Activation of hydrogen storage materials in the Li–Mg–N–H system: Effect on storage properties

We investigate the thermodynamics, kinetics, and capacity of the hydrogen storage reaction: Li₂Mg(NH)₂ + 2H₂  Mg(NH₂)₂ + 2LiH. Starting with LiNH₂ and MgH₂, two distinct procedures have been previously proposed for activating samples to induce the reversible storage reaction. We clarify here the impact of these two activation procedures on the resulting capacity for the Li–Mg–N–H reaction. Additionally, we measure the temperature-dependent kinetic absorption data for this hydrogen storage system. Finally, our experiments confirm the previously reported formation enthalpy (ΔH), hydrogen capacity, and pressure–composition–isotherm (PCI) data, and suggest that this system represents a kinetically (but not thermodynamically) limited system for vehicular on-board storage applications.     

Efficient photodegradation of phenol assisted by persulfate under visible light irradiation via a nitrogen-doped titanium-carbon composite

To realize the utilization of visible light and improve the photocatalytic efficiency of organic pollutant degradation in wastewater, a nitrogen-doped titanium-carbon composite (N-TiO₂/AC) prepared by sol-gel methods was applied in the photodegradation of phenol assisted by persulfate under visible light irradiation (named N-TiO₂/AC/PS/VIS). The results show that a synergistic effect exists between visible-light photocatalysis and persulfate activation. Compared with TiO₂/PS/VIS, the phenol degradation rate was found to be observably improved by 65% in the N-TiO₂/AC/PS/VIS system. This significant increase in degradation rate was mainly attributed to the following two factors: 1) The N and C doping can change the crystal structure of TiO₂, which extends the TiO₂ absorption wavelength range to the visible light region. 2) As an electron acceptor, PS can not only prevent electrons and holes from recombining with each other but can also generate strong oxidizing radicals such as ∙SO₄^– and ∙OH to accelerate the reaction dynamics. The process of phenol degradation was found to be consistent with the Langmuir pseudo-first-order kinetic model with an apparent rate constant k of 1.73 min^–1. The N-TiO₂/AC/PS/VIS process was proven to be a facile method for pollutant degradation with high pH adaptability, excellent visible-light utilization and good application prospects.     

Corrosion inhibition of carbon steel in hydrochloric acid by cationic arylthiophenes as new eco-friendly inhibitors: Experimental and quantum chemical study

This study describes the adsorption behavior of three arylthiophene derivatives namely: 2-(4-amidino-3-fluorophenyl)-5-[4-methoxy phenyl] thiophene dihydrochloride salt (MA-1217), 2-(4-amidinophenyl)-5-[4-chlorophenyl] thiophene dihydrochloride salt (MA-1316) and 2-(4-amidino-3-fluorophenyl)-5-[4-chlorophenyl]thiophene dihydrochloride salt (MA-1312) at C-steel in 1.0 mol·L^-1 HCl interface using experimental and theoretical studies. Electrochemical and mass loss measurements showed that the inhibition efficiency (IE) of the arylthiophene derivatives increases with increasing concentrations and exhibited maximum efficiency 89% at 21×10^-6 mol·L^-1 (MA-1217) by mass loss method. The investigated arylthiophene derivatives obey the Langmuir adsorption isotherm. From polarization studies the arylthiophene derivatives act as mixed-type inhibitors. Surface analysis were carried out and discussed. The mode of orientation and adsorption of inhibitor molecules on C-steel surface was studied using molecular dynamics (MD) simulations. Quantum chemical parameters as well as the radial distribution function indices and binding energies confirm the experimental results.     

The dynamic evolution of aggregated lithium dendrites in lithium metal batteries

Lithium (Li) metal anodes promise an ultrahigh theoretical energy density and low redox potential,thus being the critical energy material for next-generation batteries.Unfortunately,the formation of Li den-drites in Li metal anodes remarkably hinders the practical applications of Li metal anodes.Herein,the dynamic evolution of discrete Li dendrites and aggregated Li dendrites with increasing current densities is visualized by in-situ optical microscopy in conjunction with ex-situ scanning electron microscopy.As revealed by the phase field simulations,the formation of aggregated Li dendrites under high current den-sity is attributed to the locally concentrated electric field rather than the depletion of Li ions.More specif-ically,the locally concentrated electric field stems from the spatial inhomogeneity on the Li metal surface and will be further enhanced with increasing current densities.Adjusting the above two factors with the help of the constructed phase field model is able to regulate the electrodeposited morphology from aggregated Li dendrites to discrete Li dendrites,and ultimately columnar Li morphology.The methodol-ogy and mechanistic understanding established herein give a significant step toward the practical appli-cations of Li metal anodes.     

