掺杂对共沉淀法制备的锰锌铁氧体性能的影响

通过加入添加剂,制备了晶相单一、结晶度完好、具有较好磁性能的锰锌铁氧体纳米晶,然后研究添加剂对铁氧体晶相、磁性能和居里温度的影响.研究结果表明:添加剂可以使晶体生长更完善,晶粒变大;同时可以改善样品的磁性能,降低居里温度.     

我国塑料助剂生产现状与发展趋势

简述了我国塑料助剂生产现状、市场供需及发展方向，“十五”期间我国塑料助剂工业发展势头强劲，目前已基本满足我国塑料工业的发展需求，但是在品种和产品质量等方面与国外先进水平相比仍有较大的差距。提出了提高我国塑料助剂国际市场竞争力的措施。     

Effects of diacrylate monomers on the mechanical properties of polymer concrete made with wet aggregates

Because normal polymer concrete does not work well with wet aggregates, diacrylate (DA) monomers were evaluated for improving the mechanical properties of polymer concrete made with wet aggregates. Zinc diacrylate (ZDA) and calcium diacrylate (CDA) were each used as an additive to resins (two epoxies). The variables were the amount of diacrylate monomers and the aggregate conditions (wet or dry). Compressive strength, flexural strength, workability, working time, and curing time were measured. ZDA was found to improve the workability and the working time, and CDA was found to improve the compressive and the flexural strength. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 1077–1085, 2004     

黄原胶的结构、性能与应用

简要介绍了黄原胶的结构、性能;综述了它在化学工业及食品工业中的应用;重点论述了黄原胶作为悬浮剂、乳化剂、稳定剂、增稠剂等在日用化学工业中的应用,具有优良的悬浮性、乳化性、流变性、热稳定性及酸、碱稳定性;最后指出了我国在黄原胶应用方面的不足及以后的发展方向。     

水煤浆添加剂及其研究进展

介绍了水煤浆添加剂结构特征对煤成浆性能影响的研究情况及新型高效添加剂的研究进展。目前制浆添加剂主要分为阴离子表面活性剂和非离子表面活性剂;我国与国外的水煤浆添加剂技术相比,还存在一定的差距,特别是分散降粘性质方面,高效、价廉、适用性广的添加剂为数并不多。     

微波烧结Al2O3-TiC复合材料的研究

以纳米级TiC、Al2 O3 为原料 ,用微波烧结制备Al2 O3 -TiC复合材料 ,并与常规烧结比较。分析了两种烧结方法对制备试样的力学性能的影响 ,并探讨了添加剂对Al2 O3 -TiC复合材料烧结性能的影响     

食品级、医药级磷酸三钙生产工艺

采用改进的固相反应法，以碳酸钙和工业磷酸为原料，制备食品级、医药级磷酸三钙(TCP)产品，研究了CaO与P2O5物质量的比、助剂加入量、反应温度对产物化学组成结构的影响；用X射线衍射(XRD)研究了产品的物相结构。提出了该工艺的反应机理，并确定了在技术上、经济上可行的工艺路线。分析结果表明，可以得到高品质磷酸三钙，产品质量指标符合FCC、USP和EP标准。     

一种能够抑制锂枝晶的锂金属电池电解液润湿性添加剂

将氟代有机溶剂2,2,3,3-四氟丙基甲基丙烯酸酯(TFPMA)作为双功能添加剂引入碳酸酯电解液体系,考察了TFPMA质量分数对增大润湿性的影响.采用交流阻抗、恒流充放电等测试了添加TFPMA后的锂金属电池性能.采用SEM和XPS表征了循环后的锂金属电极表面.结果表明,1.0％(质量分数,下同)TFPMA的添加使电解液与隔膜间的接触角从54°降至44°,内阻从6.15Ω降至1.94Ω,Li-LiFePO4电池在5 C电流密度下的比容量从66 mA·h/g提升至80 mA·h/g,1 C电流密度下的恒电流循环在100圈时还保持99％以上的库仑效率.TFPMA还促进了Li+的均匀沉积和优良固体电解质界面膜的形成,抑制了锂枝晶,电解液添加了1.0％TFPMA后,Li-Cu电池可以循环100圈以上,而库仑效率没有发生较大下降.循环后电极的SEM图表明,添加了1.0％TFPMA电解液的锂金属负极表面沉积更加平整,有较少的锂枝晶生成.     

Effect of poly(ethylene glycol) on the hydrophobic interactions and rheology of proanthocyanidin biopolymers from Pinus radiata

The rheology of solutions of extracts from the bark of Pinus radiata was investigated in the presence of poly(ethylene glycol)s (PEGs) of different molecular weights. PEG with a molecular weight of 4600 (1% w/w) was sufficient to reduce the viscosity of a concentrated (40% w/w) pine tannin extract by one order of magnitude. The reduction of the viscosity was due to the inhibition of molecular association via hydrogen bonding and hydrophobic interactions between tannin and PEG and depended on the molecular weight of PEG. PEG effectively reduced the viscosity of polyphenolic tannins but retained high reactivity toward paraformaldehyde for adhesive formulations. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 1254–1260, 2005     

Characteristic properties of cutting fluid additives derived from the adducts of diamines and acid chlorides

A number of N,N′-diacylalkyldiamines were prepared from the reaction of acid chlorides with 1,8-diaminooctane and 1,12-diaminododecane and screened for anti-rust properties and antimicrobial activity in spent coolants of water-based cutting fluids. Aqueous solutions of N,N′-dihexanoyl-1,8-diaminooctane and N,N′-isobutyroyl-1,12-diaminododecane showed good anti-rust properties for water-based cutting fluids. Aqueous emulsions of N,N′-dibutyroyl-, dipentanoyl-, dihexanoyl- and dioctanoyl-1,12-diaminododecane showed good lubricities and antimicrobial activity for water-based cutting fluids.