淹没深度对三自由度波能浮子获能的影响

为明确浮子淹没深度对三自由度浮子装置获能的影响,提出漂浮式与淹没式两种浮子模型,计算并比较在不同淹没深度和波浪条件下浮子的获能特性。浮子模型具有纵荡、垂荡与纵摇3个运动自由度。浮子选用直立圆柱体浮子。淹没深度分别设置为其高度的0.5、1.0、1.5与2.0倍,质量相同。漂浮式浮子模型作为对照,基于线性势流理论与边界元方法,建立浮子水动力学模型,计算浮子水动力学参数及运动响应,并采用线性能量转换(power take-off, PTO)系统阻尼,计算并对比浮子在最优PTO阻尼下的平均输出功率,分析淹没深度对浮子获能的影响。研究结果表明,增大淹没深度可以减小浮子的波浪激励力和平均输出功率。对于三自由度浮子,漂浮浮子在低频波浪下获能特性较好,而具有较小淹没深度的浮子在高频波浪下性能更优。     

地区电网新能源消纳困难时段研究

文章主要研究了某实际电网新能源消纳困难时段。通过负荷特性分析,得出地区电网低谷负荷出现季节和典型日负荷特性,通过风电场、光伏电站出力特性分析,得出风电、光伏季节分布特性及日出力特性。在地区电网新能源消纳的困难时段分析基础之上,对困难时段负荷概率进行统计,得出困难时段的负荷取值,为新能源接纳能力分析提供重要的数据支撑。     

多阶段规划工业园区的双重功能共享储能配置

以工业园区共享储能为研究对象,提出了包含储能和不间断电源双重功能的工业园区共享储能结构框架,建立了共享储能设备容量和共享储能运营商净现值的模型,为通过优化配置共享储能设备以实现新能源出力备用和替代不间断电源提供了一种可行的路径;采用场景树表示工业园区电力负荷和光伏的随机性,建立了一个旨在使共享储能运营商经济效益最大化的多阶段随机规划模型,并采用随机对偶动态规划算法对模型进行求解;利用具体算例验证了模型的有效性。     

Local distributions of electricity demand

A simple model for how electricity use might be distributed over space is developed and solved. The model depends on a simple characterization of “heat islands”, and considers summer cooling use in particular. Various technological changes to allow for electric grid use of renewable energy and other technologies, such as energy efficiency and hydrogen or electric vehicles, change the outcome of this model, and produce a “saddle”, not necessarily a “duck curve”. Inequality in income and wealth drives these results, and policies to ameliorate or remove these effects will have to be and be seen as fair to those of various income levels and locations.     

A blueprint for capturing grid value in a decentralized electricity sector

This study addresses the question of how the electricity grid can best be priced, in the context of disruptive technologies, increasing decentralisation of the power sector and new business models. The emergence of business models can affect the design of tariffs, but at the same time, tariff design can trigger new business models as they can nudge adoption towards certain technologies. Network tariffs have traditionally been established using a cost accounting method. Due to its cost structure, network tariffs are second best constructs, as marginal cost pricing does not lead to cost recovery. Second best solutions, in all probability, will overcompensate some inputs which in turn will be overused (the Averch-Johnson effect). New distributed energy technologies that perform better in these overcompensated inputs will therefore see a higher penetration in the market. Penetration of some technologies over others in a previously monolithic vertically integrated power sector will open up new customer needs and therefore business opportunities. Each resulting business opportunity would make use of the grid differently from which it was originally conceived, and at one extreme, they can bypass it altogether. We provide a framework of analysis that leads to the pricing of the services provided by the electricity grid for each new business opportunity.     

燃烧合成三元碳化合物Ti2AlC1-x

采用Ti，Al和C元素粉末为反应物原料，通过燃烧合成法首次成功地制备出了单相三元碳化合物Ti2AlC1-x。实验结果表明：若以“理想”晶体结构化学式Ti2AlC化学计量比为起始反应原料配比，燃烧产物主晶相为Ti2AlC2；以缺碳的非化学计量比(Ti2AlC1-x)为反应原料配比，即Ti：Al：C=3：1．5：1=2：1：0．7(摩尔比)，得到单相的燃烧产物Ti2AlC1-x。从热力学原理的角度探讨了不同原料摩尔配比对燃烧产物相组成的影响机理。     

Zr－1Nb合金吸氢性能研究

研究了１３种不同加工热处理制度的Ｚｒ－１Ｎｂ合金在堆外高压釜内３６０℃、１９ＭＰａ水中的吸氢性能，对其影响因素和吸氢机理进行了分析，并讨论了吸氢动力学，建立了吸氢动力学方程，计算了吸氢动力学参数。     

铸件退火炉烟气余热的回收利用装置

提出了HTAC技术的新结构,即铸件退火炉烟气余热的回收利用装置,以期提高热效率、节约能源并减轻污染。     

上部单烧嘴长坑均热炉改造试验研究

介绍了在上部单烧嘴长坑均热炉上，通过采用增加辅助烧嘴和辐射多孔体的改造措施，使炉温均匀，加热质量提高，并实现了节能降耗。     

热处理对多孔铝合金压缩吸能性能的影响

采用渗流铸造工艺 ,制备了Al Si系多孔铝合金 ,讨论了其压缩变形特征及能量吸收性能 ,分别对ZL10 1、ZL111两种多孔铝合金进行T6热处理 ,研究了热处理对这两种多孔铝合金压缩吸能性能的影响。研究结果表明 ,热处理能够提高多孔铝合金的能量吸收能力 ,对屈服强度及能量吸收效率也有显著的影响 ,为提高多孔铝合金的压缩性能 ,应尽可能施行热处理