Reliable synthesis of bismuth nanoparticles for heavy metal detection

A reliable and facile pathway is described here for preparing high-quality bismuth nanoparticles. Combined with hydrothermal method and confined growing effect of polymer, bismuth nanoparticles with uniform size and shape were obtained with remarkable productivity. The nanoparticles is proved to be pure Rhombohedral structure Bi crystals with R-3m space group and the diameter of the nanoparticles is about 80 nm with a quite narrow particle size distribution. Those bismuth nanoparticles were predicted to grow from a rolling process by sheet-like Bi nanocrystal intermediates. The obtained bismuth nanoparticles were used to prepare modified electrode for the detection of Cd²⁺ and Pb²⁺ in water solution by stripping analysis. Compared with naked glassy carbon electrodes, the modified electrode showed two obvious responses at −0.85 V and −0.62 V, corresponding to the reduction process of Pb²⁺ and Cd²⁺ and this well-resolved stripping response can be observed when the concentration is as low as 10 μg/L, indicating potential application in electroanalysis for environmental inspection.     

L—半胱氨酸盐酸盐电化学生产工艺的工业化研究

就Ｌ－半胱氨酸盐酸电化学生产工艺的工业化进行了讨论，并分布了工业化实验一些研究成果。     

Synthesis of WSi2 -SiC composite under the thermally activated combustion mode

Opportunities on combustion synthesizing the WSi2-SiC ceramic composites in a wide range of compositions under the thermal activated mode were studied. Tungsten, silicon powders and carbon black were used as initial reagents, and Magnesium–Teflon mixture was used as an activating additive. The stepwise character of the combustion process evolution, being characterized by low- and high-temperature regimes, was revealed. The end-products were subjected to SEM, XRD and DTA/TG analyses.     

The effect of ionic liquids with imidazolium and pyridinium cations on the corrosion inhibition of mild steel in acidic environment

Ionic liquids with chemical formula 1,3-dioctadecylimidazolium bromide and N-Octadecylpyridinium bromide were synthesized by conventional and microwave-assisted reactions, respectively. Ionic liquids tested as corrosion inhibitors after polarization curves displayed corrosion protection efficiency within 82-88% at 100 ppm for mild steel in a 1 M aqueous solution of sulfuric acid. Standard free energy indicated that corrosion inhibition occurred by a chemical adsorption process. Surface analysis (SEM, EDX) completed by XRD and Mössbauer spectroscopy indicated the presence of carbon species pertaining to inhibitor and corrosion products, which was rationalized in an inhibition mechanism.     

怎样用SDA5000型数字电视分析仪测试双向放大器的反向插入损耗

介绍了SDA5000数字电视分析仪和漳州广电双向网络的改造方案,并简单地阐述了双向放大器的概念。介绍了SDA5000数字电视分析仪3个接口的作用,结合实际案例说明怎样用SDA5000数字电视分析仪测试双向放大器的插入损耗。     

Asymmetric capacitor based on superior porous Ni-Zn-Co oxide/hydroxide and carbon electrodes

Hierarchical porous multi-phase Ni-Zn-Co oxide/hydroxide is synthesized by using metal-organic framework-5 (MOF-5) as the template. Hierarchical porous carbon is obtained by the facile direct decomposition of the MOF-5 framework with phenolic resin. The structures and textures are characterized by X-ray diffraction, high-resolution transmission electron microscopy, scanning electron microscopy, and nitrogen sorption at 77 K. An asymmetric capacitor incorporating the Ni-Zn-Co oxide/hydroxide as the positive electrode and the porous carbon as the negative electrode is fabricated. A maximum energy density of 41.65 Wh kg⁻¹ is obtained, which outperforms many other available asymmetric capacitors. The asymmetric capacitor also shows a good high-rate performance, possessing an energy density of 16.62 Wh kg⁻¹ at the power density of about 2900 W kg⁻¹.     

High rate capability of carbonaceous composites as anode electrodes for lithium-ion secondary battery

Anode materials with high rate capability for Li-ion secondary batteries were investigated by using the mixture of graphite, cokes, and petroleum pitch. Since obvious potential plateaus were obtained at graphite contents above 40 wt.%, which would cause difficulties in perceiving the capacity variations as a function of electrical potential, the graphite content were determined at 20–30 wt.%. The composites with a given content of graphite and remaining content of petroleum pitch/cokes mixtures at 1:4, 1:1, and 4:1 mass ratios were heated at a temperature range of 800–1200 °C. For a given composition of carbonaceous composite, the discharge rate capability improved but the reversible capacity decreased with increasing the heat treatment temperature. Although the reversible capacity increased with increasing content of the petroleum pitch for given graphite content and heat treatment temperature, the discharge rate capability decreased. The carbonaceous composites prepared by the mixture of 30 wt.% graphite and 70 wt.% petroleum pitch/cokes mixture at 1:4 mass ratio with the heat treatment at 800 °C showed relatively high electrochemical properties, of which reversible capacity, initial efficiency, discharge rate capability (retention of discharge capacity in 5 C/0.2 C) and charge capacity at 5 C were 312 mAh/g, 79%, 89% and 78 mAh/g, respectively.     

Electrochemical studies of the inhibition of the cathodic delamination of organically coated galvanised steel by thin conversion films

Scanning Kelvin Probe (SKP) measurements of thin amorphous conversion film coated galvanised steel in combination with current density-potential curves and electrochemical impedance spectroscopy (EIS) were performed with the aim to improve the understanding of electrode potentials at the coating/metal interface and their influence on corrosive de-adhesion. The thin hybrid conversion films contained Zn-phosphates, titanates and also complexing organic compounds and led to an inhibition of the cathodic oxygen reduction and anodic zinc dissolution. In the polymer coated area the conversion film leads to a cathodic shift of the potential as measured by means of the SKP. This cathodic potential shift is explained by the substitution of the n-semiconducting Zn-oxide with an insulating inorganic layer. When the SKP detects the potential of freely corroding iron at a defect, where no protective coating layer is, the interfacial potential for the conversion film coated zinc layer is more negative than the defect potential. This leads to a diminished driving force for an oxygen reduction induced delamination process which is of relevance for the understanding of cut-edge corrosion.     

Evaluation of microbially influenced corrosion with electrochemical noise analysis and signal processing

Corrosion behaviors of stainless steel (SS304), with attached Acidithiobacilus ferrooxidans (ATF) bacteria and exposed to three different types of artificial saliva solutions, namely: (1) Jenkin's solution, (2) Tomasi's solution, and (3) NaCl solution, have been monitored using electrochemical noise (ECN) analysis and signal processing techniques. The ECN data has been analyzed in time and frequency domains, and the time-domain analysis was used to calculate parameters such as skewness, kurtosis and noise resistance, R_n. The corrosion mechanisms were analyzed in terms of the ranges of skewness and kurtosis. The frequency analysis showed that the conventional fast Fourier transforms (FFT) method failed to differentiate among the ECN signals obtained in different solutions with and without the attachment of bacteria. Therefore, the fractional Fourier transform (FrFT) was introduced to process ECN signals and has been demonstrated as a better tool to describe the corrosion behaviors of electrodes in different solutions.     

DNA promotes the activation of oxygen molecules by binuclear cobalt(II) compounds

We have observed that binuclear cobalt(II) compounds with H(HPTP), Co₂(HPTP)(CH₃COO)(ClO₄)₂ and Co₂(HPTP)Cl(ClO₄)₂, react with oxygen molecules when DNA is present in the solution, cleaving the DNA (H(HPTP) denotes N,N,N′,N′-tetrakis(2-pyridylmethyl)-1,3-diaminopropane-2- ol).