Prediction of cracking within early-age concrete due to thermal, drying and creep behavior

To predict potential early-age cracking after concrete placing, a numerical simulation procedure has been completed based on a micromechanical model and empirical formulas on the property development of young concrete. The numerical model could account for the effects of hydration, moisture transport and creep. Environmental influences, such as removal of formworks, curing conditions and variations of surrounding temperature and relative humidity, have been investigated. In calculating stress field with age caused by these synthetic physical-mechanical processes, three-dimensional finite element and finite difference (3D-FE-FD) methods are combined together.     

程潮铁矿大断面采准巷道稳定性数值模拟研究

针对武钢程潮铁矿采准巷道净断面尺寸增大，巷道稳定性下降的状况，采用数值计算方法对程潮铁矿巷道支护方案进行优化计算，并给出合理的支护方案。     

一种快速的海面特征SAR成像仿真技术

水下物体运动引起扰动，会在海面产生尾迹。这种尾迹特征同运动物体的参数和下潜的深度以及海况有关。研究这种尾迹特征及其合成孔径雷达(SAR)成像，就有可能利用SAR来检测这个水下运动物体。本文给出了一种水下运动物体的伴流尾迹的快速模拟方法及其合成孔径雷达(SAR)成像仿真方法，并对模拟仿真的结果进行了讨论。     

蚕庄金矿倾斜采场的地压研究

本文使用工程地质、室内试验及数值分析的方法对蚕庄金矿的倾斜矿房的地压活动规律进行了研究，得出了一些有价值的结论。     

Evaluation of a two-temperature control structure for a two-reactant/two-product type of reactive distillation column

Several different control structures have been proposed for reactive distillation columns. The appropriate control structure depends on the flowsheet and on the type of reactions occurring in the column. If two reactants are involved and if it is desirable to operate the process without any excess of reactant, it is necessary to manage the fresh feed streams so that the stoichiometry is exactly balanced. A composition analyzer that measures an internal composition in the column is often required. However, if two products are produced, it is possible to avoid the use of an analyzer by using two temperatures in the column to adjust the two feed streams. This type of structure was proposed by Roat et al. [Roat, S., Downs. J., Vogel, E., Doss, J., 1986. Integration of rigorous dynamic modeling and control system synthesis for distillation columns. In: Chemical Process Control—CPC III. Elsevier, Amsterdam.] for the ideal reaction A+B↔C+D in one of the earliest papers dealing with reactive distillation control.The purpose of this paper is to explore the effectiveness of this two-temperature control structure for various column designs (number of reactive stages) to quantify the impact of design on controllability. We also discuss the issues of the selection of the trays whose temperatures are to be controlled and the tuning of the two interacting temperature controllers. Disturbances in production rate and fresh feed compositions are made to examine the rangeability of this control structure. Both an ideal reaction system and the methyl acetate system are studied. One of the main conclusions is that the locations of the temperature control trays should be made such that the two temperature controllers both have direct action (an increase in temperature increases feed), which requires negative openloop process gains for both loops.     

特低渗油藏水平井布井方式研究

本文以西峰油田董志区长8油藏为例，运用数值模拟技术，研究了水平井组合方式及其井网形式。研究结果表明，水平井是提高特低渗油藏开发效果的有效途径。结合长庆特低渗储层吸水性能好的特点，认为采用直井注水，水平段走向垂直于储层最大主应力方位的水平井采油的井网组合开发效果最佳。     

Numerical simulation of slider dynamics during slider–disk contact

In this paper, the dynamic behavior of pico slider in contact with the disk was calculated. The analysis model consists of a simplified suspension model, an air bearing model, and a slider–disk contact model. The contact model consists of two elements. One is surface roughness model measured by Atomic Force Microscope (AFM) and the other is micro-waviness model. The dynamic behaviors of the tri-pad slider are calculated at several rotation speeds to investigate slider vibration modes during slider–disk contact. The slider oscillation frequency depends on the rotation speed and it saturates about twice as much as eigen frequency of air bearing pitch mode.     

一种改进的二自由度PID控制器

根据目标值滤波器型二自由度PID控制器，提出一种新型二自由度PID控制器。实验表明该算法使用可靠、精度高，而且具有较强的抗干扰能力和鲁棒性，可大大提高系统的控制品质。     

数字通信系统设计中FPGA的仿真

在大规模的FPGA设计中，由于逻辑过于复杂，给仿真与调试工作带来很大难度。本文结合“实用化综合接入系统”边缘路由器子系统的设计，结合仿真软件提供的接口，提出用测试程序自动生成测试向量，自动完成仿真结果检查的方法，大大降低了仿真与调试的工作量。