Vero细胞在微载体上迁移和多层生长现象

本文通过对电子显微镜观察了Ｖｅｒｏ细胞有微载体增减过程中的迁移民政部发现在不同增减阶段，Ｖｒｏ细胞迁移方式不同；在分泌形成的细胞外基质，上，Ｖｅｒｏ细胞迁移是通过 层粘连蛋白介导进行的，被层粘连蛋白抗体抑制；这种迁移导致Ｖｅｒｏ细胞在微载体上形成多层生长现象。     

汽车燃料质量发展新趋势

从现在到21世纪初,汽车燃料质量主要按照减少排气污染的思路来设计。汽油和柴油的发展趋势是:低硫、低芳烃、低90％馏出温度和高清净性。     

一种低压低功耗SRAM/SOI单元设计

提出一种改进4管自体偏压结构SRAM/SOI单元.基于TSUPREM4和MEDICI软件的模拟和结构性能的分析,设计单元结构并选取结构参数.该结构采用nMOS栅下的含p+埋沟的衬底体电阻代替传统6管CMOSSRAM单元中的pMOS元件,具有面积小、工艺简单的优点.该结构可以在0.5V的电源电压下正常工作,与6管单元相比,该单元瞬态响应正常,功耗只有6管单元的1/10,满足低压低功耗的要求.     

Charge transfer resistance of spray deposited and compressed counter electrodes for dye-sensitized nanoparticle solar cells on plastic substrates

Electrochemical impedance spectroscopy was used to determine the effective charge transfer resistances of porous dye-sensitized solar cell counter electrodes prepared by low-temperature spray deposition and compression of conductive carbon and platinized Sb-doped SnO₂ powders on indium tin oxide-coated plastic substrates. The charge transfer resistances were 0.5–2 and 8–13 Ω cm², respectively, when using 3-methoxypropionitrile as the electrolyte solvent. The manufacturing method used lends itself to produce mechanically stable and even-quality electrodes in an easy and fast manner.     

Promising alloys for intermediate-temperature solid oxide fuel cell interconnect application

The formation of a low Cr-volatility and electrically conductive oxide outer layer atop an inner chromia layer via thermal oxidation is highly desirable for preventing chromium evaporation from solid oxide fuel cell (SOFC) metallic interconnects at the SOFC operation temperatures. In this paper, a number of ferritic Fe–22Cr alloys with different levels of Mn and Ti as well as a Ni-based alloy Haynes 242 were cyclically oxidized in air at 800 °C for twenty 100-h cycles. No oxide scale spallation was observed during thermal cycling for any of these alloys. A mixed Mn₂O₃/TiO₂ surface layer and/or a (Mn, Cr)₃O₄ spinel outer layer atop a Cr₂O₃ inner layer was formed for the Fe–22Cr series alloys, while an NiO outer layer with a Cr₂O₃ inner layer was developed for Haynes 242 after cyclic oxidation. For the Fe–22Cr series alloys, the effects of Mn and Ti contents as well as alloy purity on the oxidation resistance and scale area specific resistance were evaluated. The performance of the ferritic alloys was compared with that of Haynes 242. The mismatch in thermal expansion coefficient between the different layers in the oxide scale was identified as a potential concern for these otherwise promising alloys.     

Procedure for Measuring Low Concentrations of H2 and H2S Above a Water Surface

A simple measuring procedure for low concentrations of H₂ and H₂S (at the level of ppm fractions) above the surface of water by using sensitive gas analyzers is suggested. The procedure is easily accomplished in conditions outside the laboratory (under field conditions).     

An extension of the Secant Method for the homogenization of the nonlinear behavior of composite materials

We discuss the consequences of a different application of the principle the Modified Secant Method is [C. R. Acad. Sci. Paris Sér. IIb 320 (1995) 563] based on. In fact, we directly compute the second-order averages of the local fields available from the linear elastic homogenization procedure exploited in order to evaluate the effective elastic moduli. This method, which can be seen either as a simplification of the Modified Secant Method or as an extension of the Secant Method [J. Mech. Phys. Solids 26 (1979) 325], may be useful for any composite whose overall elastic constants need to be estimated by modeling the microstructure through Morphologically Representative Patterns [J. Mech. Phys. Solids 44 (1996) 307], which is for instance the case of syntactic foams [Int. J. Solids and Structures 38/40-41 (2001) 7235]. In order to show the accuracy of the proposed method, we apply it to several examples and compare its results with those obtainable by means of other analytical methods available in the literature, with numerical results of Finite Element simulations, and with experimental results. Closed-form solutions are derived for the effective yield stress of porous metals and incompressible composites reinforced with rigid spheres.     

The 'Conceptual Change In Science' project

Abstract This paper outlines the work of the Conceptual Change in Science project, funded as part of the ESRC InTER programme. The aims of this research project are to clarify and describe the process of change in learners' conceptual understandings of natural phenomena. The domain of reasoning selected for study is that of mechanics. Computer software which may be useful in exploring and developing pupils' reasoning and promoting conceptual change in this domain is being developed and evaluated. The group that is carrying out the research is based at the Universities of Leeds, Glasgow and the Open University.     

聚乙烯醇膜的阻醇及导电性能(Ⅱ)戊二醛交联聚乙烯醇膜

为提高直接甲醇燃料电池(DMFC)用膜的阻醇性能，采用在渗透蒸发领域广泛使用且具有良好分离效果的聚乙烯醇(PVA)为主要材料，制备了戊二醛(GA)交联PVA膜，考察了此类膜的阻醇及质子导电能力。PVA(GA)膜的阻醇效果较目前在DMFC中广泛使用的Nation膜有显著提高，但其自身不具有质子导电能力，需外加电解质溶液以提高其电导率。