Experimental Study on the Aging of Sands

Aging effects in sand, such as increases in cone penetration resistance with time after deposition and/or densification, are known to occur in the field, but the causes of these effects are not fully understood. A laboratory testing program was designed to study mechanisms responsible for aging effects under controlled conditions. The testing program included measurements of the small strain shear modulus, electrical conductivity, pore fluid chemistry, and minicone penetration resistance after different periods of aging. Two different sands were tested, and aging effects were evaluated for different combinations of relative density, temperature, and pore fluid composition. Increases in the small strain shear modulus were observed throughout most of the tests, and chemical analyses suggest that precipitation of carbonate and silica occurred in two tests. Despite these changes, there was no corresponding increase in the minicone penetration resistance with time in any of the tests. It is unlikely that precipitation of carbonate or silica is responsible for aging effects in sands; other possible mechanisms include arching due to dissipation of blast gases and redistribution of stresses through the soil skeleton. An additional possibility is that the boundary conditions imposed by the laboratory tests obscure changes in penetration resistance that would be measured had the volume of sand tested been much larger. The implications of these findings in terms of other published field and laboratory studies are discussed.     

Environmental Fatigue and Static Behavior of RC Beams Strengthened with Carbon-Fiber-Reinforced Polymer

Many countries around the world have tremendous needs to repair and strengthen their transportation infrastructure. Almost everywhere, traffic loads have reached levels largely exceeding design expectations. Northern countries also experience severe winter conditions that are combined with an extensive use of deicing salts and accelerate structural deterioration. In Canada, the extent of deterioration has prompted many authorities, including the federal and provincial governments, to investigate the potential use of fiber-reinforced polymer products to extend the life of their existing structures. However, it is widely recognized that the large-scale implementation of these products is often impaired by the lack of data on their durability. This paper presents an experimental project undertaken in order to assess the durability of reinforced concrete beams externally strengthened with two types of carbon-fiber-reinforced polymer (CFRP). The beams were first exposed to either wet-dry cycles or continuous immersion in water and then were loaded in fatigue. Finally, they were tested quasi-statically under four-point bending up to failure. The test results presented here provide some insights on the potential long-term performance of CFRP-strengthened beams exposed to severe environmental conditions.     

Study of the impact of reactants utilization on the performance of PEMFC commercial stacks by impedance spectroscopy

Reactants utilization is a key stake for a PEMFC system: a too low utilization leads to a waste of reactant but a too high utilization may result in a detrimental starvation. To study these impacts, two commercial stacks were characterised by impedance spectroscopy under different hydrogen and oxygen utilizations (from nominal conditions to quasi-starvation). One was fresh while the other was operated on-field during 10,000 h. This study shows that the two capacitive loops in the lowest frequency range (1 Hz and below) correspond respectively to oxygen and hydrogen mass transfer limitations: the limiting reactant can be clearly identified from the impacted frequencies. The size of these loops was increased by up to 30% when the cell operated at high reactant utilizations. These results could therefore pave the way to the development of algorithms able to estimate the degree of starvation of some cells.     

Effects of blade tenderization,aging method and aging time on meat quality characteristics of Longissimus lumborum steaks from cull Holstein cows

The effects of blade tenderization (BT), two aging methods (dry (D) and wet (W)), and aging time (2 and 23 d) on tenderness, color, and sensory properties of Longissimus lumborum muscles from 12 cull Holstein cows were evaluated. Dry-aged loins had higher combined trim and aging losses than control (C) for both D- and W-aging, mostly because of excess trim losses. BT steaks had WBSF of 33.13 N while C steaks had WBSF of 41.46 N (P = 0.09). Aging decreased WBSF. Blade tenderized steaks had higher cook loss than C steaks. Aging, W-aging, and BT × W-aging improved myofibrillar (sensory) tenderness scores. Aging and/or BT improves sensory panel tenderness cull cow Longissimus lumborum steaks. Aging and blade tenderization combined can increase tenderness and value of Longissimus steaks from cull Holstein cows.     

Impact of compression,physical aging,and freezing rate on the crystallization characteristics of an amorphous sugar matrix

Amorphous matrices made up of sugar molecules, are frequently used in food and pharmaceutical industries. A drawback to their use is that they are susceptible to collapse, as a result of water uptake and an increase in temperature and subsequently crystallize. Herein, the crystallization characteristics of amorphous sugar (sucrose and α-lactose) preparations were analyzed, with the purpose of obtaining knowledge that could lead to the prediction of how long the amorphous state is retained under various conditions. The impact of compression, physical aging and freezing rate on the induction period (t_ind) for crystallization were examined. Freeze-dried sugar samples were compressed at 74 or 443 MPa (5 min) and then rehumidified at specified RHs. Some freeze-dried sucrose samples were physically aged, and alternatively freeze-drying was conducted under different conditions. The isothermal crystallization of the prepared samples at different temperatures (T), the glass transition and the crystallization temperature (T_cry) were measured, using differential scanning calorimetry. The compression markedly decreased the t_ind, while significantly lowered the hygroscopicity. Physical aging and slower-freezing also shortened the t_ind. The t_ind was found to be correlated exclusively with (T_cry–T), regardless of rehumidification, compression, sugar type, physical aging and freezing rate in the freeze-drying process.     

