Preparation of Mesostructured Lamellar Zirconia

Mesostructured lamellar zirconia was synthesized in the hydrothermal systems using Cetyltrimethyl Ammonium Bromide (CTAB) as a template and zirconyl chloride as zirconium precursor. The as-prepared composites were characterized by X-ray diffraction (XRD), TG-DTA, and DR-UV techniques. The influences of hydrothermal aging time, total concentration of solution, different mole ratio of zirconyl chloride/surfactant, and post treatment on the structure of mesostructured lamellar zirconia were discussed in this article.     

Constitutive modeling of the aging viscoelastic properties of portland cement paste

Analytical approaches for modeling aging viscoelastic behavior of concrete include the time–shift approach (analogous to time-temperature superposition), the solidification theory, and the dissolution–precipitation approach. The aging viscoelastic properties of concrete are generally attributed solely to the cement paste phase since the aggregates are typically linear elastic. In this study, the aging viscoelastic behavior of four different cement pastes has been measured and modeled according to both the time–shift approach and the solidification theory. The inability of each individual model to fully characterize the aging viscoelastic response of the materials provides insight into the mechanisms for aging of the viscoelastic properties of cement paste and concrete. A model that considers aging due to solidification in combination with inherent aging of the cement paste gel (modeled using the time–shift approach) more accurately predicted the aging viscoelastic behavior of portland cement paste than either the solidification or time–shift approaches independently. The results provide evidence that solidification and other intrinsic gel aging mechanisms are concurrently active in the aging process of cementitious materials.     

Aging effects and electrical stability in pentacene thin film transistors

We have studied the transfer characteristic variations induced by aging effects and applied voltage in top contact pentacene thin film transistors (OTFTs) fabricated by using Polymethylmetacrylate buffer layer. The electrical stability of pentacene OTFTs was tested by applying prolonged bias stress (up to 10⁴ s) with gate voltage V_gstress = − 30 V and + 30 V. The environmental effects were analysed by measuring the degradation of electrical characteristics of OTFT exposed to air. The results have been analysed in terms of trap state model, evaluating the channel conductance using a one-dimensional approach. This allows us to correlate the transfer characteristics variations to changes in localised state distribution.     

基于IRC和电热加速老化试验的XLPE电缆绝缘性能研究

为了研究66 kV XLPE电力电缆的绝缘性能,文中采用自主设计的加速老化试验平台,同时对三根样品电缆分别进行两个阶段的电老化、热老化以及电热联合老化.利用等温松弛电流法(IRC)分别对加速老化前后的样品电缆进行试验,分析老化因子的改变,研究电缆的绝缘性能变化.试验结果表明:经过两个阶段的加速老化试验,电老化样品老化因子分别增加3.70%和4.21%,而热老化样品老化因子分别增加4.82%和23.42%,说明电应力和热应力在影响绝缘老化性能中,热应力的“贡献”更大,且温度越高,热应力起到的作用越大;电热联合双应力作用下的样品老化因子分别增加13.04%和37.50%,电热联合作用下老化因子变化远大于单一应力作用的样品老化因子变化,说明电、热两种应力存在某种协同作用,联合作用会加快电缆绝缘劣化.     

Single-machine due-window assignment and scheduling with resource allocation,aging effect,and a deteriorating rate-modifying activity

We consider single-machine scheduling with a common due-window and a deteriorating rate-modifying activity. We assume that the processing time of a job is a function of the amount of a resource allocated to it, its position in the processing sequence, and its aging effect. The objective is to minimize the total cost, which is a function of earliness, tardiness, due-window starting time, due-window size, and resource consumption. We consider two models of the job processing time function and provide polynomial-time solution algorithms for the corresponding problems. We also give a more efficient solution algorithm for a special case of the second problem.     

Explosion Performance of High‐Temperature Degraded Emulsion Explosives

Experiments were conducted to study the underwater explosion performance of emulsion explosives (EE) after hot water bath. Spherical charges of EE with different sensitizers and hot water bath were prepared and tested. As for as‐prepared charges, the detonation velocity experiments and underwater explosion experiments were carried out and the crystallization ratio was measured and calculated by the dissolution and neutralization method. The results showed an inverse relationship between explosion parameters (pressure peak, specific impulse, detonation velocity and specific total energy) and heating time. It also revealed that the effective explosive weight of EE was reduced with long time of hot water bath. Moreover, the crystallization ratio and the decreasing rate of explosion parameters of EE sensitized by NaNO₂ were apparently higher than EE containing physical sensitizers (glass microballoon and perlite), which was attributed to the different destruction mechanism of EE. After 6‐hour hot water bath, the EE containing physical sensitizers still retained detonator sensitivity and more than 80 % of specific total energy. Meanwhile, the crystallization ratio was less than 20 %. Whereas, the EE sensitized by NaNO₂ lost the detonator sensitivity and the crystallization ratio of EE was also above 40 %.     

