A rapid test to measure performance,emission and wear of a diesel engine fueled with palm oil diesel

Results of performance, emission and tribological evaluations of palm oil methyl ester and its blends with conventional diesel in an automobile diesel engine test bed are presented. Polymerization and carbon deposits on the fuel injector were monitored. CO, CO₂, O₂, combustion efficiency and temperature of exhaust gases were also measured. Palm oil methyl ester and its blends have great potential as alternative diesel fuel. Performance and exhaust gas emission for palm oil methyl ester and its blends with conventional diesel are comparable with those of conventional diesel fuel. Palm oil methyl ester does not pose a severe environmental problem and will not deteriorate engine and bearing components.     

基于混沌免疫粒子群优化和广义回归神经网络的回采工作面瓦斯涌出量预测模型

为提高回采工作面绝对瓦斯涌出量预测的精度和效率,提出了将混沌免疫粒子群优化(CIPSO)算法与广义回归神经网络(GRNN)相耦合的绝对瓦斯涌出量预测模型。该方法采用CIPSO对GRNN的光滑因子进行动态优化调整,减少了人为因素对GRNN网络输出结果的影响,并采用优化后的网络建立瓦斯涌出量预测模型。通过对某煤矿瓦斯涌出量数据的仿真实验结果表明:基于CIPSO-GRNN的回采工作面绝对瓦斯涌出量模型比BP神经网络、Elman网络预测模型具有更好的预测精度和收敛速度,证明了该方法的有效性和可行性。     

Ionic liquid as reaction medium for the synthesis and crystallization of a metal-organic framework: (BMIM)2[Cd3(BDC)3Br2] (BMIM = 1-butyl-3-methylimidazolium, BDC = 1,4-benzenedicarboxylate)

An ionic liquid, 1-butyl-3-methylimidazolium bromide, is used as reaction medium for the synthesis and crystallization of a coordination polymer, (BMIM)₂[Cd₃(BDC)₃Br ₂] (1) (BMIM = 1-butyl-3-methylimidazolium, BDC =  1,4-benzenedicarboxylate), which forms an anionic two-dimensional framework with the imidazolium cations located between the layers. This compound is thermally stable up to ca. 340 °C and exhibits blue emission in solid state at room temperature. Other characterizations by IR and UV–visible spectra are also described.     

火焰发射光谱法联合测定磷矿石和磷精矿中氧化钾及氧化钠

采用双通道的FP-640火焰光度计对磷矿中钾、钠元素进行联合测定试验。试验结果表明：在0．1％～1.0％区间内，K2O的相对标准偏差(RSD)为1．88％～2．93％，回收率为96．6％～102．7％；Na2O的相对标准偏差(RSD)为1．05％～2．10％，回收率为97．3％～101．2％。     

Field Validation of DNDC Model for Methane and Nitrous Oxide Emissions from Rice-based Production Systems of India

The DNDC (DeNitrification and DeComposition) model was tested against experimental data on CH₄ and N₂O emissions from rice fields at different geographical locations in India. There was a good agreement between the simulated and observed values of CH₄ and N₂O emissions. The difference between observed and simulated CH₄ emissions in all sites ranged from −11.6 to 62.5 kg C ha⁻¹ season⁻¹. Most discrepancies between simulated and observed seasonal fluxes were less than 20% of the field estimate of the seasonal flux. The relative deviation between observed and simulated cumulative N₂O emissions ranged from −237.8 to 28.6%. However, some discrepancies existed between observed and simulated seasonal patterns of CH₄ and N₂O emissions. The model simulated zero N₂O emissions from continuously flooded rice fields and poorly simulated CH₄ emissions from Allahabad site. For all other simulated cases, the model satisfactorily simulated the seasonal variations in greenhouse gas emission from paddy fields with different land management. The model also simulated the C and N balances in all the sites, including other gas fluxes, viz. CO₂, NO, NO₂, N₂ and NH₃ emissions. Sensitivity tests for CH₄ indicate that soil texture and pH significantly influenced the CH₄ emission. Changes in organic C content had a moderate influence on CH₄ emission on these sites. Introducing the mid-season drainage reduced CH₄ emissions significantly. Process-based biogeochemical modeling, as with DNDC, can help in identifying strategies for optimizing resource use, increasing productivity, closing yield gaps and reducing adverse environmental impacts.     

