数控超声磨削陶瓷叶片型面刀位轨迹计算

介绍了陶瓷超声磨削加工现状,建立了平行直纹面数学模型.分析了用圆柱磨轮四轴数控超声磨削平行直纹面时原理误差,并提出减小误差的措施,计算出磨轮空间轨迹,并进行陶瓷叶片型面超声磨削加工工艺试验.试验结果表明,超声磨削加工陶瓷叶片型面是可行的,所完成的刀位计算可有效减小原理误差.     

Surface performance of workpieces processed by electrical discharge machining in gas

The surface performance of workpieces processed by electrical discharge machining in gas(dry EDM)was studied in this paper.Firstly,the composition,micro hardness and recast layer of electrical discharge machined(EDMed)surface of 45 carbon steels in air were investigated through different test analysis methods.The results show that the workpiece surface EDMed in air contains a certain quantity of oxide,and oxidation occurs on the workpiece surface.Compared with the surface of workpieces processed in kerosene,fewer cracks exist on the dry EDMed workpiece surface,and the surface recast layer is thinner than that obtained by conventional EDM.The micro hardness of workpieces machined by dry EDM method is lower than that machined in kerosene,and higher than that of the matrix.In addition,experiments were conducted on the surface wear resistance of workpieces processed in air and kerosene using copper electrode and titanium alloy electrode.The results indicate that the surface wear resistance of workpieces processed in air can be improved,and it is related with tool material and dielectric.     

Root growth and phosphorus and potassium uptake by two corn genotypes in the field

In a field study P and K uptake by two corn (Zea mays L.) genotypes which differed in root growth was investigated. The effect of differences in root growth on P and K uptake was assessed using a mechanistic-mathematical model which describes nutrient uptake by growing plant roots in soil. Nitrogen was applied at 0 and 227 kg ha^–1 to Pioneer 3732 and B73xMo17 corn grown on Raub silt loam (fine-silty, mixed, mesic Aquic Argiudoll) and at 227 kg N ha^–1 to these two genotypes on Chalmers silt loam (finesilty, mixed, mesic, Typic Haplaquoll). Root growth and P and K uptake by the two corn genotypes was measured 31, 47, 75 and 91 d after planting on the Raub and 31, 47, 61 and 75 d after planting on the Chalmers soil.Root growth and P and K uptake by B73xMo17 was greater than that of Pioneer 3732 on N-fertilized Raub soil. On Chalmers soil the difference in root growth between the two genotypes resulted in an increase in K but not P uptake. The higher soil P level of the Chalmers appears to have offset possible differences in P uptake due to root size. There were no differences between the two genotypes in either the percentage of roots with root hairs, or the density or length of root hairs. Phosphorus and K uptake calculated with the simulation models for both corn genotypes on both soils over each of three growth periods agreed with observed P (Y = 0.68X + 1.71; r = 0.944^**) and K (Y = 0.88X + 15.52; r = 0.928^**) uptake. Differences in P and K uptake between B73xMo17 and Pioneer 3732 resulted primarily from the difference in root growth in the topsoil. A high correlation was found between root surface area and P (r = 0.893^**) and K (r = 0.928^**) uptake by both corn genotypes on both the soils.Journal paper No. 10,316 Purdue Univ. Agric. Exp. Stn., W. Lafayette, In 47906. Contribution from the Dep. of Agron. This paper was supported in part by a grant from the Tennessee Valley Authority.     

基于自编码和知识蒸馏的表面缺陷检测方法

针对传统的表面缺陷检测方法只能对具有高对比度或低噪声的明显缺陷轮廓进行检测的问题,提出了一种基于自编码和知识蒸馏的表面缺陷检测方法来准确定位和分类从实际工业环境捕获的输入图像中出现的缺陷。首先,设计了一种级联自动编码器（CAE）架构用于分割和定位缺陷,其目的是将输入的原始图像转换为基于CAE的预测蒙版;其次,利用阈值模块对预测结果进行二值化以获得准确的缺陷轮廓;然后,把缺陷区域检测器提取并裁剪出来的缺陷区域视为下一个模块的输入;最后,将CAE分割结果的缺陷区域通过知识蒸馏进行类别分类。实验结果表明,与其他几种表面缺陷检测方法相比,所提出的方法综合性能最好,其缺陷检测平均准确率为97.00%。该方法能够有效地对较小的、边缘不清晰的缺陷进行分割,满足对物品表面缺陷实时分割检测的工程要求。     

Influence of depth-thickness ratio of mining on the stability of a bedding slope with its sliding surface in concave deformation

In order to study the influence of depth-thickness ratio on bedding slope stability, whose sliding surface is flexural concave in shape under mining conditions, this paper aims to study the characteristics of deformation and damage of bedding sliding with depth-thickness ratios of 200:1, 150:1, 120:1, 100:1 and 50:1by adopting numerical simulation analysis software combined with laboratory-made ‘‘under the influence of mining variable sliding surface slope similar simulation test bed", and to propose identification methods for slope stability under the influence of mining. The results show that mining activities under the slope reduce slope stability. With a decrease in the mining depth ratio, the influence of mining on the slope increases gradually, and the damage to the slope gradually expands, the stability of the slope gradually reduces, fracture occurs on the slope toe and the central fissure gradually develops to the surface,and reaches slide threshold when the depth-thickness ratio is 50:1.     

