New concept of surface modification to LiCoO2

As the continuance of our series study on LiCoO₂ surface modification, the complicated traditional surface coating method is replaced with simple addition of amorphous YPO₄ and Al₂O₃ in commercial LiCoO₂ or in commercial electrolyte based on our understanding to the improvement mechanism of surface modification. Comprehensive studies by X-ray photoelectron spectroscopy (XPS), gas chromatography and mass spectroscopy (GC–MS), inductively coupled plasma (ICP) and Fourier transformed infrared (FTIR) indicate that the products of spontaneous reaction between the additive and the LiPF₆ based electrolyte are responsible for the performance improvements.     

胶原改性促进高吸收铬鞣

介绍了胶原改性的几种方法及其所使用的材料 ,并讨论了其对皮革高吸收铬鞣产生的影响     

已二醇二丙烯酸酯对真丝的接枝改性研究

研究了用二醇二丙烯酸酯为接枝单体、过硫酸铵（APS）为引发剂对真丝的接枝共聚反应，分析了接枝率的影响素，并测试了改性真丝的主要应用性能。结果表明：乳液和乙醇/水为溶剂的2种体系都能在真丝上获得较高接枝率。对于乙醇/水体系v(乙醇）：v(H2O）=1:1，接枝单体20～30g/L,2%甲酸4ml，引发剂APS 0.5g/L,65～70℃接枝60min的接枝率高。改性后真丝的断裂强度、延伸度、吸湿性能都可获得改善，对酸、碱的溶解性提高，但染色性能提高不明显，对泛黄性改善一般。     

偶联剂处理硅灰石填充不饱和聚酯树脂的研究

对针状硅灰石 (L∶D≥ 10∶32 5目 )提纯后 ,采用偶联剂进行表面处理 ,将硅灰石按不同比例填充于不饱和聚酯树脂体系中 ,研究了材料的性能。结果表明 ,改性后的硅灰石可显著改善不饱和聚酯的性能。     

IFP连续重整新一代催化剂再生技术的改进

介绍了我国引进的采用法国石油研究院 (IFP)三代催化剂连续再生技术的重整装置 ,分析了第二、第三代技术在原有基础上的改进 ,从再生气循环回路、再生操作参数和再生器内部结构三个方面重点介绍了第三代催化剂连续再生技术的特点和优势 :使催化剂的烧焦气循环回路与氧氯化用气、焙烧气循环回路彼此分开 ,烧焦、氧氯化、焙烧的操作参数可分别得到优化 ,使氧氯化及焙烧在高氧条件下进行 ,有利于催化剂金属的再分散 ,保持催化剂的活性。     

Acceptability of genetically modified cheese presented as real product alternative

European consumers, in general, have negative attitudes towards the use of gene technology in food production. The objective of this study was to examine whether taste and health benefits influence the acceptability of genetically modified (gm) products when they are presented as real product alternatives. Consumers in Denmark, Finland, Norway and Sweden (n=738) assessed two cheeses: one was labelled as genetically modified (preferred in an earlier product test) and the other as conventional (neutral in an earlier product test). A smaller control group received two cheeses with blind codes. Labelling decreased consumers' intentions to buy the originally preferred gm-labelled cheese, but still the intentions were at the same level with the conventionally labelled option. Participants chose two gm cheeses out of five possible when given the option to take cheese home after tasting. Intentions to buy gm cheese could best be explained by respondents' attitudes towards gene technology and perceived taste benefits. General health interest was also a reinforcer of intentions for gm cheese with reduced fat content.     

Reducing Average and Peak Test Power Through Scan Chain Modification

Parallel test application helps reduce the otherwise considerable test times in SOCs; yet its applicability is limited by average and peak power considerations. The typical test vector loading techniques result in frequent transitions in the scan chain, which in turn reflect into significant levels of circuit switching unnecessarily. Judicious utilization of logic in the scan chain can help reduce transitions while loading the test vector needed. The transitions embedded in both test stimuli and the responses are handled through scan chain modifications consisting of logic gate insertion between scan cells as well as inversion of capture paths. No performance degradation ensues as these modifications have no impact on functional execution. To reduce average and peak power, we herein propose computationally efficient schemes that identify the location and the type of logic to be inserted. The experimental results confirm the significant reductions in test power possible under the proposed scheme.     

纳米二氧化钛的表面修饰与应用的研究进展

介绍了纳米二氧化钛表面修饰的两种主要方法:无机和有机表面包覆,以及进行修饰后的纳米二氧化钛的应用.     

聚丙烯表面改性及与涂料的粘结

讨论了聚丙烯制品喷涂着色的优点及影响聚丙烯制品与涂料之间粘结强度的各种因素。综述和评价了对聚丙烯进行表面改性的必要性及各种表面改性方法。     

中原高温高盐油藏疏水缔合聚合物凝胶调剖剂研究

针对中原油田高温(>80℃)、高盐度(>50 g/L)、高硬度(>1 g/L)砂岩油藏,研制了地下成胶的高热稳定性聚合物凝胶调剖剂。所用聚合物为疏水缔合聚合物AP-P4,M=9.0×106,HD=27%,疏水基摩尔分数0.2%;交联剂为可生成酚醛树脂的3种化合物;调剖剂胶液用矿化度160 g/L的马寨油田污水配制;实验温度95℃。根据形成的凝胶黏度(95℃,1.1 s-1)确定交联剂各组分用量为:MZ-YL 0.429%,MZ-BE 0.060%,MZ-XS 0.012%;酸度调整剂用量0.12%;成胶时间10~15小时。2.5、3.0、3.5 g/L AP-P4的凝胶在95℃老化100天后黏度保持在~40 Pa.s及以上。初配制胶液在3000 r/min下剪切15分钟后黏度降低87.5%~89.0%,但成胶后和老化过程中凝胶黏度只比未剪切样降低17.1%~6.6%。3.5 g/L AP-P4的调剖剂对~1μm2的6支储层岩心的堵塞率在88.1%~95.8%范围,平均93.3%,造成的残余阻力系数在15.2~28.6范围,平均19.8,使渗透率级差2.3~8.0的4组双人造岩心的注水流量比发生不同程度的反转。认为该凝胶调剖剂高温下稳定性好的原因,是强化学交联密度低,因而凝胶脱水收缩作用弱。图2表5参5。