基于环保的广告机概念设计

广告机这一产品通过视频、音频的形式向公众传达信息,其主要使用环境为公共场合。在广告机概念设计上。不仅注重外观的时尚和简洁,有时为了向人们传达环保的理念,特别在广告机面板下方的广告单领取口镂空丝印一个树和海洋图标。当人们领取广告单时,广告单数量减少．图标会逐渐的产生变化。通过这种图标的变化来警示人们环保的重要性。     

基于IPTV的网络教学系统的设计

以IPTV技术为支持的远程教育模式具有投入少且效果好的特点,在远程教育中发挥着越来越重要的作用.利用P2P和流媒体技术为支撑,设计和实现了具有IPTV交互特点的远程教育系统.该系统包括课后练习,测试以及答疑等学习活动,实现集在线学习,游戏娱乐,生活服务于一体的互动数字化教育,并有效解决实时课堂传输中视频质量的问题.     

微媒体环境下大学生移动学习探究

以微信、微博为代表的微媒体迅速普及,悄然影响着大学生的生活和学习,教师如何借助这些新型媒体引导大学生更好地移动学习值得我们探究,本研究通过问卷调查和分析,对在微媒体环境下开展大学生移动学习提出了若干建议,为相关教师提供借鉴。     

Pore structure of bulk tungsten carbide powder catalysts

Bulk tungsten carbide catalysts are prepared by direct carburization/reduction of tungsten trioxide in methane-hydrogen mixtures. The catalytic properties of such catalysts have been studied by several authors. The porous structure of these catalysts is studied by adsorption of N₂, Kr, CF₄ and neohexane. Adsorption isotherms and hysteresis loops for the catalysts suggest the presence of a microporous structure made of parallel plates distant approximately by 20 Å. These results are compared to those obtained using such catalysts for hydrogen oxidation and where condensation in the porous structure was observed.     

不同助烧结剂及造孔剂对SiC多孔陶瓷的影响

采用真空烧结方法制备了SiC多孔陶瓷，研究了不同助烧结剂Al2O3-Y2O3、Si以及不同造孔剂丙烯酰胺聚合物、羧甲基纤维素（CMC）对SiC多孔陶瓷形貌和气孔率的影响。结果表明：与Si相比较，Al2O3-Y2O3更有利于促进SiC的烧结；以Al2O3-Y2O3为助烧结剂的试样比以Si为助烧结剂的试样具有较高的气孔率。     

Transport processes during electrowashing of filter cakes

Applications of electric fields during washing of filter cakes increases the removal rate of ions from the cake mother liquor, and under appropriate conditions the field also increases the wash flow rate by electroosmosis. Experimental data that show the key effects of the fields on the rates of ion mass transfer are presented: with the downstream electrode acting as a cathode, cation removal rates are increased whilst the removal rate of the anions is decreased. The concentration profile of the cations with washing time shows an increase in concentration to a value above that of the mother liquor, before it decreases due to displacement by the fresh wash liquor. A model is formulated that describes the advection, dispersion, ion migration and electroosmosis transport processes in the cake. Numerical solution of the model gives cation concentration profiles at the exit of the cake that are in qualitative agreement with the experimental observations. Experimentally measured wash liquor flow rates tend to be lower than what traditional colloid science principles predict by a factor of 5-10: reasons for this difference, supported by experimental work from other researchers, are discussed.     

Drying characteristics of porous material immersed in a bed of hygroscopic porous particles fluidized under reduced pressure

A relatively large wet material was immersed in a fluidized bed of hygroscopic porous particle (silica gel beads) under reduced pressure. And then the drying characteristics were compared with those in the case of inert particle (glass beads). The comparison of drying characteristics is performed experimentally and theoretically. In calculation, the water transfer from the sample to the fluidized bed was considered. The calculation results are in good agreement with the experimental data. The effects of the operational conditions (the pressure in the drying chamber and the temperature of the drying gas) on the drying characteristics were also examined in both fluidizing particles.The drying finishes earlier in the case of hygroscopic porous particle than in the case of inert particle regardless of pressure in the drying chamber, since the water transfer from the sample facilitates the drying in the case of hygroscopic porous particles. The temperature decrement in drying appears in the case of inert particle. This phenomenon is also observed in the case of hygroscopic porous particle, but the decrement degree of the temperature is much smaller than that in the case of inert particle. The difference of the minimum temperature in the sample in drying between the cases of hygroscopic porous particle and inert particle is very slight for different pressures in the drying chamber.     

A discrete model for non-wetting liquid flow from a point source in a packed bed under the influence of gas flow

A study of non-wetting flow in a packed bed under the influence of gas flow has been carried out. Departing from the usual continuum models, a discrete and deterministic model for liquid flow has been presented to model the liquid flow from single and multiple point sources. Liquid flow is modelled based on force balance approach considering gas drag, bed resistance and gravity forces. Gas flow is modelled using k-ε model for turbulent flow. An X-ray flow visualization technique, developed by our group, is used to study the liquid flow paths in the packed bed. Liquid flow path and velocity has been obtained for various liquid and gas flow rate. Flow paths obtained from the simulation results are in good agreement to those obtained from flow visualization procedure under various conditions. Also, liquid distribution at the bed bottom is reported and compared with the experimental results.     

面向客户体验的移动数据网络的测量分析系统及其应用

随着数据业务的丰富,现有的移动数据网络指标无法直接反映用户感知,必须建立面向客户体验的网络测量分析系统,从而有效刻画用户的业务感知.以流媒体业务为例,利用面向客户体验的网络测量分析系统,通过建立网络测试指标和客户感知指标之间的对应关系,探讨了基于客户体验的移动数据业务的的评测及进一步的优化.     

多孔形状记忆合金表面羟基磷灰石涂层的沉积

燃烧合成法制备的多孔Ti50Ni48Fe2形状记忆合金具有三维连通的孔隙结构,其平均孔隙尺寸约为350μm。采用化学法即酸液和碱液处理后在模拟体液中浸泡一定时间可在多孔形状记忆合金表面沉积出羟基磷灰石涂层.