丁腈橡胶硫化反应动力学研究

设计了促进剂A 4种不同用量的丁腈橡胶配方;基于配方,先利用密炼机将丁腈橡胶、硬脂酸和ZnO混炼,再利用开炼机加入硫黄、促进剂和防老剂,再利用无转子硫化仪分别测试了160℃、170℃和180℃下胶料硫化曲线;基于硫化曲线计算出了每组配方胶料硫化反应速率常数K和活化能Ea。结果表明,在焦烧期时,NBR硫化反应为非一级反应,真正的一级反应开始于硫化速率达到最大时,即tdis;焦烧期后的反应可分为2个阶段且遵循一级动力学反应规律。     

Transcriptomic Profiles of CD47 in Breast Tumors Predict Outcome and Are Associated with Immune Activation

Targeting the innate immune system has attracted attention with the development of anti- CD47 antibodies. Anti-CD47 antibodies block the inhibition of the phagocytic activity of macrophages caused by the up-regulation of CD47 on tumor cells. In this study, public genomic data was used to identify genes highly expressed in breast tumors with elevated CD47 expression and analyzed the association between the presence of tumor immune infiltrates and the expression of the selected genes. We found that 142 genes positively correlated with CD47, of which 83 predicted favorable and 32 detrimental relapse-free survival (RFS). From those associated with favorable RFS, we selected the genes with immunologic biological functions and defined a CD47-immune signature composed of PTPRC, HLA-E, TGFBR2, PTGER4, ETS1, and OPTN. In the basal-like and HER2+ breast cancer subtypes, the expression of the CD47-immune signature predicted favorable outcome, correlated with the presence of tumor immune infiltrates, and with gene expression signatures of T cell activation. Moreover, CD47 up-regulated genes associated with favorable survival correlated with pro-tumoral macrophages. In summary, we described a CD47-immune gene signature composed of 6 genes associated with favorable prognosis, T cell activation, and pro-tumoral macrophages in breast cancer tumors expressing high levels of CD47.     

粉煤灰的活性激发与机理研究进展

粉煤灰是燃煤电厂中煤粉燃烧后的固体废弃物,其日益累积不但会占用大量土地资源,还会破坏原有的自然环境,造成严重污染,近年来粉煤灰的处理和资源化利用受到广泛关注。激发粉煤灰的潜在活性是提高粉煤灰综合利用率的关键。对粉煤灰的物理活性和化学活性来源进行了介绍,并对粉煤灰活性的物理激发、水热激发及化学激发技术与激发机理进行了综述,为后续粉煤灰的活化研究和大规模利用提供了参考。不同手段均能激发粉煤灰活性,但采用单一手段激发时存在活化成本高、激发程度低等问题。未来粉煤灰激发技术将朝着多种手段并用的方向发展。     

Studying the formation process of chromate conversion coatings on aluminium using continuous electrochemical noise resistance measurements

A unique electrochemical technique, namely continuous noise resistance calculation (CNRC), was used to obtain electrochemical kinetic information from the formation process of chromate conversion coatings (CCC) on aluminium electrodes. It was found that the noise resistance (R_n) of aluminium electrodes remained almost unchanged during electrodes' immersion in a chromate containing acidic solution where the CCC films were supposed to form rapidly. This result indicates that the formation of CCC was associated with continuous corrosion of the aluminium electrodes and that the CCC films formed on aluminium surface were not intact barrier films, but most likely porous layers. The CCCs became protective only after they were aged in the environment. Based on these findings, the formation and inhibition mechanisms of CCC have been discussed.     

机械活化-湿化学合成LiMn2O4的组成、结构与表征

以MnO2和LiOH·H2O为原料,采用机械活化与湿化学集成的方法,在水溶液中直接合成了结晶态的尖晶石锂锰氧化物.当锂含量介于3.78%～4.35%之间时,所得锂锰氧化物为纳米级球形粉末,以尖晶石结构为主,含极少量的Mn3O4杂相;在300～800℃温度范围内热处理后,Mn3O4杂相消失,尖晶石结构更趋完善.所合成的含锂5.80%的高锂样品则以LiMnO2层状结构为主,含少量Mn3O4杂相,其SEM形貌为片状;在300～700℃下热处理8 h后,层状LiMnO2转变成尖晶石LiMn2O4,Mn3O4杂相峰明显减弱并随热处理温度的升高而消失;当温度升高至700～800℃时,开始出现缺锂的Li1-xMn2O4相.结果表明:该法制备锂锰氧化物可实现锂、锰、氧在原子级水平的均匀混合,所得产物的热稳定性能良好,其化学计量组成与结构易于调整和控制.     

机械活化条件下超细铁矿粉氢基还原特性及机制

摘要：通过热重法研究了不同机械活化程度的铁矿粉氢基还原特性,并分析和探讨了其还原反应机制。实验结果表明,机械活化对氢气还原铁矿粉有促进作用,机械活化时间越长,还原特征温度越低,还原反应所需的活化能也越低,但反应机制未发生变化,反应的限制性环节是其界面反应。机械活化明显影响到超细铁矿粉的逐级反应,对于未经活化的铁矿粉而言,逐级反应层次极不明显,而对于活化后铁矿粉的逐级反应层次随着活化时间的增加越发分明。