Thermal aging of Pd/Pt/Rh automotive catalysts under a cycled oxidizing–reducing environment

Mono- and multi-metallic (bi- and tri-) Pt, Pd and Rh supported on cerium-promoted alumina (La Roche, SAS-1/16) catalysts were tested for activity as TWC, both fresh [G.C. Koltsakis, and A.M. Stamatelos, Progr. Energy Combust. Sci. 23 (1997) 1] and after accelerated aging. Aging consisted of a treatment at 900°C for 5 h during which an oxidizing (2.5% O₂, 10% H₂O, in N₂) and a reducing (5.0% CO, 10% H₂O, in N₂) feedstream were cycled at 0.017 Hz through the catalyst. Activity tests were carried out by increasing temperature from 100 to 600°C at 3°C min⁻¹, while two oxidizing and reducing (±0.5 A/F) feedstreams were alternately (1 Hz) fed through the reactor at 125 000 h⁻¹ (STP). Conversion was continuously analyzed. Light-off temperature, T₅₀, conversion at 500°C (normal running temperature), X₅₀₀, and the stoichiometric window (A/F from 14.13 to 15.13) for stationary feedstreams, were determined.     

Effect of long-term stress and temperature exposure on the fracture toughness of Ti-62222 alloy

Fracture toughness tests were conducted on a Ti-62222 (titanium alloy) sheet being considered for use in high temperature aircraft applications in the as received condition and after exposing the pre-cracked specimens to a sustained stress intensity, K, level between 55 and 60.5 MPa for 200 h at 350°C. It was concluded that the fracture toughness does not degrade as a result of exposure to high temperature and the K levels in this material. The tensile strength in the exposed condition also remained the same as in the as received condition.     

Aging fingerprint characterization of beer using electronic nose

In this work, attempts were made in order to characterize the change of aroma of alcoholic and non alcoholic beers during the aging process by use of a metal oxide semiconductor based electronic nose. The aged beer samples were statistically characterized in several classes. Linear techniques as principal component analysis (PCA) and Linear Discriminant Analaysis (LDA) were performed over the data that revealed non alcoholic beer classes are separated except a partial overlapping between zones corresponding to two specified classes of the aged beers. A clear discrimination was not found among the alcoholic beer classes showing the more stability of such type of beer compared with non alcoholic beer. In this research, to classify the classes, two types of artificial neural networks were used: Probabilistic Neural Networks (PNN) with Radial Basis Functions (RBF) and FeedForward Networks with Backpropagation (BP) learning method. The classification success was found to be 90% and 100% for alcoholic and non alcoholic beers, respectively. Application of PNN showed the classification accuracy of 83% and 100%, respectively for the aged alcoholic and non alcoholic beer classes as well. Finally, this study showed the capability of the electronic nose system for the evaluation of the aroma fingerprint changes in beer during the aging process.     

Influence of liquid nitrogen quenching on the evolution of metastable phases during plasma spraying of (ZrO2–5 wt.% Y2O3)–20 wt.% Al2O3 coatings

The preparation of nanostructured (ZrO₂–5 wt.% Y₂O₃)–20 wt.% Al₂O₃ coatings by atmospheric plasma spraying of commercially available micron-scale powders is reported. Materials were prepared by means of a standard spraying technique and by using an improved technique that allows for the quenching of the material using liquid nitrogen-cooled substrates. Quenching leads to the controlled formation of metastable phases. The influence of liquid nitrogen cooling on the formation of the metastable phases was studied by X-ray diffraction under a grazing incidence angle of 1°. A significant increase in the amount of the metastable zirconia phase and a more homogeneous composition along the thickness were found compared to the regularly sprayed coatings. All materials were subjected to a thermal treatment for 1 h at 1400 °C to study the evolution of stable phases.