Ni-P-Ce合金体系复合刷镀层沉积行为研究

在Ni-P合金复合刷镀液中,添加稀土Ce3+,可以通过电刷镀沉积出Ni-P-Ce合金镀层,并可提高刷镀层的沉积速度和刷镀液稳定性;稀土化合物CeCl3·7H2O含量在35g/L左右时,刷镀的电流效率及沉积速度高;柠檬酸在Ni-P-Ce刷镀液中既可起稳定剂的作用,又可使Ce3+离子从溶液中电沉积出来。     

变频开关电源Fuzzy-PID控制器的设计

针对感应式变频开关电源在对金属材料进行热处理过程中，负载的等效参数和谐振频率发生变化，而变频电源的输出频率不能及时调整和跟踪的问题，结合PID和Fuzzy控制技术的优点，设计Fuzzy-PID控制器对变频电源进行控制，在大偏差时用Fuzzy控制，在小偏差时用PID调节。Fuzzy-PID控制器以单片机8098为核心，采用SPWM专用芯片SA4828，实现变频开关电源的电压、电流双闭环控制，使变频电源不仅具有较快的动态响应、更小的超调，并且具有较高的稳态精度和频率跟踪控制特性。     

锡磷青铜合金水平连铸工艺参数的优化

铸造锡磷青铜合金组织中存在显微缩松、枝晶偏析和反偏析是冷加工报废的主要原因.通过连铸工艺参数的正交实验,建立了轧制成材率与主要工艺参数之间的神经网络描述,网络模型与遗传算法结合对工艺参数的组合进行了优化,改善了铸坯的组织,提高了轧制带材成材率.     

Tribological behavior of high specific strength PTFE-Al alloy composite

Solid lubricants lead to substantial weight savings relative to the use of liquid lubricant, especially in the weight-conscious aerospace industry. A new PTFE-Al alloy composite（A） containing 60% area proportion of PTFE composite was developed. Another type of common metal-plastics multilayer composite, also called DU, was selected for a comparative investigation. Friction and wear tests were carried out in an oscillating sliding tribotester in air at an oscillating frequency of 0.13 Hz and contact mean pressures from 10 to 80 MPa. The composites slid against a 38CrMoAlA steel shaft. The results show that the composite A exhibits low coefficient of dry sliding friction less than 0.1 and long wear life of 2 000 m. This is because the composite A can provide a sufficient solid lubrication during the whole tests. SEM examination of the transfer films for the composite A confirms that uniform, thin and coherent transfer films are prerequisites for low friction and good wear resistance.     

Influence of expandable graphite on fire resistance and water resistance of flame-retardant coatings

Expandable graphite (EG) coating and ammonium polyphosphate-pentaerythritol-melamine (APP-PER-MEL) coating were prepared. Thermal degradation and char formation of the coatings were investigated by differential thermal analysis (DTA), thermogravimetry (TG), X-ray diffraction (XRD), scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS). The results have shown that the anti-oxidation and fire-resistant properties of expandable graphite coating containing EG with size of 74 μm are better than those of APP-PER-MEL coating. The static immersion test was applied to study water resistance of the coatings, and the fire protection test and mechanical test were used to analyse heat insulation and mechanical properties of coatings before and after water immersion. The fire-resistant and mechanical properties of APP-PER-MEL coating were severely damaged by water immersion, whereas EG coating containing 8.5% EG with size of 74 μm could retain the good fire resistance even after 500 h water immersion.     

快速凝固Mg94.6Zn4.8Y0.6合金薄带微观结构及显微偏析

采用单辊快速凝固技术制备了Mg94．6 Zn4．8 Y0.6合金快速凝固薄带，并通过扫描电镜的背散射及线扫描研究了快速凝固Mg94．6 Zn4．8 Y0.6合金薄带的显微偏析。结菜表明，由于溶质截流，单辊快速凝固Mg94．6 Zn4．8 Y0.6合金薄带为过饱和单相α—Mg固溶体的蜂窝状组织，Mg、Zn和Y宏观分布比较均匀。但在薄带厚度方向上存在偏析，在晶内也存在显微偏析，偏析形成是由于从辊面到自由面凝固速度的差异及溶质传输和晶格结构造成的，其中Zn元素偏析最大，Y元素次之，Mg元素最小。     

基于人工神经网络的结构钢回火后力学性能预测

利用多层前向神经网络，使用B－P算法对结构钢回火性能预测进行了研究。通过利用99种钢450余组训练数据样本对神经网络进行训练，建立了结构钢回火后的力学性能与金属成分和回火温度之间的隐性函数。并针对训练用样本不足的问题，设计了为网络提供自学功能软件，在钢完全淬透的前提下，用此神经网络模型可在一定精度范围内预测结构钢的回火力学性能。     

工序能力评价与经济分析

通过对工序能力的分析与评价 ,工序能力并非越高越好 ,提高工序能力有时意味着增加成本 ,故应作经济分析 ,本文介绍了一种经济分析的方法。     

Numerically optimal design for the system with coupled complex transport phenomena-application to the Submerged Entry<Emphasis Type="Italic">Nozzle</Emphasis> in continuous slab caster

This study presents a simple and robust algorithm for the optimal design of the system with coupled complex transport phenomena: the transport phenomena comprise fluid flow, heat and mass transfer. The (1+1)-Evolution Strategy method is adopted as the optimization method. In order to analyze the transport phenomena in the complex geometry generated during the optimization procedure, thefinite volume method with a boundary fitted curvilinear coordinate system is used. To confirm the validity of the present method, the optimal design for the inner shape of the simplified two-dimensionalSubmerged Entry Nozzle in the continuous slab caster is conducted. It is shown that the resulting design of the nozzle is consistent with the purpose and constraints of the design.     

ZrC含量对TiC基金属陶瓷组织和性能的影响

真空烧结制备了TiC-ZrC-Co-Ni系金属陶瓷,研究了ZrC对TiC基金属陶瓷显微组织和室温力学性能的影响。结果表明:未加ZrC的TiC基金属陶瓷的显微组织表现为经典的黑芯-灰壳组织,硬质相形状多为球形;而加入ZrC后的金属陶瓷随着ZrC加入量的增多,组织逐渐细化,硬质相形状大多数为方形,硬质相与粘结相界面呈现直线,在黑芯周围出现白色球状(Ti,Zr)C固溶体。由于Co、Ni对ZrC的润湿性不理想,金属陶瓷的致密度随着ZrC含量的增加而下降,室温力学性能(抗弯强度、硬度、断裂韧性)也随之降低。