国内商业空间路径系统适老性环境调查

文章针对老龄化背景下，现阶段及未来国内老龄化社会将会具有的特征和可能面临的问题进行研究，对我国城市空间的适老性现状进行调研，分析并总结存在的不足，从老年人心理、生理、行为特征上分析老年人在商业空间中的需求，并依据对老年人需求的调研结果，对目前商业空间中日常设施进行适老性调研分析商业空间中适老性的不足。     

LNG储罐区防液堤的设计探讨

结合工程实例,探讨了LNG储罐区防液堤设计中有效容积和形状的确定、混凝土材料的选择和配置.针对提高防液堤的抗低温和耐高温性能,提出了建议.     

Experimental study on sawdust gasification in a spout–fluid bed reactor

This paper summarizes the experimental results of sawdust gasification in a spout–fluid bed reactor. Three scenarios were investigated in this study. In the base case scenario, a total of 15 experiments consisting of three different flow rates (55, 65 and 75 m³ h^{? 1}) of primary air of each of having five equivalence ratios (ER) (0.35, 0.3, 0.25, 0.2 and 0.15) were conducted. The influence of secondary air in the freeboard and the effect of the recirculation of carryover captured by the cyclone to the reactor's freeboard at an ER of 0.25 were investigated in two other scenarios. Higher heating values of 3.02 and 5.15 MJ Nm^{? 3} were obtained with the ER values of 0.35 and 0.15, respectively, in the base case. However, opposite trend was observed for the tar content in the producer gas. At ER of 0.35, a value of 2.35 g Nm^{? 3} was found compared with 8.4 g Nm^{? 3} at ER of 0.15. The tar content in the producer gas was reduced from 5.63 to 1.53 g Nm^{? 3} when secondary air was supplied in the freeboard due to an increase in temperature. The gasification efficiency was increased from 24.96% at the base case to 36.22% with the recirculation of carryover. Higher heating value of producer gas was found to be 4.2–4.4 MJ Nm^{? 3} in this case. The second law analysis of this process estimated the average exergy efficiency as 35.92% at ER of 0.35 and it increased with increasing ER. The recirculation of carryover not only increased the carbon conversion efficiency but also the exergy efficiency. Copyright © 2010 John Wiley & Sons, Ltd.     

The flame propagation characteristics and detonation parameters of ammonia/oxygen in a large-scale horizontal tube: As a carbon-free fuel and hydrogen-energy carrier

As a carbon-free fuel and a hydrogen-energy carrier, ammonia is a potential candidate for future energy utilization. Therefore, in order to promote the application of ammonia in detonation engines and to evaluate the safety of ammonia related industrial process, DDT experiments for ammonia/oxygen mixtures with different ERs were carried out in a large-scale horizontal tube. Moreover, pressure transducers and self-developed temperature sensors were applied to record the overpressure and the instantaneous flame temperature during DDT process. The results show that the DDT process in ammonia/oxygen mixtures contains four stages: Slow propagation stage, Flame and pressure wave acceleration stage, Fast propagation and detonation wave formation stage, Detonation wave self-sustained propagation stage. For stoichiometric ammonia/oxygen mixtures, flame front and the leading shock wave propagate one after another with different velocity, until they closely coupled and propagated together with one steady velocity. At the same time, it is found that an interesting retonation wave propagates backward. The peak overpressure, detonation velocity, and flame temperature of the self-sustained detonation are 2 MPa, 2000 m/s and 3500 K, respectively. With the ER increased from 0.6 to 1.6, the detonation velocities and peak overpressures ranged from 2310 m/s to 2480 m/s and 25.6 bar–28.7 bar, respectively. In addition, the detonation parameters of ammonia were compared with those of methane and hydrogen to evaluate the detonation performance and destructiveness of ammonia.     

