耐高温辐射涂料在加热炉上的应用

分析了耐高温辐射涂料(HT—1)在加热炉应用的节能机理,工业实验取得良好效果。     

中国先进研究堆冷中子源核发热和冷中子增益研究

为准确计算和研究中国先进研究堆（CARR）冷中子源装置氢系统的核发热和冷中子增益，建立了一整套计算方法。对参考堆的验证计算证明了该方法的正确性和有效性。对影响CARR冷中子源核发热和冷中子增益的各种因素（如慢化剂、冷包材料、冷包形状等）进行了计算和优化选择。结果表明：在核发热量较小的条件下获得了较好的冷中子增益。     

宣钢棒材加热炉悬臂辊道的改进

对宣钢棒材加热炉出入炉悬臂辊道漏水、烧损等现象进行了分析，提出了改进措施。     

分布式集中供热微机控制系统

由供热站控制装置、温度巡测仪和ＰＣ－３８６微机构成对供热站及热用户的多种现场参数进行采集与控制。文中提出了一种根据补水进行前馈控制的方法。并给出了远距离测温探头的实际应用线路。     

燃油加热炉改烧奥里油的尝试

奥里油是一种含乳化液较多的新油种，作者配合某厂机动处,对该油种进行了理论分析,并在连续加热炉上替代重油燃烧进行了有益的尝试。     

自动化控制系统在城市集中供热领域的应用

介绍自动控制系统在城市供热领域的应用,达到热网热平衡、节能环保及节省投资等目的。     

连续推钢式加热炉汽包假水位事故分析

分析棒线材厂加热炉汽包出现假水位造成的事故原因,并提出整改措施。     

Influence of base resistance on extracting thermal resistance for SiGe HBTs

In this article, the influence of base resistance on extracting thermal resistance for SiGe heterojunction bipolar transistors is studied and an improved approach for determining the junction temperature and thermal resistance is presented. The proposed method for extracting thermal resistance is based on the temperature sensitivity of the base–emitter (B–E) voltage when the device is biased with a fixed emitter current density. This approach not only takes into account the self‐heating during the different ambient temperature measurement but also revises the empirical equation of B–E voltage due to the influence of base resistance during the power dissipation increment measurement. Results are obtained for devices with different emitter lengths and fingers. Compared with the conventional method, the thermal resistance is about up to 15% improvement for the device with 0.3 × 1.9 μm² emitter area and 13.8% for the device with 0.3 × 13.9 μm² emitter area. The accurate thermal resistance implemented in HICUM model has resulted in better fit for transistor output characteristics. © 2012 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2012.     

Measurement of the heat of fusion of titanium and a titanium alloy (90Ti-6Al-4V) by a microsecond-resolution transient technique

A microsecond-resolution pulse heating technique was used for the measurement of the heat of fusion of titanium and a titanium alloy (90Ti-6Al-4V). The method is based on rapid (50- to 100-s) resistive self-heating of the specimen by a high-current pulse from a capacitor discharge system and measuring, as functions of time, current through the specimen, voltage across the specimen, and radiance of the specimen. Melting of the specimen is manifested by a plateau in the measured radiance. The time integral of the net power absorbed by the specimen during melting yields the heat of fusion. The values obtained for heat of fusion were 272 J · g^–1 (13.0 kJ · mol^–1) for titanium and 286 J · g^–1 for the alloy 90Ti-6Al-4V, with an estimated maximum uncertainty of ±6% in each value.Paper presented at the Second Workshop on Subsecond Thermophysics, September 20–21, 1990, Torino, Italy.     

A new microsecond pulse-heating system to investigate thermophysical properties of solid and liquid metals

A new discharge system for resistive self-heating has been constructed for the measurement of accurate thermophysical properties. A constant-current pulse is used to heat metals over a time interval of 50 to 100 s, reaching temperatures up to the boiling point. New techniques have been developed to obtain sound speeds in the pulse-heated sample, emissivities, and vapor pressure. A new pyrometer allows the extension of the measured temperature range down to the melting point of copper.