The removal of NOx from a lean exhaust gas using storage and reduction on H3PW12O40·6H2O

NO_x sorption and reduction capacities of 12-tungstophosphoric acid hexahydrate (H₃PW₁₂O₄₀·6H₂O, HPW) were measured under representative alternating conditions of lean and rich exhaust-type gas mixture. Under lean conditions, the sorption of NO_x is large and is equivalent to 37 mg of NO_x/g_HPW. Although a part of these NO_x remains unreduced, HPW is able to reduce some of the NO_x to produce N₂ by a reaction between the sorbed NO₂ and hydrocarbon (HC), but this process is slow. The addition of 1% Pt affects strongly the chemical behaviour occurring during the course of a rich operation. The NO desorption observed at the beginning of the rich phase is strongly accelerated. The direct correlation between NO₂ consumption and CO₂ production shows that the principal pathway is the reaction CO+NO₂→CO₂+NO. In a mixture of reducing gas (CO, HC, H₂), the competition is strongly in favour of CO though in its absence the reaction observed was the hydrogenation of propene to propane.     

Electrophoretic deposition of carbon nanotubes

Electrophoretic deposition (EPD) has been gaining increasing interest as an economical and versatile processing technique for the production of novel coatings or films of carbon nanotubes (CNTs) on conductive substrates. The purpose of the paper is to present an up-to-date comprehensive overview of current research progress in the field of EPD of CNTs. The paper specifically reviews the preparation and characterisation of stable CNT suspensions, and the mechanism of the EPD process; it includes discussion of pure CNT coatings and CNT/nanoparticle composite films. A complete discussion of the EPD parameters is presented, including electrode materials, deposition time, electrode separation, deposition voltage and resultant electric field. The paper highlights potential applications of the resulting CNT and CNT/composite structures, in areas such as field emission devices, fuel cells, and supercapacitors.     

A block copolymer nanotemplate for mechanically tunable polarized emission from a conjugated polymer

A polymer blend system consisting of polystyrene grafted onto poly (p-phenylene ethynylene) (PS-g-PPE) and poly (styrene-block-isoprene-block-styrene) triblock copolymer (SIS) yields highly polarized emission due to the unidirectional alignment of the PPE molecules. During the roll casting, the triblock copolymer microphase separates and creates unidirectionally aligned PS cylindrical microdomains in the rubbery PI matrix. PPE, a fluorescent conjugated polymer, was grafted with polystyrene (PS) side chains that enabled sequestration and alignment of these rigid backbone emitter molecules into the PS microdomains of the SIS triblock copolymer. Deforming the thermoplastic elastomer in a direction perpendicular to the orientation direction of the cylinders causes rotation of the PS cylinders and the PPE emitter molecules and affords tunable polarized emission due to re-orientation of the PPE containing PS cylinders as well as film thinning from Poisson effect.     

Influence of ash composition on heavy metal emissions in ash melting process

Two kinds of fly ash, discharged in the combustion of either refused derived fuel (RDF) or car shredder dust (SD), were examined for the emission of heavy metals in melting process under oxidizing and reducing conditions. The residual fractions of heavy metal in slag were experimentally estimated. As a result, it was confirmed that several volatile heavy metals were readily emitted during melting process. The type of atmosphere provided for the melting process was found to affect the emission of some volatile metals in RDF ash, but not in SD ash. The emission of volatile heavy metals in RDF ash under oxidizing conditions was lower than under any other conditions in this study. The emission behavior of iron and heavy metals in RDF ash under reducing conditions was similar to that in SD ash. These facts indicated that phosphorous in RDF ash had the property of fixing the volatile metals in the slag only under oxidizing conditions. Then the mixture of SD ash with phosphorous oxide powder was also tested in a melting process, and the result was consistent with the above inference of the effect of phosphorous.     

Damage evolution analysis in mortar, during compressive loading using acoustic emission and X-ray tomography: Effects of the sand/cement ratio

This paper explores the use of acoustic emission (AE) and X-ray tomography to identify the mechanisms of damage and the fracture process during compressive loading on concrete specimens. Three-dimensional (3D) X-ray tomography image analysis was used to observe defects of virgin mortar specimen under different compressive loads. Cumulative AE events were used to evaluate damage process in real time according to the sand/cement ratio. This work shows that AE and X-ray tomography are complementary nondestructive methods to measure, characterise and locate damage sites in mortar. The effect of the sand proportion on damage and fracture behaviour is studied, in relation with the microstructure of the material.