Development of calibration models for quality control in the production of ethylene/propylene copolymers by FTIR spectroscopy,multivariate statistical tools,and artificial neural networks

Principal component regression (PCR), partial least squares (PLS), StepWise ordinary least squares regression (OLS), and back‐propagation artificial neural network (BP‐ANN) are applied here for the determination of the propylene concentration of a set of 83 production samples of ethylene–propylene copolymers from their infrared spectra. The set of available samples was split into (a) a training set, for models calculation; (b) a test set, for selecting the correct number of latent variables in PCR and PLS and the end point of the training phase of BP‐ANN; (c) a production set, for evaluating the predictive ability of the models. The predictive ability of the models is thus evaluated by genuine predictions. The model obtained by StepWise OLS turned out to be the best one, both in fitting and prediction. The study of the breakdown number of samples to be included in the training set showed that at least 52 experiments are necessary to build a reliable and predictive calibration model. It can be concluded that FTIR spectroscopy and OLS can be properly employed for monitoring the synthesis or the final product of ethylene–propylene copolymers, by predicting the concentration of propylene directly along the process line. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

二次电池电极基板用复合多孔金属材料的研究

介绍了一种复合金属多孔体的制备及其方法，首先以泡沫塑料为芯膜，经过导电化处理使其具有导电性，其次进行电沉积金属铁，再进行电沉积金属镍，经过热处理后可制备出复合金属多孔体。该复合金属多孔体用铁取代金属镍，其抗拉性能优于单质泡沫镍，同时可以降低制造成本，主要用于载体如电池电极。     

日产1000t水泥熟料生产线的提产措施

通过对五级旋风筒下料管、回转窑转速、配料方案、物料稳定等四方面进行改进,达到提产目的。     

Hydrogen production from methane in a dielectric barrier discharge using oxide zinc and chromium as catalyst

The hydrogen fuel cell is a promising option as a future energy resource; however, the nature of the gas is such that the conversion process of other fuels to hydrogen on board is necessary. Among the raw fuel resources, methane could be the best candidate as it is plentiful. In this experiment, the possibility of producing hydrogen with less carbon formation from methane by a dielectric barrier discharge (DBD) was investigated. Without the addition of a catalyst, the formation of hydrogen reached between 30% and 35% at methane residence time of 0.22 min and supplied powers in the range of 60-130 W. The hydrogen selectivity increased at higher supplied power, but the process efficiency, defined as a ratio of the produced hydrogen to the supplied power, decreased slightly. In order to boost the hydrogen production with less carbon formation, a mixed oxide catalyst of zinc and chromium was added to the reactor. It was shown that the production of hydrogen was ca. 40% higher than the non-catalytic plasma process.     

Optically tuned superconductive-dielectric resonators with whispering-gallery modes

An analytical method is presented for calculating the resonant frequency andQ-factor of a superconducting dielectric disk resonator operating in millimeter-wave regime with whispering-gallery mode. Resonant frequency shift due to the optical generation of quasi-particles in superconducting film is investigated as a function of photon flux. An optically tunable resonant frequency of about 500 MHz is estimated, and good agreement is found between numerical results and experimental ones.     

The method of testing of XLPE cable insulation resistance to partial discharges and electrical treeing

The paper gives a method of model XLPE medium voltage cable insulation testing for partial discharges and electrical treeing with a point to plane test geometry. Based on this method, a comparative estimate of insulation resistance to treeing and partial discharges have been made. XLPE crosslinked by different methods (steam medium and hot nitrogen medium) and with varying contents of inorganic filler kaolin were tested. The characteristics of partial discharges were measured by means of a pulse height analyser characterized with a microscope. The data have been analysed statistically.     

Constraints on benthic algal response to nutrient addition in oligotrophic mountain rivers

Nutrient availability has long been considered one of the most important factors regulating production of benthic algae in oligotrophic rivers; yet, empirical relationships do not have as wide an application as similar models derived for lentic systems. The aim of this research was to derive empirical relationships between nutrient concentrations and benthic algal abundance and to identify commonalities with other studies to improve our understanding of constraints on algae in oligotrophic rivers. Surveys of physical, chemical and biological attributes of oligotrophic mountain rivers in spring, summer and autumn for 2 years confirmed that small amounts of anthropogenic phosphorus (0.1–5.6 µg/L total phosphorus (TP)) resulted in 4‐ to 30‐fold increases in abundance of benthic algae and benthic macroinvertebrates (BMIs). Algal accrual along a gradient in nutrient availability was not masked by grazing pressure but was positively correlated with abundance of scrapers. Epilithic abundance was highest downstream of anthropogenic nutrient sources in autumn. We concluded that benthic algal abundance in these mountain rivers was weakly correlated with phosphorus availability if light was not limiting but ultimately controlled by temperature and river discharge. Therefore, we recommend more direct measures of nutrient limitation be used to predict changes in ecological integrity at the lower end of the resource gradient. Copyright © 2007 John Wiley & Sons, Ltd.     

Synthesis of nanophase tungsten carbide by electrical discharge machining

Tungsten carbide nanopowders were synthesized successfully by electric discharge machining followed by annealing under a nitrogen atmosphere. The tungsten workpieces were initially melted and evaporated on the working surface during the electric discharge machining process, and then the tungsten powders were reacted with the carbon electrode and the working medium of kerosene to form the nanocrystalline WC_1−x powders. The powders produced were characterized by XRD, SEM, and TEM. When annealing the powders under an N₂ atmosphere, the cubic phases of WC_1−x gradually changed to hexagonal W₂C and then were transformed fully to nanocrystalline hexagonal WC at 1200 °C, with the nanocrystalline tungsten carbide encapsulated in a carbon shell. On the other hand, under an H₂ atmosphere, the WC_1−x phase changed via a W₂C phase to reduced powders of pure tungsten at 1000 °C or were reduced directly from WC_1−x to elemental W.     

THE ANALYSIS OF THE SEPARATED LAYERS ALGORITHM BY DOMAIN DECOMPOSITION METHOD

From the principle of of the Domain Decomposition Method (DDM), we analyse the 2nd-order linear elliptic partial differential problems and link the Separated-Layers Algorithm (SLA) with DDM. The mathematical properties of SLA and numerical example are presented to obtain satisfactory computation results. For general linear differential ones, also are the structure of SLA and its characteristics discussed.