Study on the propagation of inlet flow distortion in axial compressor using an integral method

 An integral method is investigated and developed in the current work. The effects of the parameters of inlet distortions on the trend of downstream flow feature in compressor are simulated. Other than the drag-to-lift ratio of the blade and the inlet incidence angle, it is found that the distorted inlet velocity is another essential parameter to control the distortion in propagation. Based on this study, a novel critical distortion line and corresponding critical distortion factor are proposed to express the effect of the two essential inlet parameters on the propagation of distortion, namely, the inlet incidence angle and the distorted inlet velocity. From the viewpoint of compressor efficiency, the propagation of inlet flow distortion is further described by a compressor critical performance and its critical characteristic. The results present a useful physical insight to an axial flow compressor behavior and asymptotic behavior of the propagation of inlet distortion, and confirm the active role of compressor in determining the velocity distribution when compressor responds to an inlet flow distortion. Received: 20 December 2001 / Accepted: 21 August 2002 The authors would like to thank HQ RSAF for permission to publish this work, their financial support and encouragement. The first author wants to acknowledge Prof. Frank Marble of California Institute of Technology, for bringing the problem to the author's attention and for his helpful discussion.     

高非线性光纤及其应用

介绍了各种高非线性光纤的原理，并对其在超连续（SC）脉冲的产生和波长变换上的应用作了讨论。     

光通信技术讲座--(五):WDM系统光节点器件

介绍WDM系统光节点所用到的器件,如波长转换器、光分插复用器及其使用的光隔离器和光环形器.     

用于泵浦固体激光器的激光二极管线阵的输出特性

从实验上测量了激光二极管线阵的输出特性,研究了温度、电流对输出功率、光谱特性,以及偏振特性的影响,为设计全固态激光器提供有益的参考。     

Spatiotemporal aspects of jerky flow in Al–Mg alloys, in relation with the Mg content

The spatiotemporal aspects of the Portevin–Le Chatelier effect in Al–Mg alloys are investigated using direct observations of the sample surface with a digital camera. Optical measurements of the surface profile using a white light interferometer allow the estimation of the local strain and strain rate associated with the bands. The effect of Mg content on instability characteristics is analyzed. The reloading time is shown to depend on the Mg content only at the strain and strain rates where type C bands are observed.     

用SY87721实现城域网波分复用系统的多业务接入

为了使城域网的DWDM（密集波分复用）系统可以接入多种信号速率和格式，以满足用户的要求，首先介绍了一种波长转换板的设计方法，使用SY87721自适应提取28Mbit／s～2.7Gbit/s之间任意速率信号的时钟，其次介绍了SY87721提取时钟的工作原理、与单片机和CPLD（复杂可编程逻辑器件）的接口方式、对寄存器的配置和读出方式。最后介绍了使用参考时钟测量接入信号频率的方法，这会在系统维护时带来较大的方便。     

两种含水炸药动压下减敏作用的实验研究

用实验方法对两种含水炸药—水胶炸药和珍珠岩敏化的乳化炸药动压下的减敏作用进行了研究。为了更全面深入地研究这问题,提出了临界压死距离和临界距离两个概念。研究表明,含水炸药的减敏作用与药包间距和延期时差关系很大。水胶炸药的临界压死距离大于乳化炸药,而它们的临界距离相当,这表明两种炸药发生减敏的难易程度相近,但是乳化炸药的抗压死能力比水胶炸药大。采用5段延期电雷管引爆时两种含水炸药的减敏作用比采用2段延期电雷管引爆严重些。     

CRITICAL POINTS IN THE SOLIDIFICATION OF A PURE MATERIAL

Patterns in the solidification of a pure material are dealt with in this article. Results, deduced from a simple model based on heat conduction in the two phases and the effect of surface tension on the equilibrium temperature at the moving front, present a guide for experimental work. By introducing far-field conditions imitating what can be achieved in an experiment, we explain how the depths of the phases and the width of the container influence the patterns that can be seen if one advances the control variable to the critical point and then just beyond. Our new result is the existence of a third critical point. It occurs at small wave numbers and it is independent of surface tension. It appears because we take the depths of the phases into account. These depths are input values that offer the possibility of controlling crest-to-trough conduction, stabilizing in the solid, destabilizing in the liquid. The new critical point, and the patterns attending its appearance, can be found in cells of easily attainable widths.     

Analytical prediction of composite beams response in fire situations

In this paper an extension of the method of the Fourier series expansion to the fire analysis of composite beams is presented. In particular the extension concerns the introduction of the temperature dependent interaction of all the components: steel beams, concrete slab and steel connectors. These last are considered of finite stiffness, and a proper account is given to the combined effect of thermal degradation of the properties, and stress amplification caused by the differential thermal expansion across the interface.The proposed method compares very well with some experimental fire tests of simply supported and framed composite beams. Due to its relative simplicity and speed, it can be used for design purposes in evaluating the critical temperature in terms of critical deflection. Finally we recall that the method is capable of dealing with every type of fastening distribution, such as discontinuous or variable length.     

Study on a Distributed Wavelength Routing Algorithm in WDM Optical Transport Networks

A new design scheme for a distributed algorithm for routing and wavelength assignment (RWA) is developed in this paper, and the communication rules between the nodes to exchange signaling packets are discussed. The Adaptive-Alternate-Routing-Least-Load (AARLL) algorithm is implemented in the distributed scheme for the first time. Under dynamic traffic circumstances, the influence of the race condition, which does not exist in centralized scheme, on the network performance is analyzed and the analyzed results show that the race condition has a major impact on network performance only under light traffic load, while under medium and heavy traffic load the impact is very small. To analyze the performance loss caused by adopting the distributed algorithm for RWA, the capacity loss factor (CLF) is introduced and the calculated results show that CLF does not exceed 6% under medium traffic load.