副井提升系统安全回路及上位机优化改造

针对煤矿副井提升系统安全回路软硬件及上位机中存在的不足进行了优化改造,改进了过卷试验方式,将闸系统紧停信号引入安全回路,并将安全回路各节点状态信号引入RSView32人机界面,实时显示安全回路状态;根据现场检修需要,在上位机增加了复位显示功能及行程偏差大报警信号。实际应用表明,该优化改造可迅速定位故障节点,实现软硬件互查。     

Investigation of Flow Patterns in Continuous‐flow Stirred Vessels by Laser Doppler Velocimetry

The flow structure of a continuous‐flow reactor stirred by a Rushton turbine was investigated by laser Doppler velocimetry for two different mean residence time‐mixing time ratios. Velocity measurements were obtained for two inlet locations, corresponding to the incoming liquid stream being fed co‐currently or counter‐currently to the flow discharged by the turbine. In all investigated configurations and for all operating conditions, it was found that the flow disruption caused by the incoming liquid stream was observable mainly in the first vessel quarter, which followed the feed‐tube plane. From comparison of the velocities encountered in the various planes in the continuous‐flow reactor to the velocities of the batch reactor, it was also concluded that it may be possible to intensify the usage of the turbine‐stirred vessel by decreasing the characteristic times ratio, without considerable flow by‐pass and/or short‐circuiting problems.     

Development of design principles for a creep-limited alloy for turbine blades

Recent advancements in turbine-blade materials engineering are reviewed in light of general superalloy research and the author’s work on a new powder metallurgy IN-792 creep-limited alloy for application in blades of gas-turbine engines. The developed set of principles presented in this paper incorporates all the factors that must be taken into consideration in selecting and designing an alloy for turbine blades.     

TBC experience in land- based gas turbines

This paper summarizes prior and on-going machine evaluations of thermal barrier coatings (TBC) for power generation, that is large industrial gas turbine applications. Rainbow testing of TBCs on turbine nozzles, shrouds, and buckets are described along with a test of combustor liners. General Electric Power Generation has conducted more than IS machine tests on TBC turbine nozzles with various coatings. TBC performance has been quite good, and additional testing, including TBCs on shrouds and buckets, is continuing. Included is a brief comparison of TBC requirements for power generation and aircraft turbines.     

天然气长输管道燃驱机组控制系统优化技术

燃气轮机驱动的压缩机组被广泛地应用在天然气长输管道,其控制系统优化技术的大范围深度应用在管道行业尚数首次,及时消除生产瓶颈的同时,也为涉及燃机的控制专业同行提供了技术借鉴,更重要的是为管道行业燃机运行提供了安全保障。     

基于模糊决策的风力发电产业评价研究

根据风力发电技术产业的特点,构建改进层次分析与模糊一致矩阵相结合的方案决策数学模型,该模型既可以减少确定判断矩阵的盲目性,又可以避开评价体系中各等级间的隶属度确定问题,使评价结果更加可靠,适合于信息尚不完整、受主观因素影响较强的评价。实例验证了这一模型的合理性、可行性和有效性,具有实用价值。     

以可靠性为中心的水轮机组检修模式研究

以可靠性为中心(RCM)的维修模式是在一般视情维修的基础上,吸收以可靠性为中心的维修分析法的优点,充分考虑到经济性、可靠性原则,并与先进的设备诊断技术相结合的一种维修模式。介绍了水轮机组RCM维修模式,重点分析了根据经济性和可靠性原则分别确定隐患检测间隔期,以及用威布尔分布拟合机组零部件故障间隔时间分布的表示及参数的获得。     

右江水力发电厂水导轴承油冷却方式的探讨及改进

通过数据监测,对右江水电厂4台机组水导轴承运行中出现瓦温缓慢上升的问题进行分析,查找原因,并提出了不同的技术改造方案,对比后择优实施,既保证了水电厂的长期安全稳定运行,又为企业节省了成本.     

Optimal blank design based on finite element method for blades of large Francis turbines

Metal pressing process that is widely used in industries has advantages over casting process for producing large Francis turbine blades from thick plates. Prior to the pressing process, blank design is firstly performed to determine flat blanks. The traditional trial and error approach is not applicable to blade design for Francis turbines that are not standard due to hydraulic characteristics of power plant sites. The rapid development of computing technology makes it possible to obtain optimal flat blanks by numerical modelling and simulation. In this paper, inverse finite element approach is investigated for blank design and an elasto-plastic model has been built using the well-known commercial software ANSYS. Numerical simulations for blade unfolding models with thick shell elements, solid elements and shell elements have given results with negligible differences. Unfolding tests with simple geometries have been carried out and the numerical results agree well with the analytical solutions. A large and thick shape of a Francis turbine blade for a hydropower plant has been successfully unfolded by inverse FE model. Sensibility analysis shows that the middle surface of the flat blank is independent of blade thickness. For ensuring the machining of the blade after the pressing process, a new contour is obtained by extending the boundary of the flat blank provided by the numerical model. This research may provide a useful tool for optimal blank design of Francis turbine blades.     

双护盾掘进机洞轴线纠偏实例

在利用双护盾隧洞掘进机进行同忻煤矿主斜井开挖的过程中发生了卡机事故,开挖斜井的轴线偏离了正确的方向。文中分析了事故发生的原因,介绍了采取的掘进机整机后退的措施,使得成功地摆脱了困境。