Recent Trends,Applications, and Perspectives in 3D Shape Similarity Assessment

The recent introduction of 3D shape analysis frameworks able to quantify the deformation of a shape into another in terms of the variation of real functions yields a new interpretation of the 3D shape similarity assessment and opens new perspectives. Indeed, while the classical approaches to similarity mainly quantify it as a numerical score, map‐based methods also define (dense) shape correspondences. After presenting in detail the theoretical foundations underlying these approaches, we classify them by looking at their most salient features, including the kind of structure and invariance properties they capture, as well as the distances and the output modalities according to which the similarity between shapes is assessed and returned. We also review the usage of these methods in a number of 3D shape application domains, ranging from matching and retrieval to annotation and segmentation. Finally, the most promising directions for future research developments are discussed.     

A new multi-objective optimization method for master production scheduling problems using simulated annealing

Tactic planning or master production scheduling focuses on time and spatial decomposition of the aggregate planning targets and forecasts, as well as, forecast and provision of needed resources. This process becomes extremely hard and time consuming with the increase of number of products, resources and periods considered. In face of such obstacles, this work shows a study of an Artificial Intelligence technique called Simulated Annealing applied to the optimization of production planning problem, more specifically, Master Production Scheduling. This work reviews some of the fundamental theory of simulated annealing, the methodology for master production scheduling calculation, the applicability of simulating annealing to planning problems, most important results and suggestions for further studies.     

Delivery of cefotaxime to the brain via intranasal administration

The purpose of this study was to investigate the plausibility of delivery of cefotaxime to the brain via intranasal administration. In vitro permeation studies were carried out using Franz diffusion cells, and the effect of different concentrations of chitosan (0.1% w/v and 0.25% w/v) on drug permeation across the bovine olfactory mucosa was determined. Samples were collected from the receiver compartment at different time points and analyzed using HPLC. The amount of cefotaxime that permeated across the olfactory mucosa when 0.25% w/v of chitosan was used as a permeation enhancer was ~1.5- and ~2-fold higher at the end of the first hour and second hour, respectively, over control (29.56?±?6.18 µg/cm²). There was no significant enhancement in drug permeation when 0.1% w/v chitosan was used as the permeation enhancer. Pharmacokinetic studies were carried out using Sprague-Dawley rats. Cefotaxime solution with 0.25% w/v chitosan (40?mg/kg) was administered intravenously (i.v.) to rats in groups 1 and 3 and intranasally to those in group 2 and 4. The time course of drug in the brain was investigated by performing microdialysis in rats of groups 1 and 2. Blood samples were withdrawn from rats in groups 3 and 4, and cefotaxime in plasma was analyzed using HPLC after extraction with a hydrochloric acid–chloroform:1-pentanol (3:1) and phosphate buffer solvent system. Pharmacokinetic parameters were calculated using the trapezoidal rule. The results imply that the drug levels attained in the brain following i.v. and intranasal administrations were comparable. These results suggest that intranasal administration of cefotaxime could be a potential method of delivering antibacterial agents because of it being noninvasive and patient compliant.     

Extended Process to Product Modeling (xPPM) for integrated and seamless IDM and MVD development

This paper proposes a new extended Process to Product Modeling (xPPM) method for integrated and seamless information delivery manual (IDM) and model view definition (MVD) development. Current IDM development typically uses Business Process Modeling Notation (BPMN) to represent a process map (PM). Exchange requirements (ERs) and functional parts (FPs) specify the information required when information is exchanged between different activities. A set of information requirements, specifically defined as a subset of Industry Foundation Classes (IFC), is called an MVD. Currently however, PMs, ERs, FPs, and MVDs are developed as separate documents through independent development steps. Moreover, even though ERs and FPs are designed to be reused, tracking and reusing the ERs and FPs developed by others is practically impossible. The xPPM method is proposed to provide a tight connection between PMs, ERs, FPs, and MVDs and to improve the reusability of predefined ERs and FPs. The theoretical framework is based on the approach of the Georgia Tech Process to Product Modeling (GTPPM) to suit the IDM development process. An xPPM tool is developed, and the validity of xPPM is analyzed through the reproduction of existing IDMs and MVDs. The benefits and limitations of xPPM and lessons from the applicability tests are discussed.     

“万象更新壶”的造型特征、创新路径及装饰寓意解析

“万象更新壶”以“象”的形态为塑形依据，以“还原法”为创新路径，以“琢砂地”的装饰技法寄托“吉”的情缘，整器造型与装饰浑然一体，营造出宽广的审美空间。