Two-step design of critical control systems using disturbance cancellation integral controllers

An efficient critical control system design is proposed in this paper. The key idea is to decompose the design problem into two simpler design steps by the technique used in the classical loop transfer recovery method (LTR). The disturbance cancellation integral controller is used as a basic controller. Since the standard loop transfer recovery method cannot be applied to the disturbance cancellation controller, the nonstandard version recently found is used for the decomposition. Exogenous inputs with constraints both on the amplitude and rate of change are considered. The majorant approach is taken to obtain the analytical sufficient matching conditions. A numerical design example is presented to illustrate the effectiveness of the proposed design.     

Modular analysis and modelling of risk scenarios with dependencies

The risk analysis of critical infrastructures such as the electric power supply or telecommunications is complicated by the fact that such infrastructures are mutually dependent. We propose a modular approach to the modelling and analysis of risk scenarios with dependencies. Our approach may be used to deduce the risk level of an overall system from previous risk analyses of its constituent systems. A custom made assumption-guarantee style is put forward as a means to describe risk scenarios with external dependencies. We also define a set of deduction rules facilitating various kinds of reasoning, including the analysis of mutual dependencies between risk scenarios expressed in the assumption-guarantee style.     

Organic wavelength‐converting‐film‐based hybrid planar white light‐emitting diodes

Abstract— In this study, organic wavelength‐converting films (WCFs) applied to InGaN blue LED‐based hybrid planar WLED has been fabricated. The organic dye layer in the WCF was formed between the upper and bottom polymer sheets by using a simple roll‐laminating technique. Subsequently, the hybrid planar WLEDs have been fabricated based upon these films. The luminous efficiency of green WCF‐based hybrid planar WLEDs with a single blue LED chip was 34.6 lm/W and that of red‐WCF‐assisted green WCF‐based hybrid planar WLEDs was 27.3 lm/W under 20 mA. The use of WCF to fabricate hybrid planar WLEDs showed better stability than that of directly coating organic color‐convergence materials (CCMs) on the LED chips. It only decreased to about 10% of the initial wavelength‐converting intensity after 1 hour of continual operation at 20 mA.     

Sensitivity of guided mode resonance filter-based biosensor in visible and near infrared ranges

The sensitivity of guided mode resonance filter (GMRF) biosensors was analyzed when the initial peak wavelength (IPW) changed from 400 to 1600 nm. The sensitivity of the GMRF to the sample refractive index and thickness was analyzed using rigorous coupled wave analysis method. Results indicate that for a certain IPW, the sensitivity of the GMRF did not change when the sample refractive index varied, but drastically decreased and achieved constant sensitivity with increased sample thickness. When the IPW increased, the sensitivity improved in relation to both sample refractive index and sample thickness. Furthermore, the capability of sample thickness improved with longer IPW. These results are helpful in obtaining an optimal GMRF biosensor.     

基于电磁力的FBG电流传感器研究

利用通电螺线管与永磁铁之间的作用力,提出了一种测量电流的方法.光纤Bragg光栅(FBG)在永磁铁的牵引下发生轴向应变,引起Bragg中心波长的漂移,通过解调中心波长漂移量对电流进行测量.实验中采取多匝数螺线管和小电流来模拟大电流,对0-3A的直流电流进行了测量.实验结果表明:中心波长漂移量与电流有很好的线性关系,线性...     

An integrative approach to requirements analysis: How task models support requirements reuse in a user-centric design framework

Many software systems fail to address their intended purpose because of a lack of user involvement and requirements deficiencies. This paper discusses the elaboration of a requirements-analysis process that integrates a critical-parameter-based approach to task modeling within a user-centric design framework. On one hand, adapting task models to capture requirements bridges the gap between scenarios and critical parameters which benefits design from the standpoint of user involvement and accurate requirements. On the other hand, using task models as a reusable component leverages requirements reuse which benefits design by increasing quality while simultaneously reducing development costs and time-to-market. First, we present the establishment of both a user-centric and reuse-centric requirements process along with its implementation within an integrated design tool suite. Secondly, we report the design, procedures, and findings of two user studies aimed at assessing the feasibility for novice designers to conduct the process as well as evaluating the resulting benefits upon requirements-analysis deliverables, requirements quality, and requirements reuse.     

面向攻击图构建的网络连通性分析

针对目前网络攻击图构建系统的需求,设计网络连通性分析算法。通过对网络拓扑及防火墙规则进行离线分析,可以判断网络中由若干台过滤设备分隔的任意2台主机间的连通性。引入关键实体集的概念,结合经典的Apriori算法提出一种快速有效的获取关键实体集的方法。分析对比表明,关键实体集可以在连通性分析过程中为网络中各节点的重要性评估提供有力依据。     

基于带标记的并发可达标识图的关键路径的求解方法

将AOE 网转换成有色时延Petri网模型,在模型转换过程中同时计算出各位置所对应的事件的最早开始时间,给出了模拟AOE 网的有色时延Petri网模型的带标记的并发可达标识图的构建算法;利用并发可达标识图中的标记序列直接得到关键路径并计算出完成所有活动所需的最短时间。实例与仿真实验结果表明,当AOE网中平均存在3个以上的并发活动时,所提方法执行效率优于传统的求解关键路径的算法,并发活动越多,所提算法效率越高。     

Single‐layered retardation films with negative wavelength dispersion birefringence made from liquid‐crystalline monomers

Organic light‐emitting diode displays have a cathode composed of a layer of highly reflective metal. Reflection of external light from this layer can be suppressed with a broadband quarter‐wave plate. Although various types of quarter‐wave plate retardation films have been prepared by copolymerizing, mixing, or laminating multiple polymers, ideal wavelength dispersion has not been achieved with thin retardation films because of their relatively low birefringence and the complexity of the procedure required manufacturing them. In this study, we developed (i) new liquid‐crystalline monomers with negative wavelength dispersion birefringence that we used to obtain thin, single‐layered retardation films suitable for coating and (ii) retardation films with different molecular alignments. We found that the monomers showed high solubility and high regularity of molecular alignment, with less damage to the substrate and alignment films. We also investigated the wavelength dispersion and thermal stability of the films. We succeeded in developing retardation films that had a homeotropic alignment or a hybrid alignment with negative wavelength dispersion. These alignments can be used to obtain antireflection films with an improved viewing angle for organic light‐emitting diode displays or next‐generation thin displays.     

Development of a 3D HUD using a tunable bandpass filter for wavelength multiplexing

A 3D stereoscopic head‐up display using a tunable bandpass filter to perform left and right image spectral separation is presented. Using a single filter reduces the size and the cost of the head‐up display optical engine and enables each spectral band to be accurately tuned. Experiments performed on the first prototype demonstrate the ability to continuously tune the bandpass frequency on 30‐nm range while keeping a 20‐nm bandwidth. Such a system avoids the use of a bulky and costly rotating wheel and enables the use of holographic optical elements known to be wavelength selective.