后的34μm;合金试样的熔化吸热量由263.90J/g降低为159.81J/g,在熔体中施加高能超声显著改善了合金成分的均匀性并细化了晶粒。