关于冷却塔蒸发水量带走热量系数问题

就目前冷却塔热力计算中，不同作者对蒸发水量带走热量系数Ｋ的处理及存在问题进行了分析研究，并提出了自己的见解。     

强夯法在湿陷性黄土加固工程中的应用分析

本文从热电厂的盈亏分析入手，找出了最佳的盈亏平衡点，从而给出热价函数和电价函数，在一定程度上解决了热价制定难的问题。     

大型燃煤锅炉热偏差的试验与数值研究

针对安徽省平圩发电厂 2号炉过热器和再热器的热偏差 ,主要从烟气侧提出改造方案 ,利用数值模拟方法 ,在保留四角切圆燃烧方式优点的前提下 ,提出反复“起旋”、“消旋”的燃烧器喷口布置方式 ,以达到、维持炉内稳定的弱旋状态 ,从而来解决热偏差的问题。     

Growth and optical properties of Er,Yb:YAl3(BO3)4 crystal

Single crystal of erbium, ytterbium-codoped yttrium aluminum tetraborate Er,Yb:YAl₃(BO₃)₄(Er,Yb:YAB) has been grown by the flux method. The absorption spectrum in the visible and NIR regions of Er,Yb:YAl₃(BO₃)₄ crystal are measured at room temperature and fluorescence spectrum of Er,Yb:YAl₃(BO₃)₄ crystal are also measured at room temperature, excited by 976 nm laser. Not only the strong NIR emission peaks located at 1548 nm was observed, but also the visible up-conversion luminescence has been found. The specific heat of the Er/Yb:YAB crystal at room temperature is 0.81 J/g °C.     

以逐步隔离法为基础的系统泄漏率试验经济性回收分析

定性地论述了以逐步隔离法为基础的系统泄漏率试验方法的进行过程及问题处理方法,并以邹县发电厂#1机为例定量地分析由该方法进行试验所回收的经济效益。该方法的提出为电厂节能降耗指出了一个新的方向。     

The Heat Transfer of Streams of Finely Divided Media in Channels Separated by a Permeable Partition

A mathematical model is suggested of convective heat transfer between streams of finely divided media under conditions of flow in the channels of a valve-type pulsating-flow heat exchanger, which are separated by a permeable partition. The heat and mass transfer occurs by way of multiple transverse exchanges of continuous phases between streams when developing sign-variable pressure differences between these streams. The interphase heat transfer in dispersed flows is taken into account, assuming that the particles are isothermal and their temperature is defined by external heat transfer on the particle surface.     

新型滑块在天钢带钢厂加热炉上的应用

针对原来加热炉水梁滑块结构、排列不合理造成的钢坯温度不均现象，改用新型孔洞式全热滑块。实践证明新型滑块设计合理、结构简单、施工方便、使用可靠，有效地提高了加热炉的热效率，减少了水梁黑印，改善了钢加热质量，明显的提高了带钢产量。     

Dissipation of Turbulent Kinetic Energy near a Bubble Plume

Profiles of the rate of dissipation of turbulent kinetic energy were inferred from temperature microstructure measurements near a bubble plume at the center of a tank with diameter of 13.7 m and maximum depth of 8.3 m. Six sets of between 18 and 51 profiles were collected at airflow rates of 0.1–0.6 L/s, measured at atmospheric pressure, and ensemble-averaged dissipation profiles were calculated. The dissipation in all cases was between 10?8 and 10?6?m2/s3 in most of the profile, but it increased sharply near the water surface. Energy considerations are used to discuss the experimental results in terms of previous numerical models of bubble plume turbulence. Two previous numerical studies show that the turbulence dissipates between 15 and 30% of the available power. In the experiments, the fraction is less than 1% because some of the energy of the plume is used to generate waves on the water surface and the profiles used to compute the volume-averaged dissipation were relatively far from the bubble plume.     

基于剪切平面与磨损平面的磨削淬硬热量分配比研究

磨削淬硬技术利用磨削热对工件表层进行表面热处理,磨削热和工件温度场分布均是影响磨削淬硬技术的关键因素,本文基于单颗磨粒对热源产生位置进行了分析,忽略在磨粒与磨屑界面产生的热量,考虑磨屑-工件界面和磨粒-工件界面热源,建立了磨削淬硬热量分配比模型,并利用有限元分析和实验的方法对建立的热量分配比模型进行了验证.     

器外复杂换热的搅拌容器中液体不稳定传热计算

论述了器外复杂换热的搅拌容器中液体不稳定传热计算方法,对几种常见的这类情况进行了算式推导,并举例说明