汽车空调制冷系统中应用R407C的分析

本文对混合工质R407C与R12的物理和热力性质进行了比较分析，并针对汽车空调制冷系统的特点，对两种工质在变工况下进行了制冷系统的理论循环分析，阐明了在汽车空调制冷系统中使用R407C的可行性。     

The oxidation of two ternary Ni-Cu-10 at.% Al alloys in 1 atm of pure O2 at 800-900 °C

The oxidation of the ternary alloys Ni-45Cu-10Al and Ni-30Cu-10Al has been studied at 800-900 °C under 1 atm O₂. The presence of 10 at.% Al reduces significantly the oxidation rate of the corresponding Cu-Ni alloys during the initial oxidation stages, even before the establishment of a complete Al₂O₃ layer. The weight of individual sample of the two ternary Ni-Cu-10Al alloys at 800 °C increases more rapidly than at 900 °C during the initial oxidation stage. As oxidation proceeds, the weight gain at 800 °C slows down to a degree that the total weight gain after 24 h oxidation at 800 °C is less than that at 900 °C. Due to a faster formation of the Al₂O₃ layer, which suppresses earlier the further oxidation of Cu and Ni, the external region of the scales grown on Ni-45Cu-10Al contain much less Cu and Ni oxides than those grown on Ni-30Cu-10Al. The transition from the internal oxidation to the selective external oxidation of the most reactive component Al in Ni-Cu-Al alloys is favored by higher values of the Al content, of temperature and of the Cu/Ni ratio.     

节能建筑中人体传热模型和计算公式

讨论人体新陈代谢发热率及其影响因素;论述节能建筑中舒适的环境温度、空气相对湿度、空气流速以及新鲜空气供给量的最佳值范围;同时考虑皮肤和肺部的显热散热和蒸发潜热散热,建立了传热模型,得出了计算公式。     

Design of a high-pressure ebulliometer,with vapor-liquid equilibrium results for the systems CHF2 Cl + CF3 CH3 and CF3 CH2 F + CH2F2

We describe the design and operation of a new high-pressure metal ebulliometer which can operate at pressures to at least 3 MPa in the range 220–400 K. Infinite-dilution activity coefficients are presented for the system CHF₂Cl + CF₃-CH, at 275 K and for the system CF₃-CH₂F + CH₂F₂, at 260, 230, and 300 K. The Wilson activity coellicient model and a virial coefficient model are applied to these systems, and the phase equilibrium conditions are calculated. The results are shown to agree well with predicted and with published measured values. The excess enthalpy is calculated and compared with results from a Peng Robinson equation of state. Vapor densities on the dew curves are given.     

Formation Kinetics of Unsaturated (Ti, W)C Solid Solution

ＦｏｒｍａｔｉｏｎＫｉｎｅｔｉｃｓｏｆＵｎｓａｔｕｒａｔｅｄ（Ｔｉ，Ｗ）ＣＳｏｌｉｄＳｏｌｕｔｉｏｎＬｉｎＣｈｅｎ’ｇｕａｎｇ，ＤｅｎｇＦｅｎｇｘｉａｎｇ，ＨｅＣｏｎｇｘｕｎａｎｄＧａｏＺｈａｏｚｕ（林晨光）（邓凤翔）（贺从训）（高兆祖）（Ｇｅｎｅｒ...     

Influence of Drying Conditions on Ascorbic Acid during Convective Drying of Whole Persimmons

Degradation kinetics of food constituents may be related to the matrix molecular mobility by glass transition temperature. Our objective was to test this approach to describe ascorbic acid degradation during drying of persimmons in an automatically controlled tray dryer with temperatures (40 to 70°C) and air velocities (0.8 to 2.0 m/s) varying according a second order central composite design. The Williams-Landel-Ferry model was satisfactorily adjusted to degradation curves for both control strategies adopted—constant air temperature and temperature fixed inside the fruit. Degradation rates were higher at higher drying temperatures, independent of the necessary time to attain the desired moisture content.     

离子液体催化C_5馏分中二烯烃的聚合反应

合成了多种基于1-丁基-3-甲基咪唑阳离子的离子液体,并作为裂解C5馏分中混合二烯烃聚合反应的介质。考察了离子液体种类、反应温度、反应时间和添加Lew is酸对混合二烯烃聚合反应的影响。实验结果表明,以硝酸根为阴离子的离子液体对混合二烯烃的聚合反应具有一定的阻聚作用;以六氟磷酸根为阴离子的离子液体能明显促进混合二烯烃的聚合反应,提高二聚物的含量;添加Lew is酸(质量分数为1%的ZnCl2)的离子液体对混合二烯烃的聚合反应具有更明显的促进作用,其效果仅次于酸性氯铝酸类离子液体,反应温度以30℃以下为宜,温度过高将促使二聚物进一步聚合,形成三聚物乃至多聚物,降低二聚物的含量。     

Passivation and corrosion behaviours of cobalt and cobalt-chromium-molybdenum alloy

Passivation and corrosion behaviour of the cobalt and cobalt-base alloy Co30Cr6Mo was studied in a simulated physiological solution containing chloride and bicarbonate ions and with pH of 6.8. The oxido-reduction processes included solid state transformations occurring at the cobalt/electrolyte interface are interpreted using theories of surface electrochemistry. The dissolution of cobalt is significantly suppressed by alloying it with chromium and molybdenum, since the alloy exhibited “chromium like” passivity. The structural and protective properties of passive oxide films formed spontaneously at the open circuit potential or during the anodic polarization were studied using electrochemical impedance spectroscopy in the wide frequency range.     

活性炭载体的超声波处理对Pt／C催化剂活性的影响分析

通过对活性炭载体进行不同条件的超声波处理获得了具有不同表面化学性质的载体，使用比表面积（BET）、酸碱滴定等技术手段对载体的物理化学性质进行了表征。将经过超声波处理的活性炭载体制备成Pt／C催化剂，并将催化剂直接用于催化反应，考察了活性炭载体的不同超声波处理条件对Pt／C催化剂性能的影响。实验发现，活性炭载体经过超声波处理后，表面灰分含量、pH值和中孔孔容有较大的变化；使用经过60min超声波处理后中孔孔容较大的活性炭作为载体制备的Pt／C催化剂，在催化加氢反应性能测试中显示了最高的催化活性。在此基础上，就活性炭载体的超声波处理对Pt／C催化剂活性的影响进行了讨论。     

I2C总线及其在单片机测控系统中的应用

介绍了I2C总线的基本工作原理和I2C总线串行EEPROM,以及AT24C08A在某单片机控制系统中的应用.经过系统的使用,证明I2C总线的EEPROM能可靠地工作.