Combined PIXE and SEM study of the behaviour of trace elements in gel formed around implant coated with bioactive glass

Bioactive glasses are used as coating biomaterials to facilitate anchorage of metallic prostheses implanted into the body. The aim of this work is to study the behavior of gel formed in contact with alloys and BVA and BVH bioactive glasses implanted. Cylinders of metallic implants composed by Ti, Al and V, are coated with bioactive glass. Three sheep were implanted for different time length: 3, 6 and 12 months in the femoral epiphysis. Results obtained with particle induced X-ray emission and scanning electron microscopy show that BVA coating induces a better contact between the metallic implant and bone. On the other hand, BVH coating prevents corrosion from the metallic implant.     

FED制作工艺研究

本文介绍了我们开发的ＦＥＤ工艺，包括；硅锥场致发射阵列的制作，栅极制作，阳极支柱的制作和平板透明真空封装，对工艺中的难点及对策作了详细描述。利用上述工艺，已经制成了平板数码管，其栅阴特性理想，阳阴之间也能测得明显的场致发射特性产伴有荧光激发。     

显像管发射小的跟踪分析

本文对黑白显像管发射小进行了跟踪分析，认为阴极涂层脱落和管内真空度不良是导致显像管发射小的主要原因。     

Application of Rachinger''s method to separate overlapped doublets in the X-ray photoelectron spectrum

Rachinger's method of separating ₁ and ₂ doublets in X-ray emission spectra is applied for the first time to separate the superimposed doublets due to spin-orbit coupling. This method has been applied to separate closely lying doublets such as (Ag 4p_3/2and Ag 4p_1/2, (Ni 3p_3/2and Ni 3p_1/2) and (Cu 3p_3/2and Cu 3p_1/2). The intensities ratios of the separated peaks are measured and compared with the ratios obtained from a first-order calculation. An excellent agreement between the measured and calculated ratios are obtained. Residual background intensities compared with the estimated values are found to agree within certain uncertainties.     

Nd：碲酸盐玻璃的光谱和激光性质

对比了各种激光玻璃的光谱性质，指出碲酸盐玻璃是一咱理想的激光介质，并资产在室温下实现了钛宝石激光器泵浦了Ｎｄ：碲酸盐块体玻璃的激光发射，激光阈值４．２０ｍＪ，斜率效率１４．７％。     

非晶硅基薄膜的等离子体刻蚀光发射谱检测

本文研究了采用锁定放大相干检测技术的等离子体光发射谱检测系统。用该系统检测了仅用CF4作为刻蚀气体刻蚀非晶硅基薄膜的等离子体光发射谱。分析了检测结果和刻蚀机理。     

Does the use of Solar Home Systems (SHS) contribute to climate protection?

The paper addresses planners and decision-makers in the field of international development cooperation and also institutions concerned with the impacts of project- and technology promotion. The primary aim of the dissemination of Solar Home Systems (SHS) in off grid areas in developing countries is to improve the living conditions of the population in a cost–effective manner. A large-scale dissemination is essential both for significant contributions to development and for climate effectiveness. However, the contribution of SHS to climate protection is disputed. This analysis presents the most important parameters affecting the contribution of SHS to climate protection and quantifies the influence of those parameters. The case considered presupposes the commercial dissemination of SHS. Greenhouse gas (GHG) emissions are affected by the marketing decisions of the supplier of SHS. With regard to the impact on GHG emissions, a comparison is made between traditional lighting with petroleum lamps and the use of dry cell batteries to operate small devices (baseline case) on the one hand and SHSs on the other. The comparison shows GHG savings of around 9 tonnes of CO₂ equivalent GHG emissions within a 20-year period of use of one single 50 Wp SHS compared with the baseline case. The result is robust with respect to variations in GHG-affecting variables. Petroleum consumption and dry cell batteries dominate GHG emissions balances to such an extent that scarcely any importance can be attached to GHG emissions from the transportation and manufacture of SHS. Therefore, it is permissible to use simplified GHG inventories which ignore the GHG emissions arising from the transportation and manufacture of SHS. Therefore the conclusion is, if SHS are commercially disseminated and used cost efficiently to substitute kerosene and dry cell batteries they reduce GHG emissions effectively. In that case SHS can make a significant contribution to climate protection by the dissemination of large numbers.     

催化燃烧炉的节能性分析

传统的火焰燃气炉往往会产生不同数量的氮氧化物(NO和NO2)、一氧化碳等不完全燃烧产物,造成了环境污染和能源浪费.催化燃烧作为一种新的燃烧方式,打破了传统火焰燃烧的可燃界限,实现了贫甲烷/空气混合物在可燃界限以下的燃烧,燃烧效率高,提高了能源利用率.将催化燃烧应用于燃气炉,可以解决燃气炉由于火焰燃烧带来的燃烧效率低等缺点,达到节约能源的目的.以催化燃烧和燃气炉为依据,在催化燃烧炉Ⅰ型的基础上研制出催化燃烧炉Ⅱ型,分析了催化燃烧炉的热损失以及热效率,并与传统火焰燃烧炉做了比较.结果表明,催化燃烧炉Ⅱ型的热损失并不大,热效率较高,且其污染物排放量极低.     

Predictive modeling of mercury speciation in combustion flue gases using GMDH-based abductive networks

Modeling mercury speciation is an important requirement for estimating harmful emissions from coal-fired power plants and developing strategies to reduce them. First-principle models based on chemical, kinetic, and thermodynamic aspects exist, but these are complex and difficult to develop. The use of modern data-based machine learning techniques has been recently introduced, including neural networks. Here we propose an alternative approach using abductive networks based on the group method of data handling (GMDH) algorithm, with the advantages of simplified and more automated model synthesis, automatic selection of significant inputs, and more transparent input–output model relationships. Models were developed for predicting three types of mercury speciation (elemental, oxidized, and particulate) using a small dataset containing six inputs parameters on the composition of the coal used and boiler operating conditions. Prediction performance compares favourably with neural network models developed using the same dataset, with correlation coefficients as high as 0.97 for training data. Network committees (ensembles) are proposed as a means of improving prediction accuracy, and suggestions are made for future work to further improve performance.     

肝单光子发射计算机断层若干物理因素的讨论

我们于1985年对我院1984年开展肝单光子发射计算机断层以来的52例肝病人进行了分析总结。结果表明,肝单光子发射断层在诊断肝内占位性病变方面比普通肝静态γ照相有许多优点。需要指出的是,肝单光予发射断层的若干优点及诊断的准确性是与物理条件的正确选择和应用密切相关的。本文根据至今积累的近100例断层经验,从技术方面介绍了影响单