基于解析解的四阶PDE曲面裁剪方法

该文提出了一种可以广泛应用于四阶PDE曲面的裁剪方法。利用PDE的参数域内的曲线在曲面上投影,得到所求裁剪曲面的边界曲线,然后通过边界曲线的导矢与曲面在边界曲线处的法向量得到边界曲线处的跨界导矢,最后以求得的裁剪曲面的边界曲线以及裁剪曲面在边界曲线处的跨界导矢为PDE曲面的边界条件,用四阶的PDE曲面方程求得PDE裁剪曲面。     

基于表面反应和扩散迁移控制的灰岩单裂隙渗流—溶解模型及其数值模拟

针对碳酸盐类可溶岩地区水电站坝址流场、化学场以及固相介质属性等随时间发生改变,从而对工程安全运行造成不利影响等问题,研究了灰岩地区地下水运移过程中各物理场间的相互作用,分析了影响灰岩溶解速率的两个因素,即表面反应控制和扩散迁移控制。在此基础上,建立了单裂隙中的渗流—溶解耦合模型,并进行数值求解。模拟结果表明,在垂直裂隙延伸方向,其溶蚀锋面为非齐整平面,而是呈似“虫洞”状非均一变化,而沿裂隙延伸方向即自上游侧向下游方向溶蚀程度逐渐减轻;而通过裂隙的流量呈现随时间逐渐增大的趋势,但变幅不大;根据流量求得的等效水力隙宽,其增幅和增长速率均小于实际平均隙宽;同时,化学场中Ca2+浓度的分布与裂隙开度变化具有相似性,不同时刻下上游侧反应速率R均大于下游侧。就反应机制而言,在初期均受表面反应控制,而随反应进行,位于上游补给区部位转为受扩散迁移控制,但在下游位置仍受表面反应控制。     

Effect of surface coating on the screw loosening of dental abutment screws

Regardless of the type of performed restoration, in most cases, a screw connection is employed between the abutment and implant. For this reason, implant screw loosening has remained a problem in restorative practices. The purpose of this study was to compare the surface of coated/plated screws with titanium and gold alloy screws and to evaluate the physical properties of coated/plated material after scratch tests via FE-SEM (field emission scanning electron microscopy) investigation. GoldTite, titanium screws provided by 3i (Implant Innovation, USA) and TorqTite, titanium screws by Steri-Oss (Nobel Biocare, USA) and gold screws and titanium screws by AVANA (Osstem Implant, Korea) were selected for this study. The surface, crest, and root of the abutment screws were observed by FE-SEM. A micro-diamond needle was also prepared for the scratch test. Each abutment screw was fixed, and a scratch on the surface of the head region was made at constant load and thereafter the fine trace was observed with FE-SEM. The surface of GoldTite was smoother than that of other screws and it also had abundant ductility and malleability compared with titanium and gold screws. The scratch tests also revealed that teflon particles were exfoliated easily in the screw coated with teflon. The titanium screw had rough surface and low ductility. The clinical use of gold-plated screws is recommended as a means of preventing screw loosening.     

用双层辉光等离子法在钛表面制备的Ti-Pd合金层性能研究

采用双层辉光等离子冶金技术在纯钛表面制备了Ti—Pd合金层。其深度大约为90μm，Pd含量呈梯度变化，并出现了TiPd3，TiPd2，Ti2Pd3，Ti3Pd5，TiPd，Ti4Pd等6种化合物相和Pd相。合金层在100℃的NaCl饱和溶液＋HCl溶液以及40℃的8．6％H2SO4溶液中的耐缝隙腐蚀性能优于Ti0．2Pd合金；在室温80％H2SO4的溶液中，腐蚀速率仅为0．682mm／a，是Ti0．2Pd合金的18．2％：在室温30％HCl的溶液中，表面Ti—Pd的腐蚀速率仅为0．004mm／a，是Ti0．2Pd合金的12．5％。     

Solar furnace surface treatment of plasma-sprayed thermal barrier coatings

An original process of superficial thermal treatment is described. This process has been successfully applied to partially stabilized yttria-zirconia coatings (ZrO₂-Y₂O₃) to increase the lifetime of the thermal barriers. A thin superficial layer was melted, and morphological transformations were observed. A microstructural comparison between as-sprayed layers and thermally treated layers is presented.