网上电子银行系统

本文简要介绍网上电子银行系统的基本结构。重点讲述信息传送服务器 ,并给出该系统的设计例。     

Carbon fibre cloth as an electrode material: electrical conductivity and mass transfer

The paper deals with carbon fibre cloth electrodes, employed in the fabrication of composite materials. The electrical conductivity of single bundles, groups of bundles and cloth is studied. Ohm's law applies to the electrical conduction in the direction of the fibre length, but bundle conductivity decreases with the number of fibres in the bundle. Electrochemical mass transfer between a flowing electrolyte and a cloth arranged as a flow-through or a flow-by porous electrode indicates the existence of double porosity in the material. Due to double porosity, only the external surface of the cloth works as an electrode. This finding shows that the material is not suitable for such an application.     

NUMERICAL SIMULATION OF STREAMBED HEAT TRANSFER

１．　ＩＮＴＲＯＤＵＣＴＩＯＮＴｈｅｓｉｍｕｌａｔｉｏｎｏｆｓｔｒｅａｍｗａｔｅｒｔｅｍｐｅｒａｔｕｒｅｉｓｓｉｇｎｉｆｉｃａｎｔｌｙｉｍｐｏｒｔａｎｔｆｏｒｔｈｅｓｔｕｄｙｏｆｎｕｍｅｒｉｃａｌｍｏｄｅｌｉｎｇｏｆｒｉｖｅｒｉｃｅｐｒｏｃｅｓｓｅｓ［１］　．Ｈｉｓｔｏｒｉｃａｌｌｙ，ｔｈｅｍａｔｈｅｍａｔｉｃａｌｍｏｄｅｌｉｎｇｏｆｔｈｅｔｒａｎｓｐｏｒｔａｎｄｆａｔｅｏｆｈｅａｔｉｎａｗａｔｅｒｂｏｄｙｈａｓｂｅｅｎｔｈｅｓｕｂｊｅｃｔｏｆｅｘｔｅｎｓｉｖｅｓｔｕｄｙｆｏｒｖａｒｉｏｕｓｒｅ…     

Optical measurements of thermal diffusivity of a material

The measurement of thermal diffusivity of a material (in particular, a thin film) is important for various reasons, e.g., to predict the heat transfer in the solid subjected to a thermal process, to monitor surface composition or morphology, or to detect invisible subsurface defects like delaminations. This measurement can be done in a noncontact manner using various photothermal methods. Such methods typically involve pulsed heating of the surface by small amounts using a laser source; the decay of the surface temperature after this pulsed photothermal heating is then probed to provide the thermal diffusivity. Various probing methods have been developed in the literature, including the probing of reflection, refraction, and diffraction from the pulsed heated area, infrared thermal radiometry, and surface deformation. This paper provides an overview of such techniques and some examples of their applications.     

提高K-9曲拐质量的热处理工艺

K-9曲拐质量不合格主要是由于热处理后，珠光体数量太少所引起。因此应用正交试验，合理地选择了热处理工艺参数，提高了出炉温度，增加了珠光体数量，解决了K-9曲拐的质量问题。     

淀粉液化液灭酶方法的研究

某些情况下淀粉液化液需要严格控制液化的程度 ,因此需要及时终止残余淀粉酶的活性。实验用降低液化液 pH值、升高温度、以及两者并用等 3种方法结束液化反应过程 ,实验结果可作为工业生产过程参考。     

超越离合器内星轮对数螺旋楔合面的设计

通过对采用平面楔合面内星轮的超越离合器的受力及磨损对其使用可靠性影响的分析，从而提出了用对数螺旋楔合而代替平面楔合面的设计方案，并对两种方案进行了比较。     

Optimization of metal-based multilayers for transparent heat mirrors

Multilayer calculations by conventional matrix methods for dielectricum/noble metal/dielectricum systems on glass have been performed. The aim has been to maximize the integrated parameters for solar transmission, T_sol, and transmission of visible light, T_eye We have found that Ag is superior for maximizing the transmittance over the narrow visible wavelength range owing to the low internal absorptance. When solar energy transmission is considered multilayers based on Au are the best choice for metal film thicknesses above 15 nm. For thinner films, Ag is still to be preferred.     

40Cr钢复合热处理强韧化

用光学及电子显微镜(SEM.TEM)观察不同热处理的40Cr 钢的冲击及断裂韧性断口、及金相组织,阐明其间相互关系;断口结构可反映断裂特征,组织情况;细化晶粒提高强度、塑性和冲击韧性,但却减少脆断的特性距离 l 因而降低 K_(1c)模;减少碳(杂质)偏聚而使其呈较均匀地分布,从而减少可诱发塑坑的较粗大的碳(杂质)化合物的析出,即增加塑坑的间距 di 以及增加塑断组成物。从而都可增加断裂临界应变 ef,都可以提高 K_(1c)40Cr 复合热处理既靠先超高温淬、回火以减少碳(杂质)偏聚,改善其分布,以反增加位错马氏体从而提高 K_(1c),也靠后淬、回火细化晶粒而提高强度、塑性和冲击韧性,各自发挥长处达到强韧化。