The use of Information and Communication technology when completing instrumental activities of daily living

Purpose of the studyAn important aspect of cognitive assessment is inquiry of the patient’s ability to manage instrumental activities of daily living (IADLs), including finances, medication, and transportation. Information and Communication technology (ICT, e.g. smartphones, computers) has become increasingly prevalent in American culture. We aimed to characterize what IADLs were being completed with ICT, and what factors predict ICT use to manage IADLs.Design and methodsWe administered a self-report survey to 505 Veterans seeking care at the VA Greater Los Angeles Healthcare System.ResultsSeventy percent reported regular ICT use. Of ICT users, 76% reported use for finances, 86% for shopping, 72% for health management, 75% for transportation, and 97% for communication. Logistic regression was used to identify predictors of high ICT use. Longer duration of computer use was significant in all models. Younger age, higher education, and better self-reported memory were associated with greater use for a subset of IADLs. Veterans with more health problems were more likely to use ICT to manage their healthcare.ImplicationsThese findings suggest that Veterans are using ICT to support IADLs. It appears appropriate for clinicians to incorporate questions about ICT use into IADLs assessment, which may assist in detecting subtle changes to day to day functioning and improve the accurate diagnosis of cognitive disorders.     

Driving behaviors in early stage dementia: A study using in-vehicle technology

According to the Alzheimer's Association (2011), (1) in 8 people age 65 and older, and about one-half of people age 85 and older, have Alzheimer's disease in the United States (US). There is evidence that drivers with Alzheimer's disease and related dementias are at an increased risk for unsafe driving. Recent advances in sensor, computer, and telecommunication technologies provide a method for automatically collecting detailed, objective information about the driving performance of drivers, including those with early stage dementia. The objective of this project was to use in-vehicle technology to describe a set of driving behaviors that may be common in individuals with early stage dementia (i.e., a diagnosis of memory loss) and compare these behaviors to a group of drivers without cognitive impairment. Seventeen drivers with a diagnosis of early stage dementia, who had completed a comprehensive driving assessment and were cleared to drive, participated in the study. Participants had their vehicles instrumented with a suite of sensors and a data acquisition system, and drove 1–2 months as they would under normal circumstances. Data from the in-vehicle instrumentation were reduced and analyzed, using a set of algorithms/heuristics developed by the research team. Data from the early stage dementia group were compared to similar data from an existing dataset of 26 older drivers without dementia. The early stage dementia group was found to have significantly restricted driving space relative to the comparison group. At the same time, the early stage dementia group (which had been previously cleared by an occupational therapist as safe to drive) drove as safely as the comparison group. Few safety-related behavioral errors were found for either group. Wayfinding problems were rare among both groups, but the early stage dementia group was significantly more likely to get lost.     

丙烯酸树脂/LDH纳米复合材料的合成及其耐老化性研究

主要采用成核/晶化隔离法制备纳米双羟基复合金属氧化物(LDH)并改性,再用乳液聚合法合成丙烯酸树脂/LDH纳米复合乳液。利用FTIR、SEM和材料试验机对其进行结构和力学性能表征。结果表明:最佳反应温度为80℃,反应时间为2.5 h,催化剂的用量为0.2 g。并在该条件下成功地合成了丙烯酸树脂/LDH纳米复合材料;并随着LDH含量的增加其成膜速度,膜的透明度,耐老化性都有所提高;但当LDH的含量超过一定值时,其各项性能呈下降趋势。当LDH的含量为3%时,复合材料的各项性能均达到了最佳状态。     

A new method for in situ measurement of parameters and degradation processes in modern nanoscale programmable devices

This paper presents a new method and results from measurement of internal parameters of programmable nanoscale circuits, namely Xilinx FPGA devices and especially Zynq SoC devices designed on 28 nm TSMC’s technology and older 45 nm Spartan 6 device as well as Xilinx Virtex product lines. The method utilizes a new undersampling approach for frequency measurement and an easy way of processing BRAM data streams. The proposed flexible circuits have been used in various measurements of timing parameters and delays in FPGAs, including measurements or detection of the aging issues. The paper presents results of measurements under various core voltage values as performed on selected Xilinx FPGA platforms, including key results about limited usability of the latest 28 nm devices under accelerated conditions and possibility of studying or mitigating aging effects in FPGAs. The paper presents rare results of experiments, real measurements and data available from current as well as previous technology nodes and it attempts to uncover new facts and areas of the latest high-end technologies, including the area of aging and degradation processes in general. The new methodology, presented approach and results can also be used in various dependable systems, including selected aerospace, medical, automotive or transportation ones. It is also directly and easily applicable to modern processor and multicore systems.     

The analysis for morphological evolution and crystallography of degenerate pearlite in 100Mn13 steel

During approximate 773 K aging treatment of 100Mn13 steel, degenerate pearlite will occur and evolve into lamellar pearlite during growth process. The microstructures of degenerate pearlite and its evolutionary lamellar pearlite are observed by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The results show that after 748 K, 773 K and 798 K aging, degenerate pearlites occur at grain boundary. At growth front of degenerate pearlite forming at 773 K and 798 K, pearlite presents a morphology of short lamellae of carbide and ferrite, indicating a trend of developing into lamellar pearlite. The higher the temperature is, the more obvious the trend is, and even a conventional lamellar pearlite has developed. However, there is no morphological evolution for degenerate pearlite forming at 748 K aging. Besides, the constituents of degenerate pearlite is identified as M₂₃C₆ and ferrite, and Kurdjumov-Sachs orientation relationship exists between them, (01 )_α//( 1 )_M23C6, [111]_α//[110]_M23C6. This orientation relationship maintains in morphological evolution from degenerate pearlite to lamellar pearlite.