Kinetics of hydrogen evolution on submicron size Co, Ni, Pd and Co–Ni alloy powder electrodes by d.c. polarization and a.c. impedance studies

Submicron size Co, Ni and Co–Ni alloy powders have been synthesized by the polyol method using the corresponding metal malonates and Pd powder by reduction of PdO _x in methanol. The kinetics of the hydrogen evolution reaction (HER) in 6 M KOH electrolyte have been studied on electrodes made from the pressed powders. The d.c. polarization measurements have resulted in a value close to 120 mV decade^–1 for the Tafel slope, suggesting that the HER follows the Volmer–Heyrovsky mechanism. The values of exchange current density (i _o) are in the range 1–10 mA cm^–2 for electrodes fabricated in the study. The a.c. impedance spectra measured at several potentials in the HER region showed a single semicircle in the Nyquist plots. Exchange current density (i _o) and energy transfer coefficient () have been calculated by employing a nonlinear least square-fitting program.     

聚氯乙烯中杂质粒子的产生原因及解决措施

通过分析聚氯乙烯树脂中杂质粒子产生的主要原因，提出了在采购、保管、生产、清理、分析等环节的解决措施。     

PVC树脂中杂质粒子的来源及消除方法

系统地分析了PVC树脂中杂质粒子的来源和产生原因，提出了解决的方法。杂质粒子与所用原材料、设备、工艺、聚合配方组分及氯乙烯单体中的铁化合物有关。在配方中全用聚乙烯醇做悬浮剂时由于反应前后浓度变化大而容易产生自聚物和粘釜物而增加杂质粒子，加入少量纤雏素可稳定悬浮剂浓度。单体含酸含水所产生的铁锈与氯化铁形成有色胶状物是杂质粒子的重要来源，采用在合成工段滴加碱溶液的方法消除酸和氯化铁，避免胶状物的产生。     

溶液中钙离子对玻璃颗粒电泳沉积的影响

研究了玻璃颗粒在乙醇溶液中对Ca^2 的选择吸附，反转了玻璃颗粒在乙醇中的荷电性质，使玻璃颗粒能够在乙醇中与羟基磷灰石发生共沉积。讨论了不同离子浓度下电泳沉积的沉积量与沉积电流的变化情况，并以此对Ca^2 在电泳沉积中的作用进行了分析。实验结果证实：悬浮液中Ca^2 或吸附到玻璃颗粒上，改变其荷电性质；或留在溶液中，作为电泳沉积过程中电流的主要承载者。离子浓度对电泳沉积的效果有重要的影响，离子浓度太低或太高都易使涂层出现缺陷。分析了不同沉积条件下电泳沉积所得涂层的各种缺陷及其成因。     

Numerical computation for clustering of carbon particles with various sizes under both natural and magnetizing convections

The behavior of carbon particles from 0.01 to diameters in natural convection flow field of air was numerically studied including the effect of the magnetic field and the Brownian motion. One thousand carbon particles were released randomly in a vertical cylindrical enclosure whose height is equal to its radius. The enclosure was heated from below and cooled from above to produce the bulk flow of the natural convection of air in the atmospheric condition. A coil with electric current was set coaxially at the enclosure bottom to produce a magnetic field. Sample computations are carried out for the enclosure of 3 cm high and maximum magnetic field is 2.8 T or less. The results show that the natural convection of air is enhanced by the magnetic field. With the increase in the magnetic strength, more particles go along the fluid streak lines. With the increase in the particle size, more particles get together at the vortex center and cluster.     

Sintering of Confined Silica in Oxidized Silicon Particles

We observed electron-beam-induced sintering of amorphous silica in oxidized submicrometer silicon particles and analyzed the nature of mass transport in linear and triangular particle assemblies. The movement of silica around the rigid crystalline cores occurs rapidly and fills the necks, but the relative core positions in the sintered product depends on the initial geometry of the confined oxide. However, a thin layer of silica remains stable against the flow.     

基于模板法制备两亲性Janus纳米粒子及其应用进展

Janus粒子是同一粒子中含有两种不同化学组成的非对称结构,其中两亲性Janus粒子是在对立面分别含有亲水基、疏水基两种不同化学基团,作为一种新型纳米材料受到广泛的关注。该文综述了模板法制备不对称结构的两亲性Janus粒子以及其应用领域,包括硬模板法、软模板法、牺牲模板法以及无模板法;综述了两亲性Janus粒子在表面活性剂、牙科粘合剂、微胶囊、功能涂层、催化剂以及生物传感器等方面的研究进展。     

工艺因素影响焦炭颗粒耐压强度的试验研究

焦炭颗粒的耐压强度一直是焦炭颗粒最重要的性质之一。利用最近提出的表征焦炭颗粒耐压强度的新方法，就模压压力、加压方式、粒度组成范围、粒度大小、粒度配比等因素对单粒度或多粒度组成焦炭颗粒耐压 强度的影响进行了较为详细的试验研究。结果表明：（1）焦炭颗粒的粒度大小和粒度范围均可用其原始平均细度来表征。焦炭颗粒的原始平均细度越大，其耐压强度系数也就越高；（2）多粒度组成焦炭颗粒混合料的耐压能力比单粒度组成混合料的耐压能力要高得多。对多粒度组成焦炭颗粒而言，模压压力及粒度组成配比对其耐压强度系数的影响不甚明显；（3）分阶段缓慢加压到位比一次快速加压到位有利于提高焦炭颗粒的耐压强度系数。     

纳米二氧化钛制备方法研究

目前制备纳米二氧化钛粒子的方法很多,在总结归纳的基础上对各种制备方法所具有的特点进行比较,并指出了其优缺点和适用范围以及相关的研究进展.     

Ultrasonic spray pyrolysis of nano crystalline spinel LiMn2O4 showing good cycling performance in the 3 V range

Spherical lithium manganese oxide spinel was synthesized by an ultrasonic spray pyrolysis method, and has been characterized using X-ray diffraction, scanning electron microscopy, transimission electron microscopy and electrochemical cycling at 3 V regions. The LiMn₂O₄ powders were composed of about 10 nm-sized primary particles. The delivered discharge capacity of the synthesized nano-material was 125 mAh g⁻¹ between 2.4 and 3.5 V and its retention was about 96% upon 50 cycling. From the high resolution transmission electron microscopic study, it was found that structural transition of the parent material did not occur even after the 50th electrochemical cycling on the 3 V region. It seems that the reversible structural change is possible for nanocrystalline LiMn₂O₄ as observed by the X-ray diffraction and transition electron microscopic observations.