Foams based on low density polyethylene/hectorite nanocomposites: Thermal stability and thermo‐mechanical properties

Novel polymer nanocomposite foams made by a two step compression molding method are analyzed in this article. Nanocomposites of low density polyethylene and an organo‐modified hectorite were first melt compounded and then foamed using a compression molding method. To study the influence of the presence and the amount of hectorite in both mechanical and thermal properties, samples with 3% and 7% content of hectorite were prepared. Polyethylene crystalline characteristics and thermal stability of the samples were studied by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA), respectively. Mechanical properties of foams and solid nanocomposites were analyzed by using dynamical mechanical analysis (DMA). Thermal expansion of the samples was analyzed by thermomechanical analysis. The results indicate that the exfoliation of hectorite platelets was achieved after the foaming process, but not during the melt mixing step. Foams with hectorite nanoparticles exhibit improved thermal stability and mechanical properties when compared with neat polymeric foams. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Preparation of porous thin films of a partially aliphatic polyimide

A thermally labile polymer, poly(propylene glycol), was modified to obtain PPG having an amino end group. PPG was incorporated into a partially aliphatic polyimide based on an alicyclic dianhydride, and this afforded triblock copolymers containing various amounts of PPG blocks. The thermal properties of the copolymers were investigated by thermogravimetric analysis and differential scanning calorimetry. The thermal decomposition of the PPG block in the copolymers was carried out at 240°C under various pressures to obtain porous polyimide films. The pores remained during the thermolysis under a reduced pressure of 710 mmHg, whereas they collapsed under (near) atmospheric pressure. The pore size increased as the amount of the PPG block in the copolymers increased. The dielectric constants of the porous polyimides varied from 2.60 to 2.42 with the original copolymer composition. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 532–538, 2006     

金属—橡胶硫化粘接复合体剥离破坏行为的研究

本文分析了对橡胶分子链特性、部分交联弹性聚合物材料的粘弹行为及金属──橡胶硫化粘接体剥离过程中聚合物分子链的应力分布状况和剥离破坏模型，认为粘着一滑动（Stick—slip）模型剥离破坏并非是橡胶类材料的固有特征，而是由于金属──橡胶硫化粘接过程中的分子取向交联和部分交联弹性材料多个凯尔文（Kelvin）模型粘弹行为的综合结果．同时指出单从剥离试验的结果难以表征金属——橡胶硫化粘接复合作的粘接效果．     

Adsorption of mercaptopropionic acid onto Au(1 1 1): Part II. Effect on copper electrodeposition

Copper deposition in the presence of an organic additive (3-mercaptopropionic acid, MPA) was studied by cyclic voltammetry and in situ scanning tunneling microscopy (STM) and the results are compared to those for additive-free solutions. It is shown that underpotential deposition (upd) of copper onto a fully MPA-covered electrode produces a defect-rich substrate, but the defects are blocked by the dense organic film for bulk deposition, resulting in a low number of nuclei. A grain-refining effect of MPA, however, was found, when Cu deposition was initiated shortly after addition of MPA to the solution, i.e., for a low-coverage MPA adlayer.     

全启发式教学法在“金属切削机床与刀具”课程中的应用

针对当代大学生的特点,阐述了来自于建构主义的全启发式教学方法的理论,对“金属切削机床与刀具”课程内容进行问题分解,采用以启发诱导、共同协作为核心的全启发式教学方法,对该课程的教学环节进行了合理的设计。     

Thermal properties of open-celled aluminum foams prepared by two infiltration casting methods

Contrastive research was carried out to study the thermal properties of open-celled aluminum foams prepared by counter-gravity infiltration casting system and the traditional process respectively.The experimental results show that the thermal conductivity coefficients of aluminum foams prepared by two different infiltration methods have similar increasing trend with the increase of particle size; along with the reducing porosity,the thermal conductivity coefficients will be enhanced oppositely.However,with the same particle size,the open-celled aluminum foam prepared by the former method has a higher thermal conductivity coefficient obviously.It is largely because that the sample prepared by counter-gravity infiltration casting has a lower void content and better dense crystallization of metal-matrix after the constant pressure process.     

