CH_4－CO_2转化反应载体对负载型Ni催化剂抗积炭性能的影响

用固定床流动反应装置考察了负载于不同载体上的催化剂的活性和抗积炭性能；用色谱法测定了催化剂上的积炭量。用ＴＰＤ和ＸＰＳ研究了催化剂的表面酸碱性。并与催化剂的抗积炭性能相关联。发现用ＳｉＯ２作载体的催化剂抗积炭性能差，在其中加入碱土金属助剂有利于抗积炭，以α－Ａｌ２Ｏ３作载体的催化剂抗积炭性能较好，但在其中加入碱土金属助剂却会导致催化剂严重粉化，反而对抗积炭不利。并讨论了催化剂粉化的原因。     

Colloid Transport through Natural Filter Media

In this project the use of natural media filtration (NMF) was evaluated for its ability to remove colloidal particles from the aqueous phase as a function of ionic strength and filter media type by determining first-order kinetic deposition rate coefficients. Mushroom compost (MC) and leaf compost (LC) were tested as natural filter media and the results were compared to those obtained using sand and granular activated carbon (GAC). The highest deposition rate coefficients were observed for GAC, followed by LC and MC, and the lowest deposition rate coefficients were found for sand. As predicted by the Derjaguin–Landau–Verwey–Overbeek theory, higher deposition rates were obtained at higher solution ionic strengths. Overall the experiments suggest that the NMF process can efficiently remove colloidal particles from surface waters.     

Hot wire chemical vapor deposition: limits and opportunities of protecting the tungsten catalyzer from silicide with a cavity

Hot Wire Chemical Vapor Deposition (HW-CVD) is one of the most promising techniques for depositing the intrinsic microcrystalline silicon layer for the production of micro-morph solar cells. However, the silicide formation at the colder ends of the tungsten wire drastically reduces the lifetime of the catalyzer, thus limiting its industrial exploitation. A simple but interesting strategy to decrease the silicide formation is to hide the electrical contacts of the catalyzer in a long narrow cavity which reduces the probability of the silane molecules to reach the colder ends of the wire. In this paper, the working mechanism of the cavity is elucidated. Measurements of the thickness profile of the silicon deposited in the internal walls of the cavity have been compared with those predicted using a simple diffusion model based on the assumption of Knudsen flow. A lifetime study of the protected and unprotected wires has been carried out. The different mechanisms which determine the deterioration of the catalyzer have been identified and discussed.     

Electrolytic deposition of magnesium-substituted hydroxyapatite crystals on titanium substrate

Electrolytic deposition of magnesium-substituted hydroxyapatite (Mg-HAp) coatings on titanium was investigated and Mg-HAp crystals with up to 2 wt.% Mg²⁺ were deposited in electrolytes with various Mg²⁺ concentration. The incorporation of Mg substantially changed the morphology of the HAp crystals and decreased the crystal size and crystallinity of the HAp. The similarity with natural dentin and bone in composition and the increased specific surface of the Mg-HAp coatings on the Ti substrates were believed to benefit the bioactivity and the drug-carrying properties of the coatings.     

Experimental investigation on the combustion behaviour of pre-dried Greek lignite

The present paper includes the results of the combustion tests with Greek dried lignite performed at a 1 MWth semi industrial scale pulverized coal combustion facility. Scope of the campaign is the investigation of the combustion behaviour of Greek lignite, i.e. temperature fields, ignition, burnout, emissions, as well as slagging and fouling tendency, while firing with varying levels of recirculated flue gas. Dry coal co-firing conditions in a large scale boiler are simulated by adjusting the volume flow of recirculated flue gas.Two test series representing different boiler operation modes are performed. During the first series the maximum flue gas temperature increase, when co-firing dry coal, is determined, while in the second test series the needed load decrease, in order to keep constant furnace outlet temperature in dry coal co-firing conditions is recorded. A detailed measurement set is carried out including temperature profiles, emissions, fuel, fly ash sampling and slagging and fouling investigations through the installation of dedicated deposition probes.The anticipated increase of the furnace temperature profiles by decreasing the inserted recirculated flue gas is confirmed by the experimental results. No clear trend of dry coal co-combustion on the emissions' behaviour is noticed, while dry coal firing appears to have a moderate effect on the deposition behaviour of Greek lignite. These preliminary investigations indicate that no significant operational problems are expected during a potential future demonstration of dry lignite co-firing in a Greek large scale boiler.     

ZnO layers grown by Atomic Layer Deposition: A new material for transparent conductive oxide

We demonstrate possibility of a control (by selection of zinc precursors and variation of a growth temperature) of electrical properties of ZnO films grown by Atomic Layer Deposition (ALD). ZnO films grown by ALD are used in test photovoltaic devices (solar cells) as transparent conductive oxides for upper, transparent layer in inorganic and organic solar cells, and as n-type partners of p-type CdTe.     

Directly ultraviolet photochemical deposition of silver nanoparticles on silica spheres: Preparation and characterization

A simple method was developed to directly deposit silver nanoparticles on the surface of silica spheres. The photochemical reduction was carried out by ultraviolet irradiation in air atmosphere at room temperature. The [Ag(NH₃)₂]⁺was reduced to silver atoms upon ultraviolet irradiation. Silver atoms subsequently deposited on the surface of silica spheres and agglomerated into silver nanoparticles. Silica spheres with silver nanoparticles of different size and density can be simply controlled by adjusting the UV-light irradiation time. The silver nanoparticles deposited on silica spheres were characterized by X-ray photoelectron spectroscopy, X-ray diffraction, transmission electron microscopy, and field emission scanning electron microscopy.     

Thermodynamic and experimental study of chemical bath deposition of Zn(S,O,OH) buffer layers in basic aqueous ammonia solutions. Cell results with electrodeposited CuIn(S,Se)2 absorbers

This paper presents a thermodynamic study of Chemical Bath Deposition (CBD) of zinc sulphide based films in aqueous ammonia solutions. The aim is a better understanding of ammonia and temperature effects on the deposition conditions and films composition. The formation of solid phases has been predicted by means of the precipitation conditions of ZnO, Zn(OH)₂ and ZnS as a function of temperature between 298 and 333 K. Films have been deposited according to calculated diagrams and preliminary results on solar cells based on electrodeposited CuIn(S,Se)₂ layers have been demonstrated. Composition and thickness of the films have been extracted to link the theoretical study with experiments.     

ION REDISTRIBUTION NEAR THE POLAR GROUPS IN THE LANGMUIR WETTING PROCESS

The theoretical analysis of electrostatic interactions and ion redistribution in the close vicinity of the three-phase contact line shows their important role in the Langmuir wetting process. To provide a sufficient rate for the ion transfer, which is intended to neutralize the interfacial charge, the concentration and potential distributions deviate from the equilibrium. As a consequence, during the deposition process the adhesion work, and hence the contact angle, are defined by the local ionic concentrations near the three-phase contact line. The concentration profiles and the electro-diffusion ion fluxes induced during the Langmuir wetting process are strongly dependent on the subphase composition and on the monolayer properties. The results of the analysis are in a good agreement with the experiments.     

圆柱形平面式磁控溅射靶的特点与设计原理

介绍了一种根矩形平面靶的结构原理圆柱形,平面式磁控溅靶的方法,并对如何发挥圆柱形、平面式磁控溅射靶的优点进行了分析。