Preparation and balanced mechanical properties of solid and foamed isotactic polypropylene/SEBS composites

This study presents a self-designed foaming apparatus and routes to manufacture foamed isotactic polypropylene (iPP) blends with uniform and dense cells, using styrene-ethylene-butadiene-styrene (SEBS) block copolymer as toughening additive. The addition of SEBS can clearly enhance the impact strength of solid iPP, iPP blends with a 20 wt% SEBS has obtained high notched impact strength of 75 kJ/m², which is ca. 16 times larger than that of neat iPP. Relatively fine microcellular iPP-SEBS foams with the average cell size of several micrometers, and the cell density of 10⁹ cells/cm³ were fabricated using a batch foaming procedure. Moreover, using our self-designed mold and compression foaming method, iPP-SEBS foams with balanced mechanical properties were produced. With the increasing of SEBS, tensile strength and flexural strength were slightly decreased, but the impact strength was increased clearly. The balanced mechanical properties between stiffness and toughness were achieved after compression foaming.     

Aramid fiber reinforced EPDM microcellular foams: Influence of the aramid fiber content on rheological behavior,mechanical properties,thermal properties,and cellular structure

In this paper, aramid fiber (AF)/ethylene-propylene-diene monomer (EPDM) microcellular foams added with different content of AF are prepared by the supercritical foaming method. The effect of the AF content on the rheological behavior, mechanical properties, thermal properties and cellular structure of the AF/EPDM microcellular foams has been systematically studied. The research illustrates that compared with pure EPDM, the AF/EPDM matrix has greater viscosity and modulus, which is conducive to reduce the cell size and increase its density. And the thermal stability of EPDM foams is improved with the addition of aramid fiber. Meanwhile, when the content of AF is added to 1 wt%, the AF/EPDM microcellular foam exhibits a relatively low thermal diffusion coefficient and apparent density with the thermal conductivity to 0.06 W/mK. When the AF is added to 5 wt%, the tensile strength of the AF/EPDM microcellular foam increases to 1.95 MPa, which is improved by 47% compared with that of the pure EPDM foam. Furthermore, when the compressive strain reaches to 50%, the compressive strength of the AF/EPDM microcellular foam is 0.48 MPa, improved by 296% compared with that of the pure EPDM foam.     

Aramid pulp treated with imidazolium ionic liquids as a filler in rigid polyurethane bio-foams

This article reports an aramid pulp (AP) treated with two ionic liquids (IL), namely 1-n-butyl-3-methylimidazolium chloride (C₄.Cl) and 1-carboxymethyl-3-methylimidazolium chloride (HO₂C), and its use as a filler in reinforced rigid polyurethane foams (RPUF). The RPUF were incorporated with the treated AP at three weight fractions (c.a. 0.1, 0.5, and 1.0 wt%) and were produced by the free rising method. The results showed that the studied IL promoted a better interaction between the AP and the RPUF system, which increased the overall reactivity, imparting a higher cell anisotropy. This also yielded a positive effect in mechanical properties and thermal stability of the RPUF. Compared to the neat RPUF, outstanding increases of approximately 50 and 20% were achieved in compressive modulus and strength, respectively. In all, the use of IL promoted increased compatibility between matrix and reinforcement, especially that HO₂C IL.     

Graphene oxide-containing isocyanate-based polyimide foams: Enhanced thermal stability and flame retardancy

Isocyanate-based graphene oxide-containing polyimide foams were synthesized by a semi-prepolymer method. In this method, while the first solution containing pre-polymer was derived from pyromellitic dianhydride and excess polymethylene polyphenylene isocyanate (PM200), the second solution contains dianhydride derivatives, water, catalysts, surfactants, and graphene oxide. PIFs were prepared with 0%, 0.25%, 0.50%, 0.75%, and 1% graphene oxide by weight, respectively. PIFs exhibited a minimum side reaction and urea generation was not seen for all PIFs instead of imide bonding. The addition of graphene oxide (GO) leads to a more close-packed structure. Therefore, crosslinking density and thermal stability of graphene oxide-containing polyimide foams increased. Upon the addition of 1% GO, almost seven times higher compression strength was obtained compared to neat PIFs. Also, LOI values supported the theory that thermally stable and flame retardant PIFs can be synthesized via the isocyanate-based process with GO.